Used Grinding Booth, Soundproof Booth for sale (4,419)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Gujdevvkipopfx Al Ajd

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Gujdpjwhqprjfx Al Asd

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Gusdpfx Alswhqplo Ajd

Condition: used, machine/vehicle number: 32396, overall weight: 1,000 kg, total length: 1,820 mm, total width: 1,300 mm, total height: 1,250 mm, Year of construction: 2023, Machine Data Dimensions (W × H × D): 1300 × 1820 × 1250 mm Weight: approx. 1000 kg Drive & Performance Main drive: 15 kW, continuous operation Connection power: 30 kVA Cutting Disc Diameter of cutting disc: up to Ø 508 mm / 20" Cutting disc mounting: Ø 32/40 mm Speed: continuously adjustable 1000–2800 / 1000–2400 min⁻¹ Gsdpfjzilwqjx Al Aoud Processing Data Max. sample size: Ø 190 mm Feed rate: 0.001–50 mm/s Positioning accuracy of the Z-axis: 0.1 mm Axes X-axis (cross-section): 420 mm, automatic Y-axis (cross-section): 280 mm, automatic Z-axis (parallel cut): 200 mm, automatic (optional) Table Data Table size with Z-axis: 550 × 500 mm Table size without Z-axis: 700 × 500 mm T-slot width: 12 mm

Condition: good (used), Machine is in good condition with equipment. Guedpowu Ey Esfx Al Asd

Condition: like new (used), functionality: fully functional, total length: 2,300 mm, total width: 800 mm, total height: 1,000 mm, working height: 900 mm, table length: 2,250 mm, table width: 750 mm, Ulmatec brand extraction table, suitable for grinding and general workshop use. The table is in new condition – it has never been used. The workstation extracts and removes harmful fumes and dust generated during grinding and welding operations. Contaminated air is drawn through the table top to the connection port, where it is filtered by a filtration and ventilation unit or exhausted to the outside using an external fan. Working dimensions of the table: 2.25 m x 0.75 m. Gusdpfx Aozd Rhqol Ajd

Condition: good (used), Year of construction: 1997, Table size/sanding length: 200 x 400 mm Sanding belt dimensions: 200 x approx. 1500 mm Gujdpfx Alezh H Rve Ajd 2 belt speeds via pole-reversing motor: 8/16 m/s Drive motor: 380 V, 1.8/2.2 kW Weight: 145 kg Space required: 1000 x 750 x 1100 mm

Condition: used, Year of construction: 2002, Automatic reamer tool grinding machine – reamer blade grinding machine Type: ARS 2000 Weight: 7,000 kg Year of manufacture: 2002 Guedpfx Aozl D Dhsl Asd - for grinding the chip chamber and chip surface on round reamer tools Gear length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution of the X-axis: 0.001 mm Resolution of the Y-axis: 0.001 mm Resolution of the Z-axis: 0.001 mm Resolution of the W-axis: 0.001 mm Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: Hard disk 20 GB Operating system: Windows 2000 Axis control: 4 axes Simultaneous operation of 2 handwheels

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm Godpfx Aow Rktzol Aoud spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Condition: used, grinding length: 1,850 mm, grinding width: 830 mm, grinding height: 700 mm, table length: 1,700 mm, table width: 500 mm, CNC ECS 2400 GRINDING LENGTH: 1850 MM GRINDING WIDTH: 830 MM GRINDING HEIGHT: 700 MM Gujdpezl Dnmjfx Al Aod TOTAL STROKE: 2000 MM TRANSVERSAL STROKE: 750 MM MOTOR POWER: 14.7 KW GRINDING WHEEL SPEED: 1450 RPM ELECTROMAGNETIC TABLE 500 X 1700 MM COOLING TANK WITH PAPER FILTER WHEEL DIMENSIONS: 450 X 76 X 127 MM OVERALL DIMENSIONS: 6100 X 3240 X 3000 MM WEIGHT: 14,500 KG

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Gsdpfx Alezhdybs Aoud Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Dressing attachment Gjdpegy Ti Djfx Al Aoud MARCELS MASCHINEN CH

Condition: used, Year of construction: 1973, Additional flanges and a spindle for internal grinding are included with the machine. The Jones was completely disassembled and inspected; it works flawlessly. The price is for one machine. Gujdsw Dvwaspfx Al Aod

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine, few operating hours. 3.7 kW motor for high material removal rate, robust design, suitable for continuous commercial use. Guedpfxoziw Afs Al Aod Steel drums with hard rubber coating for perfectly flat, smooth surfaces. Independently adjustable rear drum for controlled material removal. Two-stage feed gearbox for adaptation to different types of wood. Heavy-duty feed table made of gray cast iron, precisely guided by four spindles. Drum hood with double dust extraction connection and guide plates for efficient dust removal. Digital height indicator for quick and safe adjustment to the desired dimension. Abrasive belts with 75 mm and 100 mm width can be used. Technical data Feed motor: 0.18 kW Scope of delivery 80 grit abrasive belt mounted on the drum 100 grit abrasive belt mounted on the drum Height crank, operating manual and spare parts list.

Condition: good (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, HENNINGER ZS 160 centre grinding machine Gujdoyvtmiopfx Al Aed - Centre distance: approx. 800 mm Note: The item must be collected on a binding basis between 12.05. and 22.05.2026, on a date yet to be coordinated. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), Year of construction: 1996, Grinding wheel diameter: 280 mm Grinding wheel width: 30 mm Grinding wheel speed: 2900 rpm Electrical connection: 400 V, 0.9 kW Space required: 600 x 270 x 1100 mm Gujdpszhu Dwjfx Al Aod

Condition: ready for operation (used), functionality: fully functional, grinding length: 800 mm, grinding width: 350 mm, Magnet, 800 x 350 mm. Gedpfx Aozimmmel Asud

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Godpfx Alezimhwj Aoud

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The machine is in good working order. See the video. Gujdpfx Aozimgyel Aed

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm Gedozhma Depfx Al Aeud - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Year of construction: 2009, condition: ready for operation (used), A G+H precision cylindrical grinding center is available. Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, X/Z feed rate: 8m/min, workhead taper: MT4, tailstock quill stroke: approx. 35mm, tailstock taper: MT4, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm, max. speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. grinding wheel diameter: 100mm, filter capacity: 300l, filter flow rate: 100l/min, chuck: three jaw chuck, chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg, operating hours: approx. 350h. Including chuck, magnetic fixture and dressing unit. Documentation vorhanden. An on-site inspection is possible. Gusdjzlt Ntspfx Al Asd

Condition: excellent (used), With DRO With internal grinding attachement Center height 240 mm Distance between centers 2500 mm Grinding wheel 700 x 200 x 305 Grinding wheel speeds 890 / 1'120 rpm Workpiece spindle head 90° rotation Taper in tailstock MK5 Misc. accessories Godpfx Aozhmfyel Ajud MARCELS MASCHINEN AG

Condition: excellent (used), Grinding range 650x450x325mm Table size 600x350mm Magnetic plate 600x400mm Size of grinding wheel diameter x width x bore 400 x 80 x 127 mm Gjdpozhl Rnofx Al Asud Grinding wheel speeds 1400 / 2800 rpm Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; Gjdpoyvlxdsfx Al Ajud FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: TTS10371, Our TT8500 is in very good condition and fully functional. It is equipped with an EPSON manipulator and is very well suited for pre-grinding operations such as with step drills, necking, relief grinding, chamfers, etc. The centerless processing also offers special advantages, especially regarding the concentricity of the tools to be produced. Gedow H Sgujpfx Al Aeud