Used Haffner Sizing Saw for sale (24,705)

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Kjdpfx Asz Suv Heniodu Very good condition. Available immediately.

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 350 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 1,820 mm, total length: 1,850 mm, total width: 2,300 mm, overall weight: 1,900 kg, table height: 800 mm, section length (min.): 10 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the HBE321A Dynamic bandsaw automat Band guide parts made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This noticeably increases the service life of the saw blades. Servo feed system The saw feed is controlled by a ball screw and a servo motor. This results in significantly shorter cycle times and more precise saw feeds. Your advantage: higher cutting performance and longer band service life! Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Auto-Feed-Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed and cutting speed. Electrically powered chip brush with a Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Kedpfoz Rwitex Anijdu Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the metal bandsaw to the changing material cross-sections. Due to its arrangement directly at the back of the saw blade, the system regulates quickly and precisely. Automatic guide arm adjustment This ensures that the metal bandsaw provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Energy-efficient The use of modern drives and a special hydraulic system reduces energy consumption by approx. 30% compared to the previous model. Easy to operate Quick and easy operation of all functions of the metal bandsaw via touch control. Double clamping device offers process reliability, especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the metal bandsaw and fix both the raw material and the sections that have just been cut.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84 kW Multi-blade saw Dimensions Length: 3440 mm Width: 1900 mm Height: 1700 mm Cutting parameters Maximum diameter of logs to be sawn: 450 mm Diameter of circular saw: 630 mm Minimum width of the center stack: 60 mm Maximum number of saws per spindle: 4 2 spindles, one on top, one on the bottom Motors Power of the motor for the lower drive: 52 kW Kdodpfjz H T Ayox Aniju Power of the motor for the upper drive: 41 kW Spindle speed: 1480 rpm Infinitely variable feed speed: 0–15 m/min (0–25*) Power of the motor for the feed drive: 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length The multi-blade saw is immediately available and ready for use. Loading onto the truck will, of course, be handled by us.

Condition: excellent (used), Year of construction: 2020, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, Sliding table saw Robland Z400-EL. A robust, professional machine for precision cross-cutting and ripping of wood panels and solid wood. Ideally suited for carpentry, furniture making, and workshop use. Specifications and features: Ksdpez R Nuiofx Aniodu * Electric height and tilt adjustment of the saw blade with digital readout * Sliding table length: 3,200 mm * Saw blade capacity up to 400 mm * Cutting height up to 125 mm at 90° * Variable speeds for different blade diameters * Scoring unit * Digital readout for rip fence position * 10 hp motor, separate scoring unit In perfect working order. Transport across Europe can be arranged at a good price.

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Kodpfx Aovvkbleniodu Storage location: Nattheim

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Kdodozryuvspfx Anieu - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: used, The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Kedpfxszryuij Aniodu - Motor: 0.55 kW / 220 V - Cutting height: approx. 50 mm - Cutting depth: approx. 80 mm

Condition: used, Year of construction: 2011, Cutting length: 4300 mm Vertical cutting height: 2240 mm Horizontal cutting height: 2100 mm Kdjdpfx Anszxqffoiju Cutting depth: 80 mm Saw motor: 5.5 kW Saw blade diameter: 300 mm Speed: 4750 rpm Dust extraction port diameter: 1x 160 mm Dimensions: 5535 x 1500 x 2901 mm Weight: approx. 900 kg Storage location: Nattheim

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401511001, functionality: fully functional, operating hours: 25 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT X-CNC-M | CNC | MIRROR VERSION | SAVE 44% EXCLUSIVE CNC DEMONSTRATION MACHINE – LEFT-HAND MATERIAL FEED – DIRECTLY FROM THE MANUFACTURER! We are selling a fully automatic two-column bandsaw, PEGAS-GONDA 540 HORIZONT X-CNC-M, directly from our showroom. M = MIRROR (MIRROR VERSION) This special version of the 540 HORIZONT X-CNC features a mirrored material feed: the material is fed from the LEFT instead of the usual right side. The perfect solution for production halls where the spatial conditions do not allow for material feed from the right! The machine offers complete CNC control for angular positioning, material feed, and sawing process. Demonstration machine, not used in regular production. Sale due to the renewal of our showroom equipment. SPECIAL PRICE – 44% SAVING! List price: 105,299 EUR Our price: 59,000 EUR plus VAT. You save 46,299 EUR! TECHNICAL DATA Model: 540 HORIZONT X-CNC-M (MIRROR) Fully automatic CNC two-column bandsaw Material feed from the LEFT CNC-controlled angle adjustment: ±45° Round cut at 90°: 540 mm Rectangular cut at 90°: 750 × 490 mm Saw band: 6880 × 41 × 1.3 mm Band speed: 15–150 m/min Main motor: 5.5 kW Weight: approx. 3,875 kg SIEMENS SIMATIC S7-1500 PLC SIEMENS TP700 Comfort Touchscreen CNC-controlled material feed Feed stroke: 2,000 mm Multiple feed: up to 19,999 mm Servo-controlled saw feed Automatic cut adjustment (ASR) Up to 100 cut programs 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer only bears the travel and transportation costs. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Kjdpfo Aa Dmvjx Anijdu Price: 59,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport to the customer, commissioning, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES A wide range of original accessories are available (see accessory price list). We recommend matching PEGAS-GONDA roller conveyors for the left-hand material feed. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: Special MIRROR version with left-hand material feed Fully automatic CNC operation Directly from the manufacturer 46,299 EUR price advantage 6 months warranty Original manufacturer service Immediately available Contact us for a viewing or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: used, total length: 1,850 mm, total width: 1,050 mm, total height: 1,400 mm, Colour: Grey Weight: 500 kg Pulp saw Harwi 130 45 degrees  5,5kW Kedpfozrm S Iex Aniedu - Documentation available: No - CE certificate present: No - Serial number: 130 S - Main motor power [kW]: 5.5 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 400 - Max. saw blade diameter [mm]: 450 - Table length [mm]: 1500 - Table width [mm]: 1050 - Min. adjustable angle [°]: 0 - Max. adjustable angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Power [kW]: 7.3 - Transport dimensions: 1850mm x 1050mm x 1400mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Year of manufacture: 2012 Colour: Grey Weight: 1.500 kg - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 Kdsdpfsyna Ezex Anieu - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, total height: 1,850 mm, overall weight: 250 kg, Equipment: motor brake, Band saw PANHANS, max. cutting width 400mm, including several saw blades. Kdedpsz Tfcmjfx Anisu

Condition: good (used), Year of construction: 2007, functionality: fully functional, Used, well-maintained, fully automatic bandsaw machine "JAESPA", model: Comfort 260A Cutting range for round/square/rectangular materials: 260/260/320 x 200 mm Band speed: 15-100 m/min, continuously adjustable via frequency inverter Band dimensions: 3660 x 27 x 0.9 mm Kdodpfxoz Tdk As Anieu Technical data and dimensions: Subject to change.

Condition: good (used), Year of construction: 2006, functionality: fully functional, A used, well-maintained cold cut saw "TRENNJAEGER", model: TUS 470. The machine is suitable for burr-free cold cutting of profiles, plates, square and round materials in straight and miter cuts. Can be swiveled on both sides from 90 degrees to 45 degrees to 30 degrees, with a digital angle display. - Cutting range with saw blade diameter 450 mm, 90° round/square/rectangular 140/110/290x40 mm - Cutting range with saw blade diameter 450 mm, 45° round/square/rectangular 140/110/190x40 mm - Cutting range with saw blade diameter 450 mm, 90° round/square/rectangular 130/110/130x40 mm - Maximum clamping range of the machine: 290 x 150 mm Kodpfx Aoz Tdk Neniodu - Working height: 900 mm The machine is equipped with an infeed roller conveyor and an outfeed roller conveyor with a length stop. Technical data and dimensions: Subject to change.

Condition: repair required (used), Year of construction: 1996, power: 5.5 kW (7.48 HP), Equipment: scorer, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 1996 Sliding table length: 2,800 mm Cutting width: approx. 1,013 mm Saw blade diameter max.: 350 mm Power: 5.5 kW Cutting width adjustment: Electric Height and angle adjustment: Electric Ksdpfxoz Urzlj Aniedu Scoring saw: Yes, 2-axis adjustment Motor brake: Yes

Condition: used, Year of construction: 2023, Circular saw Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Cutting height: max. 204 mm Saw blade diameter: max. 550 mm Kodpfx Anjz U Hh Tjiodu Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric The machine table has some surface rust.

Year of construction: 1994, condition: used, functionality: unexamined, We are selling a used, traditional bridge saw, type Zambon Rover 35, manufactured and installed in 1994. The machine is in excellent, freshly renovated condition, both mechanically and visually. The bridge consists of solid, heavy-duty cast iron and is mounted on two concrete support walls on sliding rails. The total weight of the machine with table is 5800 kg. Further technical data: saw blade motor 18.5 kW / 380V / 50Hz, two speeds 1460/2930 through belt drive, pivoting support 0-90° for miter cuts, carriage with 300 mm electric height adjustment, blade diameter 350 - max 800 mm, which allows a cutting depth of 18.5 cm, cutting length 3500 mm, bridge travel 4700 mm. The machine is programmed and operated via the pivoting and hydraulically vertically adjustable control panel and the switches installed in it, and via the 2-axis control system EM760.55. Up to 99 cutting widths can be programmed with repetition, a granite lowering automatic can be set, and there is a profile program. However, the machine can also be operated in manual mode without the automatic function. The feed of the carriage and the bridge is done by hydraulic drive, the bridge travel by handwheel with scale. We have all the documents for the machine, from the purchase to the operating instructions, as well as complete records of repairs and accessories, and the complete foundation plans. The machine includes a heavy-duty cast iron table 3500x200 mm, load-bearing up to 5 tons, with tiltable support frames with wooden cladding. The table can be rotated by hand and fixed at 90° and 45°, and can also be hydraulically raised by 500 mm. Kdedpfx Ane Aarlyoiou The problem: 1) The machine has an electrical defect, which means that the carriage cannot be moved at the moment. The cause, which should not be major, must be found by the buyer. 2) The table is anchored to the ground with a cylinder up to about 2 m. This can be lifted out, but it will not stand on its own because of the tall cylinder. It is questionable whether the counterpart in the ground can still be removed. For this reason, and because of the costly effort involved in creating the foundation for the table, we recommend installing a different table. Terms of sale: The stated price is therefore only for the machine and does not include the table, but the table can be taken away free of charge. The machine is still assembled and can be inspected by arrangement, but cannot be demonstrated due to the described defect. The sale is ex works, and the buyer is responsible for organizing the disassembly and transport. Assistance can be provided during disassembly, and a crane is available for disassembly and loading.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Miter saw, complete with machine stand, manual stop, 3 m infeed roller conveyor RLK, and 2 m outfeed roller conveyor RO. Kdjdpfx Ao Aax Aleniou

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 8 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 360 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,940 mm, overall weight: 1,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, PEGAS-GONDA 360x500 A-CNC-R | CNC AUTOMATED MACHINE | 33% SAVING AUTOMATIC MITER BANDSAW – DIRECTLY FROM THE MANUFACTURER! We are selling an automatic bandsaw PEGAS-GONDA 360x500 A-CNC-R directly from our showroom. The machine is designed for economical, automatic sawing of profiles, tubes, and solid materials. Automatic material feed and programmable control enable efficient series production. Demonstration machine from our showroom. For sale due to the replacement of our exhibition machines. SPECIAL PRICE – 33.3% SAVING! - New price: 34,398 EUR - Our price: 22,950 EUR plus VAT - You save 11,448 EUR! TECHNICAL DATA - Automatic hydraulic bandsaw - Cutting range 90°: round 360 mm - Rectangle 90°: 500 × 360 mm - Cutting range 45°: round 360 mm - Rectangle 45°: 440 × 240 mm - Cutting range 60°: round 300 mm - Rectangle 60°: 290 × 280 mm - Automatic miter cuts up to 45° right - Semi-automatic miter cuts up to 60° right - Saw band: 4780 × 34 × 1.1 mm - Band speed: 20–100 m/min - Main motor: 3.0 kW - Weight: approx. 1,500 kg - MITSUBISHI FX5U PLC control - MITSUBISHI GT2104 color touchscreen - Automatic hydraulic material feed - Hydraulic material clamping - Programmable quantities and cutting lengths 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer will bear the travel and transport costs of the technician. Service rates: - Travel costs: 1 EUR/km (round trip) - Travel time: 25 EUR/hour - Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 22,950 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Available immediately! We offer transport, commissioning, and operator training for an additional fee at our service rates. ORIGINAL ACCESSORIES A wide range of PEGAS-GONDA original accessories is available (see accessories price list). We particularly recommend matching roller conveyors for efficient material handling. We will gladly prepare a quotation for a complete sawing station. YOUR ADVANTAGES: - Automatic material feed - Miter cuts up to 60° - MITSUBISHI PLC control - Directly from the manufacturer - 11,448 EUR price advantage - 6 months warranty Kedpfx Ans Aa Drxjiedu - Original manufacturer service - Available immediately Contact us for more information or to arrange a visit! PEGAS-GONDA – directly from the manufacturer.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 10 h, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 280 mm, control type: PLC-controlled, roller diameter: 260 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 100 rpm, total height: 1,780 mm, total length: 1,900 mm, total width: 1,050 mm, overall weight: 420 kg, table height: 795 mm, year of last overhaul: 2026, saw band length: 2,970 mm, saw blade speed: 100 rpm, saw blade width: 27 mm, number of digital displays: 1, Equipment: CE marking, cooling unit, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 260×280 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale Kdsdpfxszhm Eas Aniju ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 255 mm Maximum cutting capacity (rectangular): 280 × 250 mm Continuously adjustable mitre cutting: 60° right to 45° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Motor power: 1.5 kW Saw blade dimensions: 2720 × 27 × 0.9 mm Hydraulic material clamping vice Hydraulic saw head feed and return Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 420 kg Built for Daily Industrial Use The PEGAS 260×280 SHI-LR is a semi-automatic band saw designed for both single-piece and small-batch production. The machine is suitable for straight and mitre cutting of structural steel, stainless steel, tool steel, solid bars and profiles. Angle cutting is continuously adjustable from 60° to the right and 45° to the left. All major load-bearing components are manufactured from high-quality cast iron, providing exceptional rigidity, vibration damping, high cutting accuracy and a long service life. The saw head is inclined at 25°, reducing blade wear and extending blade life. The hydraulic semi-automatic cycle controls material clamping, cutting, saw head return and vice opening, while material loading is performed manually. Feed pressure and cutting feed rate are easily adjustable for optimum cutting performance. Inspection and Test Run The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Ksdsyr Dfaopfx Anisdu Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: excellent (used), Full automatic Kedoy H Dmnspfx Aniodu Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 1999, Used Machine Year of manufacture: 1999 Features and Technical Specifications: - Usable cutting length: 4200 mm - Usable cutting width: 3200 mm - Saw blade overhang: 70 mm - Max. cutting height: 60 mm - Main spindle motor power: 7.5 kW - Main saw blade diameter: 280 mm Kedpfxezy Dz No Anisdu - Scoring saw motor power: 1.1 kW - Scoring saw blade diameter: 125 mm - Saw carriage feed speed (forward): 0–40 m/min - Saw carriage return feed speed: 40 m/min - Saw blade change: with key - One continuous pressure beam - Control system: Euroline 1 - 99 programs - Panel cutting from the front - Final panel cut - Cutting with sensor - Air-cushion support tables: 4 - Exhaust ports: 140 mm at the bottom (required vacuum pressure: 800 Pa) - Exhaust ports on the pressure beam: 2 x 100 mm (required negative pressure: 830 Pa per exhaust port) - Air velocity: 20 m/s

Condition: good (used), Code: 0475 Brand: STRIEBIG - SWITZERLAND Model: AUTOMAT TRK 6220 AV Automatic vertical panel saw with scoring unit for precise cutting of wood panels, custom furniture, kitchens, bathroom furniture, doors, window frames, plastics, composite materials and various Technical data: Cutting length mm 5300 Cutting height mm 2200 Cutting depth mm 80 Blade diameter mm 300 F30 Kdjdpezqu Tkjfx Aniju Speed rpm 4750 Motor power Kw 5,5 Scoring unit Support rollers on the table to facilitate panel handling Automatic vertical movement with speed regulator Automatic horizontal movement with speed regulator Intermediate support for small panels Suction mouth diameter mm 100 Overall dimensions of mounted machine : mm 6760 x 1800 x 3015 h Weight kg 1050 Overall dimensions for transport : Machine mm 6760 x 1800 x 2650 h - kg 450 - Beam mm 3000 x 1000 x 1000 h - kg 600

Condition: excellent (used), Catalog number: 7885 TECHNICAL DATA - Max. main blade diameter: 400mm - Max. cutting height: 120mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30mm - Cutting length on the carriage: 1400mm - Cutting width with guide: 1300mm - With a sliding carriage - Guide on the sliding carriage adjustable at an angle - Main blade motor power: 4kW - 2 types of rotational speeds: 3000/4500 rpm - Table dimensions: 1120x1020mm - Table dimensions with extension: 1630x1730mm - Diameter of the dust extraction port: 80mm, 140mm - Dimensions (L/W/H): 3300x2180x1450mm – weight: 1040kg ADVANTAGES – Made in Poland – DTR documentation available – Used saw - Very good condition Net price: 9900 PLN Net price: 2302 EUR, depending on the exchange rate of 4.30 EUR Ksdpfx Aoztavijniedu (Prices may vary due to significant fluctuations)