Used Dust Extraction,Filtration Teka for sale (8,050)

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg Ndedpjz A Thnofx Ab Usb

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Nsdpfx Abezukp As Uodb Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance Ndsdpfohp S Trex Ab Ueb is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm Ndedpfx Ajkm Ryneb Ujb ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Ndjdpfxjz Dv Dne Ab Ujb

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar Ndedpeyb Th Ajfx Ab Usb - Operating temperature: 4 – 70 °C

Condition: used, functionality: fully functional, Used Teka fume extraction unit for wall mounting. Can also be placed on the floor, as a stand is included (custom-built by the previous owner). A new control unit has been installed. Nedpfozzwhxex Ab Uodb Connection options: 2x D150. The extraction unit runs smoothly; a new silencer is included.

Year of construction: 2007, condition: used, functionality: fully functional, DANTHERM NFZ 3000 Dust Extraction / Filter Unit – 9,000 m³/h Reliable and high-capacity dust extraction (air filtration) unit for sale, suitable for woodworking, furniture manufacturing, and other industrial applications. Technical Specifications: Filter area: approx. 150 m² Model: NFZ 3000 Year of manufacture: 2007 Collection bags: 6 pcs. Fans: 3 pcs. (3 sections) Airflow capacity: approx. 9,000 m³/h Inlet connection: Ø 630 mm Dimensions: Njdozlgm Ejpfx Ab Uedb Length: 3,600 mm Width: 2,400 mm (+ approx. 1,000 mm fan overhang) Height: 5,400 mm The unit is designed for efficient collection of dust and wood shavings and is suitable for a wide range of industrial production facilities. It features a robust construction and is easy to maintain. Condition: Used (fully operational) Price: Negotiable

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Ndodpozxr R Ajfx Ab Uob

Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Njdpfszav Ebjx Ab Ujdb Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Filterabreinigung / Display-controlled filter cleaning Ventilatorsteuerung / Fan Control Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99% Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm Njdpju Aafdefx Ab Uedb - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation Nsdpfx Abjyz Dile Usdb

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Ndjdpjmf Uzxefx Ab Ueb Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting Nedpfx Abeunh Uvj Uedb The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Ndjdpfx Aeryxmxjb Ueb Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Ndsdpfx Aeupv U Hsb Ujb Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Year of construction: 2005, Concrete mixer TEKA TZK 2.0 Mixing capacity: 2 m³ Ceramic lining inside Ndjdpfxoywn T Ts Ab Uob Not yet dismantled

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Nodpfx Abjr A El Ej Usdb Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2016, operating hours: 10,000 h, machine/vehicle number: 978002, input voltage: 230 V, total width: 580 mm, total length: 580 mm, total height: 2,600 mm, noise level: 72 dB, space requirement height: 900 mm, suction capacity: 1,600 m³/h, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, input current: 7 A, We offer this used TEKA Filtoo welding fume extraction unit, year of manufacture 2016. Item number: 978002 Power: 1.1 kW Voltage: 230 V Frequency: 50 Hz Current: 7.0 A Serial number: P26012210011016 Year of manufacture: 2016 Ndedpfx Ajy N I Rveb Usb If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, Ndedpfx Asv Tb A Ijb Uob 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. For further information, see the rating plate.

Condition: new, volume capacity 2500 m3/h 0 3000 mm Nodpfx Abefrzt Uo Uedb total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Ndjdev Taq Rspfx Ab Ujb Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove) Nedpfx Aoy Au Arjb Uedb

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing P/N: 5052164040 Diameter: 16"x4 Nodpfx Ajyq Ryhsb Uodb Volume: 191L Year: 2015 Pressure PS: 0-8 Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. Ndsdpfx Abeq Nw Uqe Usb ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.