Wood shredder

WEIMA WL4

Condition: like new (used), Year of construction: 2016, operating hours: 1 h, functionality: fully functional, overall weight: 1,300 kg, From year 2016 but has never been in use. As new. The machine has never been used in production. We have only tested it for a short period of time. Data: Dwsdpjz Ix Epjfx Ap Doc Cobkdjz Dg Iqj R Sdkohc Opening: 600X1.050 mm. Rotorlenght: 600 m. V-rotor with 28 reversible knifes. Motor: 18,5 kW. 400V, 50 hz. RPM: pp. 100. Weight: 1300 kg. Lenght/width/height: 2.045X1.165X1.640 mm. Original manual included. WEIMA - Made in Germany. Screen not included. Available in 10/12 mm 15/20 mm 20/25 mm 30/35 mm ect. Ask for quote. Very good for wood, plastic, composite ect. IN STOCK. We ship all over Europe.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available. Dwedpfx Apsxg El Ao Dec

Condition: excellent (used), Weima WL4 wood chipper 18.5 kW engine 600 mm rotor length 28 knives on the rotor, V-rotor Hydraulic infeed hopper Automatic reversing function 20 mm screen Dodpfjz Ip Dcex Ap Dowc Machine with very low operating hours. Used machine, its condition is only slightly different from a new machine. Weight approximately 1300 kg.

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Dodpfx Aez A H Sajp Dowc

Condition: good (used), Code: 0136 Dwjdpfopbvqvsx Ap Doc Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: refurbished (used), functionality: fully functional, overall weight: 1,300 kg, WEIMA WL 4 shredder, 18.5 kW Machine for shredding production waste from wood processing, furniture manufacturing, pallets, CLT, particleboard, rubber, and plastics. Mounted on vibration-damping legs. The machine is in fully working condition and has undergone the following repairs: 1. Bearing replacement on the shaft. Dwjdpfsz En Nrox Ap Doc 2. Complete gearbox service with replacement of 3 sets of bearings. 3. Replacement of the sliding rails of the drawer. 4. New rotor knives. New stationary knives. 5. Replacement of the hydraulic pump. 6. New gearbox and hydraulic oils. 7. New hydraulic hoses. 8. New oil filter. 9. Sandblasting and powder coating of the entire machine. Technical specifications: POWER: 18.5 kW NUMBER OF SHAFTS: 1 SHAFT LENGTH (mm): 600 mm SHAFT DIAMETER (mm): 252 mm ROTATION SPEED: 90 rpm NUMBER OF KNIVES: 14/28 SCREEN SIZE: 15 mm MACHINE DIMENSIONS: 200 x 160 x 120 cm MATERIAL: wood waste FEED OPENING DIMENSIONS (mm): 600 x 800 mm WEIGHT (kg): 1300 kg

Condition: good (used), Shredding machine Djdpfxoz Ea Tpo Ap Dewc Rotor approx. 250 mm Hydraulic slide Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Technical data available upon request.

Year of construction: 2008, condition: excellent (used), Screw pump Dwodpod Rafbjfx Ap Djc Manufacturer: Busch Type: Cobra DS 600 E Condition: very good Delivery time: available from stock

Condition: repair required (used), Year of construction: 1995, functionality: not functional, machine/vehicle number: 950/2507, fuel type: electric, Shredder, requires repair, possibly with a defective shaft. The device must be picked up. Dsdsz Dt Uwspfx Ap Dowc

Condition: good (used), Year of construction: 2010, Engine size : 18,5 Kw Opening : 600 x 1000 mm Number of knives : 28 trapez knives Rotor diameter : Ø 250 mm Rotor length : 600 mm Rotor rpm : 90/min Siewe holes : Ø 15 mm Dwodpfxjz Dn Ufs Ap Doc Dust extraction nozzle : Ø 160 mm Can be examined in working condition, ask for WHATSAPP demo. Mounted with new knives + counter knive Weight : 1300 Kg

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Dwodpfsivpthox Ap Dsc Main motor -22kw

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Dsdpfsz Ai N Rex Ap Dowc Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs Dsdpsw H Rn Eefx Ap Dswc - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Year of construction: 2001, condition: used, • Heating plate size (mm): approx. 1500 x 2700 • Usable area max. (mm): 1250 x 2450 • Loading side (mm): 1500 Dodpfxjkt N Hus Ap Dowc

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Dedpfobtnftox Ap Djwc Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.