Used Fransson Tra-50 Wood Shredder for sale (51,191)

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3-phase Blades: multiple, rotatable Hydraulically operated slide Screen opening as desired (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features include: - Automatic star/delta starter - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times Laodpfx Alsd Dgw Usyeh - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF boards, and other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Rising section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-band magnet + €5,980 net - Control system for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - Moisture content (as received) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Lodsr R Ewlepfx Alyeah Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: excellent (used), CATALOGUE NUMBER 7176 TECHNICAL SPECIFICATIONS - Hopper inlet 1050x600mm Ledpfjzxg Snox Alyoah - Outlet for shredded wood, diameter 160mm - Rotor working width 590mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Screen: 10x12mm - Clamping drawer - Electric auto-reverse - Dimensions (L/W/H): 1900x1200x1530mm - Weight: 990kg ADVANTAGES - Auto-reverse - German-made - Unpainted - Similar to WEIMA WL4 - Clamping drawer - Very good condition - Used wood chipper Net price: 48900 PLN Net price: 11372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,820 kg, 1 new hopper-type shredder DH 600, 18.5 kW Lajdpomv Eh Nefx Alyjh Rotor width: 600 mm Rotor diameter: 220 mm Number of knives: 28, concave ground, four-way reversible Motor power: 18.5 kW Electrics: 400V, 50 Hz Control: control cabinet, fan-cooled, Siemens PLC Hopper opening: extended hopper Hopper volume: approx. 0.60 m³ Screen: 20/25 mm or as required Hydraulics: 40-liter tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1–3 m³/h, depending on material and screen size Extraction nozzle: 160 mm Extraction capacity: min. 28 m/s

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Lasdpfxeytn Tds Alyoh Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Ljderq Eu Ropfx Alyoah Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: new, Year of construction: 2026, production time appr. 4 months Lasdpjd Hkqhsfx Alyoh * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Laedpjvw Tw Eofx Alyoh Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm Laodeyx Digjpfx Alyjh

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear Lasdpfxozrm T Se Alyjh overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Laodpfx Aljiq U A Soyoh ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Laedovyp Avepfx Alyjh Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table Lajdpfjz A Tg Djx Alyjh - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992 OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Ljdpfoy Emnxox Alyoah

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Location: NRW Total operating hours: 476 h Lajdpfx Aljzcn Igsyoh Engine operating hours (new): 91 h Rotor operating hours: 207 h Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: ready for operation (used), Year of construction: 1999, EUREC Model Z85 Twin-Shaft Tracked Shredder, complete with folding discharge conveyor Year: 1999 Weight: 32 tons Dimensions: Shredder feed opening width: 2.30 m Shredder feed opening length: 1.80 m Shaft length: 1.85 m Conveyor length: 8.60 m Conveyor width: 1.40 m Lajdpfey Id I Iex Alyoh Hopper length: 5.40 m Hopper width: 2.50 m Engine: CUMMINS 6-cylinder turbocharged, 462 hp Engine power: 336 kW Complete with documentation Ideal for the following materials: waste, plastics, wood, light metals, bulky waste, aluminum, sheet metal, etc.

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system with a screw conveyor is an efficient industrial setup designed to process large volumes of materials into smaller, more manageable pieces. ♻ The system consists of a powerful shredder capable of breaking down various materials and a screw conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal. Technical data: Shredder: ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 939 x 567 mm Lajdpfotpuqyox Alyeh ✔ Weight: 1250 kg Screw/snail conveyor: ✔ Length: 4300 mm ✔ Height: 2800 mm ✔ Power: 1,5 kW 1 years warranty or 1000 working hours

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz• • Hopperopening 1600 x 700mm Lasdpfx Alsf Sgcboyeh • Main dimensions L 2400 x B 850 x H 1600mm • Outlet opening ca 400x 140mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1300 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm Laodpfxohwwpze Alyjh ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm Laodpfxoiq U D Ee Alyeh ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg Lodpfx Ashzlr Iolysah 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Lajdpfezqz Sgex Alyoh Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Lsdpfxjzqz T Rj Alyjah Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: used, WAFIOS Straightening and cutting machine Model R7/50 Working range Lsdjymcfbopfx Alyoah - Diameter: 1,5-7 mm - Cutting length: 2000 mm - Speed: 19-50 m/min - Motor power: 7,5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, • 22 kW electric main motor • Maximum material width: 550 mm • Maximum cutting width: 410 mm • Minimum material thickness: 18 mm • Maximum material thickness: 100 mm • Minimum board length: 800 mm • Minimum cutting width: 6 cm (trimmer), 2 cm (multi-blade saw) • 5 circular saws – 4 fixed and 1 movable • Adjustable feed speed: 0-20 m/min • Complete set of two lasers • Infeed and outfeed table Lasdpfozqyq Ujx Alyoh • Setworks device for automatic adjustment of cutting parameters