Used Scm Si 450 E for sale (577)

Condition: used, Year of construction: 2002, used, excellent condition, low hours Manufacturer: SCM Model: SI 450 E Year of manufacture: 2002 CE type-tested Motor: 7.5 kW Steel guides Carriage length approx. 3200 mm Cutting width approx. 1250 mm Max. blade diameter: 450 mm tiltable scoring unit parallelogram safety guard table extension approx. 480 mm electric height adjustment electric tilt adjustment digital display: - height - cutting angle simple mitre gauge dust extraction port D 120 x 100 mm Lsdpfx Asythdcskfehf space requirement approx. 3400 x 2400 x 1500 mm Weight approx. 1100 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Ljdpfxoyftzke Akfehf Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: used, Year of construction: 2008, functionality: fully functional, Main saw blade: Motor power 5.50 kW, 3 speeds: 3000/4000/5000 rpm, maximum diameter 400 mm, bore diameter 30 mm, tilting 0°–45° Lodpfx Akey Ehtpofehf Scoring unit: Motor power 0.75 kW, speed 8500 rpm, diameter 120 mm, bore diameter 20 mm Sliding table dimensions: 3200 x 330 mm Table dimensions (L x W): 1040 x 630 mm Maximum cutting width at rip fence: approx. 1350 mm Maximum cutting length: approx. 3200 mm Maximum cutting height at 0°: 130 mm, maximum cutting height at 45°: 92 mm Automatically controlled functions: Saw blade tilt and height Transport dimensions: 3600 x 1600 x 1700 mm

Condition: used, Year of construction: 2006, functionality: fully functional, power: 75 kW (101.97 HP), cutting width (max.): 1,270 mm, sliding table length: 3,800 mm, CIRCULAR SAW SCM MOD. SI450 N - Carriage mm. 3800 - Cutting width 1270 mm on parallel fence Lhedpfx Asmzbm Rokfsf - Motor 7.5kw - Year 2006 (CE)

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: AB141760, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Lodpfx Akjtwp Epofshf Scoring unit manual adjustment electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm

Condition: used, Year of construction: 2005, Carriage length: 3200 mm Cutting width at the width stop: 1300 mm Ljdpfx Ajuix Egskfjhf Cutting width at the cross-cut fence: 3200 mm Cutting depth: 150 mm Scorer: Yes Saw blade height adjustment: electric / position control Swivel adjustment saw blade: electric / position control Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: Digital Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 450mm Speeds: 3 Motor power: 7.5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3500mm Machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Lsdpfxexavrgj Akfshf Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide Lodpfx Aocrnm Nekfjhf start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Lsdpfeytufgjx Akfohf Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. Lhodpfx Akeyabkvsfjf • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German Ledpfx Aox Enrxskfehf 930731 Voltage: 400V EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Condition: new, Year of construction: 2024, functionality: fully functional, Powerful and versatile panel saw packed with extra features Sliding table with 10-year warranty! - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for fast, precise positioning for angle cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay - Overhead saw guard with integrated dust extraction Ø 80 mm - Automatic brake on the main blade - Lockable main switch for the control circuit (110 V) - Manual right-hand side guide with position reading via metric scale, running on Ø 40 mm steel tube, and with micrometric adjustment. - Cutting capacity against parallel fence 1270 mm. Direct start of main motor - Three speeds for main blade - Scoring unit with independent motor and external setup and stop for quick repositioning of the scoring blade. The machine is compliant with CE standards. Lhedpjyglr Defx Akfef Additional features: - CompeX for angle cuts, integrated into the extension table, for quick conversion to angled cutting - Start/Stop switch on the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: new, Year of construction: 2024, functionality: fully functional, SCM Panel Saw, SI 400 EP NOVA with tilting blade and sliding table - “READY” electronic control with 2 controlled axes Specification: - Lifting and tilting of the saw unit - Automatic height adjustment according to tilt angle - Manual, semi-automatic, and automatic with memory - Up to 99 programs - Calculator and hour meter - Tool data setting Optional equipment: - CompeX for mitre cuts, integrated in the sliding table for quick changeover to mitre cuts - Start/Stop switch at the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops Lhjdpsygll Rsfx Akfjf - 3rd LCD stop for crosscut fence

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Ljdpfx Aksvxr Sksfehf

Condition: excellent (used), Catalogue number: 7776 TECHNICAL DATA - Shaft width: 520 mm - 4-knife cutter block - Noise-reducing comb - Shaft guard - Table length: 3010 mm - Longer, electrically adjustable infeed table: 1770 mm - Cast-iron tables - Both tables adjustable - Original cast-iron fence, angle adjustable - Electric brake Lhedpfx Asyi Twmekfof - Extractor connection diameter: 120 mm - Motor: 4 kW - Dimensions (L/W/H): 3010x1000x1400 mm - Weight: 870 kg ADVANTAGES - Italian production - 4-knife cutter block - Overhead control panel - Electric brake - Noise-reducing comb - Longer infeed table - Not repainted - Used surface planer, very good condition, original DTR documentation, CE Net price: 28,900 PLN Net price: 6,880 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2001, Min./Max. working width (finished size): 23 - 180 mm Min./Max. working height (finished size): 6 - 105 mm Min. workpiece length: 300 mm Feed speed: 6 - 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindle: 10 kW Motor power, vertical spindle: 7.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Extraction port diameter 1 pc: 150 mm Extraction port diameter 2 pcs: 120 mm Weight: approx. 950 kg Storage location: Supplier Lhedpfx Akoym D Eisfof

Condition: used, total width: 1,000 mm, total height: 1,600 mm, Empty weight: 1.300 kg Dimensions (LxBxH): 340 x 100 x 160 cm Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Spindle left/right 7.5kW Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - Min. planing height [mm]: 100 - Feed table length [mm]: 2300 - Feed roller diameter [mm]: 120 - Feed motor [kW]: 7.5 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1000mm x 1600mm (l x w x h) Lhsdpfx Akeyw Sg Djfof - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Working width: 180 mm Working height: 110 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power (bottom & top spindle): 7.5 kW Motor power (right & left spindle): 7.5 kW Adjustment (bottom spindle): - Adjustment (right spindle): - Adjustment (left spindle): handwheel Adjustment (top spindle): handwheel Planer heads (bottom & top): Centrolock Planer heads (left & right): Centrolock combined with profiling capability Feed speed: 2 Feed roller pressure: spring Current consumption: 32.8 A Extraction connection: Machine length: Machine width: Lhsdpeyq R Aiofx Akfjf Weight:

Condition: excellent (used), Year of construction: 2001, Trolley length 3200mm Electric saw angle adjustment Electric saw lift Lodpfelcfhtex Akfshf Cutting width on the right 1700mm Main motor power 7.5kw Scoring motor power 0.75 kw Saw size max/min: 400/300mm CE Year 2001

Condition: excellent (used), Panel saw SCM Si400e 9/24 Technical specifications: Carriage length: 3200 mm Electrically adjustable blade angle Electrically operated blade lifting Electric adjustment of right-side rip fence Cutting width right: 1270 mm Maximum cutting height: 130 mm Blade speed variable via belt Scoring unit speed: 6500 rpm Ljdpsw Rkz Sefx Akfshf Blade guard Emergency stop Main motor power: 5.5 kW Scoring unit motor power: 0.75 kW Overall dimensions: Height: 1400 mm Width: 4300 mm Length: 3550 mm

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Lsdpfx Akew Hbf Ijfohf Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum length of workpiece: 300 mm Spindle diameter: 35 mm Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm Ljdpjcnxayjfx Akfjhf min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron Lhsdpfjcnwydjx Akfof 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), SCM Sintex four-sided planer. Lhodpfx Aex E R Hxjkfjf

Condition: good (used), functionality: fully functional, Manual control units with 20 meters cable length Ljdoxg Rn Nspfx Akfjhf