Used Double Bulk Feeder With Weight for sale (67,481)

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm Dodpsv Sva Esfx Af Asci maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Dedpfx Aevuuk Isf Asci Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t Dsdovuukbepfx Af Aeci stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm Dodovuk Naspfx Af Asci ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA)

Condition: used, Year of construction: 1997, pressure 130 t Dcjdpfx Asvuugcef Aji distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm Dcedpfx Afevuk H Ej Aoi table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2010, pressure 315 t distance between columns 1800 mm stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1800 x 1000 mm table height over floor 900 mm die cushion pressure in table 80 t die cushion stroke in table 100 mm Die cushion area in table 1300 x 600 mm side window 600 mm ram surface 1800 x 1000 mm speed down 400 mm/s speed up 300 mm/s Dcedpfx Asvuubmof Aji working speed 15 - 80 mm/s oil volume 1700 l power requirement 55,0 kW weight 27,5 t dimensions (WxDxH) 3,1 x 2,2 x 4,6 m year of manufacture 1980 - modernization 2010 with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s Dcodpfx Afovut Tbs Aoi speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t Dcodpfx Afovut Rys Asi die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm Dsdpfx Afeyx Ii Do Asci hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data Dcodpfxszhlg Ao Af Aji • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: good (used), Year of construction: 1997, Storti Multibi 18 Dcedpfx Afsziavbe Aoi 180mm cutting height Double shaft 2 x 45kW

Condition: used, Crane track rails – steel beams HE-B 300 from an 11-meter long hall Beam width: 300 mm Beam height: 300 mm Middle web: 11 mm Track rail: 50 x 30 mm Beam length: 2 x 10550 mm (total length 21100 mm) - A 5-ton crane ran on these crane track rails. - It was installed in a 10-meter hall. - The beams are one-piece, without a butt flange joint. - Consisting of 2 x 10550 mm Dcedpfxozinz Eo Af Aoi - White painted Self-weight per meter of crane track rail: 120 kg + 11.7 kg = 131.7 kg/m Self-weight of the crane track rails: approx. 2780 kg

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). Djdpfoxb U Txjx Af Aeci -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Dedjy R Ndaopfx Af Asci Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 9 mm Front right - 9 mm Middle left - 10 mm Middle right - 9 mm Rear left - 16 mm Rear right - 16 mm

Condition: used, Colour: White Empty weight: 4.000 kg Dimensions (LxBxH): 500 x 260 x 150 cm - Documentation available: No - CE certificate present: No Dsdpfxjzi U Ufs Af Aeci - Max. working width [mm]: 2700 - Transport dimensions: 5000mm x 2600mm x 1500mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Colour: Grey Empty weight: 4.500 kg Dimensions (LxBxH): 500 x 290 x 180 cm - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 6574 - Max. working width [mm]: 2800 - Transport dimensions: 5000mm x 2900mm x 1800mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Dcsdezi U T Iopfx Af Aei

Condition: used, Year of construction: 2007, Stream feeders Müller Martini 3738 Year: 2007 Dcsdpfezi Sdksx Af Aei Description: - Stream feeders: 6 x

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Dodpfx Asvuuh Tsf Ajci Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm Dcjdpfevuuhgsx Af Asi pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Dodpfju Uvv Tox Af Aoci

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Djdpsxzu Rqefx Af Aoci Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: good (used), Year of construction: 2007, I will sell a feeder for salt, feed, etc. Dcsdpfxov A Rqms Af Aji

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm Dcjdpfx Asyx Impef Aoi capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Year of construction: 1999, condition: used, Angle display: digital Djdpey A Hikefx Af Ajci Length stop flap measurement display: digital