Used Face Plate 5144 for sale (11,691)

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW Iedpfx Aeua Iulsn Dsia weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: good (used), functionality: fully functional, Year of construction: 1980, 2500 mm x 340 Ømm top roller Iisdpfeyz Acwjx An Dsa Rolling capacity: 2500 x 23 mm (5 x top roller diameter) Max. sheet thickness: 2500 x 15 mm Equipped with top crane and side support

Condition: good (used), Plastic sheets, plastic laminate, spring plates, leveling plates -Manufacturer: Lista, plastic spring plates, 210 pieces -Plate: 280 x 60 x 8 mm, 40 pieces -Plate: 40 x 60 x 1 mm 170 pieces -Sale: only complete set Iedpfsgrvdqsx An Deia -Total weight: 11 kg

Condition: ready for operation (used), Working width: 1250mm, maximum sheet thickness: 3mm. An on-site inspection is possible. Iisdpfxoy Aaf Ee An Dea

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 2,25,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Iisdpfxeyvgauj An Dja Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: used, Year of construction: 2010, Supper mini mill specs X 406mm Y 305mm Z 254mm . Max speed 10000 RPM . Power 15 HP (11.2 KW) . Taper CAT 40 / BT40 Iedpjy D A S Defx An Dsia

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Iisdpfx Aekwcc Nsn Dsa Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Iiedpfx Anokvm Szs Dja Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Ijdskvm S Nepfx An Deia Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1953, working width: 2,040 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, We offer this used plate rolling machine C.A. Fastenrath 1906/8, year of manufacture 1953. Iiodpfeyxy Thox An Dsa Year of manufacture: 1953 Serial number: A533 Type: 1906/8 Maximum working width: 2040 mm Maximum material thickness: 1.5 mm For any questions or further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1980, sheet width 3000 mm plate thickness 6 mm Iisdpfx Anevxwiho Dsa cutting angle quantity of oil 150 l total power requirement 15 kW weight of the machine ca. 6,2 t dimensions of the machine ca. 3,9 x 2,2 x 1,7 m Front stop on the left, 2 support arms, motorized rear stop, manual adjustment of the cutting gap, 1 set of spare knives

Condition: new, Year of construction: 2026, 3050 mm 13,0 mm 0,5-2,5 ° Iiodpfx Anowp Tduo Dea 1000 mm work height max. 900 mm

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm Iedpfx Ajyv N I Asn Deia thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1977, sheet width 3050 mm Ijdpjyv Nzcjfx An Dsia plate thickness 6 mm weight 7.000 kg range L-W-H 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch

Condition: used, Year of construction: 1990, sheet width 2500 mm plate thickness 4 mm cutting angle 1,49 ° 40-80 column arm 200 mm Number of hold downs 13 Stück back stop - adjustable 5-1000 mm table height 750 mm oil volume 85 l Iiodpfxjyv Nx Io An Dsa air pressure - required 5 bar range L-W-H 3100x1900x1500 mm weight of the machine ca. 3.600 kg Accessories: -Control RAS Multicut 2000 -Sheet metal holding device -Foot switch -Angle stop -Sheet metal support arms -Side protective grilles

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop Iodpfx Aeyv Nt Ssn Doia - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms Iisdpfx Anjyv Nn Ao Dea - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MC0 35100, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, roller diameter: 1,000 mm, sheet thickness (max.): 130 mm, sheet thickness steel (max.): 130 mm, total length: 3,500 mm, power: 240 kW (326.31 HP), Technical details Max. bending width: 3,500 mm Max. sheet thickness: 200 mm Total power requirement: 160 kW Smallest roll-in diameter: 770 mm Iiedpfjyn Agbox An Dsa Maximum cylinder pressure: 2 x 2 t Top roll Ø1000 mm Bottom rolls Ø900 mm

Condition: used, Year of construction: 1990, sheet width 2000 mm plate thickness 1,5 mm Iijdpfx Aoyv I Tqsn Dea

Condition: good (used), Panel size: 1500 x 4000 mm panel height: 370 mm Thickness of the top plate: 50 mm Working height when assembled: 870 mm Weight: 6,8 t Iisdpsdzln Ujfx An Doa

Condition: good (used), Length: 1000 mm Width: 600 mm Ijdpfx Anof D Sp So Djia Plate height including ribbing: 135 mm Plate edge height: 35 mm Weight: 152 kg

Year of construction: 1966, condition: used, machine/vehicle number: 4661, working width: 5050 mm metal sheet thickness: 10 mm power: 30 kW space needed: 2450 x 5600 x 2500 mm Iiodpfxob N Ercs An Dea weight: 28000 kg

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm Isdpfxsb N Erbj An Dsia rear stop: 1000 mm power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Isdpfxebn Amfo An Dsia Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: used, width: 1005 mm length: 1600 mm plate thickness incl. ribbing: 150 mm thickness of upper plate: ca. 30 mm table height over base: 750/850 mm Iiodsb Nxn Eopfx An Dja weight: ca. 700 kg weight of adjusting feet: ca. 200 kg