Used Fezer Cutting Circular Saw for sale (15,483)

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016. Dcjdpfx Aey Dtpmoa Nog

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm Dcsdpeygx Dyjfx Aa Njg spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, HSS circular saw blades for steel machining Dcsdpec R Tyqsfx Aa Neg with some secondary holes: 315 x 2.5 x 32 mm, 90 Z 315 x 2.5 x 32 mm, 98 Z 225 x 1.9 x 32, 90 Z

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm saw blade rotations: 6300 rpm Dcodob H Infspfx Aa Njg electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm Dodpfx Aeyv N Naea Necg capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg Dcodjyv Nvtopfx Aa Neg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, saw blade diameter: 500 mm, Double mitre aluminium circular saw Dsdpjy Av T Eofx Aa Nocg in semi-automatic design Mitre range 90° -45° R/L -60° left Drive 4.0 kW-400 V/50 Hz Saw blade speed 50 m/s Saw blade dimensions Ø 500 x 30 x 4.0 mm Dimensions 1488x960x1540 mm Table height 1067 mm Weight 500 kg Accessories: - 5 m infeed roller conveyor 230 mm - 3 m outfeed roller conveyor 230 mm with digital measuring stop

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm Dcjdpfsd Rxw Sox Aa Njg cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm Dcjdpfx Aaefnrw So Nsg cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: used, disk of circular saw-Ø: bis 250 mm Djdob N Ehdopfx Aa Njcg cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm weight: 355 kg

Condition: excellent (used), machine/vehicle number: 68131, Cut-off saw Ø max .: 300 mm here cutting area round: 100 mm Saw head can be swiveled up to: 45 ° Vice clamping range up to: 160 mm Dcodsfug Exjpfx Aa Nog Cutting saw speed: 2500 rpm Drive motor: 230 V, 1.1 kW Required space: 850 x 750 x 1500 mm Weight: 126 kg

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm Dcodpfsb Sciaex Aa Njg cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: used, for saw blade Ø up to approx.: 280 mm here cutting height approx.: 70 mm saw blade speed: 2600 rpm Dsdpfxsb Nwgnj Aa Necg drive motor: alternating current 220 V, 1,47 kW Space requirement: 670 x 520 x 800 mm Weight: 31 kg

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm Dcjdpfxebbbhne Aa Njg weight: 355 kg

Year of construction: 1966, condition: used, machine/vehicle number: 7293, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 110 mm cutting speeds: 10 - 44 m/min forward feed speeds: 0 - 500 mm/min cutting length: 10 - 500 mm electrical connection: 380 V sawing drive: 4 kW space needed: 1360 x 2650 x 1850 mm Dsdebr Hwdopfx Aa Necg weight: 950 kg

Condition: new, Carbide tipped circular saw blades for aluminium machining with the following dimensions: Dsdpfec R Ty Aex Aa Njcg 300 x 3,3 x 32 mm, 72 Z 350 x 3.2 x 20 mm, 84 Z 350 x 3.4 x 32 mm, 56 Z 350 x 3.4 x 32 mm, 72 Z (ground) 355 x 2.2 x 25 mm, 66 Z 350 x 4.2 x 34 mm, 54 Z

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm Dcedpfx Aasb N Eics Nog rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm Dcedpfx Ajz N Amja Nog weight: ca. 1800 kg

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm Dcodpfsm Twgwsx Aa Njg cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: excellent (used), Saw blade diameter: 360 mm Cutting range at 90° round: 110 mm Dcsdpfx Aev D Hzkea Nsg Cutting range at 90° rectangular: 110 x 400 mm Cutting range in miter at 45° round: 110 mm Cutting range in miter at 45° rectangular: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space required: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity Dcsdpfxox Ek A To Aa Njg at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Dsdeyh Hn Hjpfx Aa Njcg Weight: 50 kg

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Dodpfxol Ra Uio Aa Nscg Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min Dcedpjhz T Hfofx Aa Nog engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm Dsdpfxoh I Dvns Aa Nscg cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg