EMMEGI cross-cut and mitre circular saw

EMMEGI

Condition: excellent (used), Year of construction: 2013, EMMEGI DIAMANT XL 7700 – CNC Profile Machining Center – 4 Axes – Year of Construction 2013 Manufacturer: EMMEGI S.p.A., Italy Model: DIAMANT XL 7700 Machine Type: CNC Profile Machining Center Year of Construction: 2013 Serial Number: C114811 Control System: CNC control system with 15-inch TFT color display Number of Axes: 4 CNC-controlled axes Technical Data Travel Distances and Axes * Number of CNC-controlled axes: 4 * Travel distance X-axis (longitudinal): 6,500 mm * Travel distance Y-axis (transverse): 1,095 mm * Travel distance Z-axis (vertical): 800 mm * Swivel range A-axis: 0° to 180°, continuous * Rapid traverse rate X-axis: 80 m/min * Rapid traverse rate Y and Z axes: 64 m/min * Rapid traverse rate A-axis: 10,000 °/min * Positioning accuracy over 1,000 mm: ±0.15 mm Milling Spindle and Tool Holder * Main spindle power S1: 7.5 kW * Maximum spindle speed: 20,000 rpm (HSK F63) * Up to 24,000 rpm with ISO 30 according to technical documentation * Tool holder: HSK F63 / ISO 30 depending on configuration * Tool magazine: 9 positions with HSK F63 or 10 positions with ISO 30 * Tool change time: under 16 seconds (HSK F63), under 18 seconds (ISO 30) Tool Dimensions * Maximum milling/drilling tool diameter: 63 mm * Maximum tool length: 168 mm * Disc milling cutter HSK F63: up to Ø 250 mm * Disc milling cutter ISO 30: up to Ø 180 mm Clamping System and Work Areas * 2 independent work areas on the X-axis * 6 clamping devices as standard * Optionally up to 12 clamping devices * Automatic positioning of the clamping devices * 2 stops in standard design * Optionally up to 4 stops CNC Control and Software according to technical documentation * CNC configuration: Pentium 3, 1 GHz, 256 MB RAM * Display: 15-inch TFT color display * Keyboard * 2 COM interfaces * 2 USB interfaces * Network interface * Operating system according to documentation: Windows 2000 Professional * Software: CAM, Editor, Drill * CAMPUS software included according to documentation Electrical and General Data Bwjdpfx Adj Af U Aijgew * Year of construction: 2013 * Voltage according to nameplate: 400 V, 3 phases, 50 Hz * Connected power according to nameplate: 25 kW * Rated current according to nameplate: 36 A * Weight according to nameplate: approx. 7,000 kg * Operating pressure, compressed air: 6 bar * Air consumption per cycle: 165 l/min Equipment Visible in the machine photos: * CNC control panel with screen and keyboard * Separate hand-held operating unit * Automatic clamping system with multiple profile clamps * Enclosed machining area with protective cladding * Long bed for profile machining * Emergency stop switch * Pneumatic connections

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 7,000 mm Travel range, Y-axis: 300 mm Travel range, Z-axis: 350 mm Spindle speed: 18,000 rpm Tool holder: ISO 30 Bods Ahmznepfx Adgoww Tool positions: 2 magazines with 5 + 1 tool positions each Maximum profile length: 7,000 mm MACHINE DETAILS Control system: CNC control, 3 axes Spindle power: 5.5 kW Operating pressure: 6–8 bar Machining capabilities: Five-sided machining with angled heads Number of clamping systems: 8 pieces Machine weight: approx. 3,200 kg EQUIPMENT Automatic clamping jaw positioning Dual-zone machining / pendulum operation Two tool magazines for both work areas Sawing, drilling, and milling in a single clamping operation Angled heads for five-sided machining Ideal for: Manufacturing of aluminum windows and doors, processing of lightweight metal profiles, manufacturing of PVC profiles, batch and series production, industrial production of long profiles.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 7,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, Classic Magic 500 TU6 -Double miter saw with program/positioning control -Electrically adjustable saw head, speed V = 20 m/min. -Saw blade diameter 500 mm -Saw blade bore 32 mm Bodpfez Adxtex Adgjww -Max. cutting length 6,200 mm, automatically up to 10,000 mm in oversized cutting mode -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the saw head -Miter angle range from 90° to 22.5° (outward) -Saw heads with automatically controlled full protective guards -Profile support roller conveyor (right) -Pneumatic material/workpiece clamping The machine includes the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Long roller conveyor -Additional tensioner on the roller conveyor -Horizontal + Vertical clamps -Macro function (ideal for mosquito screen manufacturers) -Oversized cutting -Shortcut -Crosscut -Automatic cut

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 6,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, The machine is currently undergoing refurbishment; further photos will follow. Classic Magic 500 TU5 -Double miter saw with program/positioning control -Electrically adjustable saw head, speed V = 20 m/min -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 5,200 mm; automatic extension up to 10,000 mm possible for oversized parts -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the saw heads -Miter angle range from 90° to 22.5° (outward) -Saw heads with automatically controlled full protective guards -Profile support roller track (right) -Pneumatic material/workpiece clamping The machine comes with the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Long roller track Bwjdpfj Afbtwex Adgow -Additional tensioner on the roller track -Horizontal + Vertical tensioners -Macro function (ideal for mosquito screen manufacturers) -Oversized part cutting -Shortcut function -Cross-cutting -Automatic cutting -Automatically extending profile support

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 3,560 h, overall weight: 1,850 kg, Phantomatic T 3 Star >The machine is currently undergoing refurbishment; further photos will follow.< Bwodpfx Aj Afbrtodgsw The machine has the following options: > Software CamPlus / Job > Remote control MG Pilot > 8-tool automatic tool changer > Automatic clamp positioning > Enclosed housing > 2 barriers (for multi-piece machining and overlength machining) > 4-sided machining

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The machine is currently undergoing refurbishment; updated photos will be provided. Cutting length: 5000 mm with 2 saw blades operating simultaneously (for extra-long cuts up to 10 meters). Windows 10 PC New saw motors Pneumatics largely new or refurbished With uninterruptible power supply Additional tensioner on the roller conveyor Swiveling material support Automatically positionable via a DC motor, movable saw unit on hardened linear guide rails Travel speed approx. 20 m/min. Bsdpfxe Afbrge Adgsww Minimum section length 335 mm (5 mm) Maximum cutting length 5350 mm (9000 mm) Saw blade drive: 2 x 3 kW, 400 V, saw blade speed 2650 rpm Automatic electronic miter adjustment as standard up to 22.5° outwards and 45° inwards via servo motors External and internal dimension cutting Robust construction and proven workmanship guarantee the highest dimensional accuracy. Extremely stable welded construction with chip collection drawers in the machine bed Particularly large cutting area due to 550 mm saw blades Hydropneumatic saw blade feed Clamping devices, horizontally pneumatic, 1 each on the left and right of the saw blade Roller conveyor, 1.5 m long, with additional material support at the end of the frame LUBETOOL timed spray device Pneumatic saw blade guard Operation via two-hand control according to BG regulations Suction nozzle for connecting a chip extraction system Includes 2 carbide circular saw blades, 550 mm Optionally also available with an integrated extraction system!

Condition: used, The EMMEGI PHANTOMATIC T4 A is a 3-axis CNC machining centre, manufactured in 2005, designed for milling, drilling, slotting and tapping operations on aluminium, PVC and light alloy profiles. The machine is equipped with a 3-axis CNC control system (X, Y, Z), a high-speed electrospindle and an automatic tool magazine with 5 + 1 positions, allowing automatic tool changes during the machining cycle. It also features a dual-output angle head for horizontal and lateral machining operations, providing greater flexibility when processing profiles. The worktable is equipped with 4 automatically positioned pneumatic clamps for secure clamping and accurate positioning of the profiles. Bsdpfxj Agv A Re Adgeww Main Technical Specifications CNC control: 3 controlled axes (X, Y, Z) Tool magazine: Automatic Angle head: Dual-output angle head for horizontal machining operations Pneumatic clamps: 4 Clamp positioning: Automatic Installed power: 7.5 kW Power supply: 400 V, three-phase, 50 Hz Machine weight: 1,950 kg Year of manufacture: 2005 CE marking: Present

Year of construction: 2007, condition: good (used), useful lenght 5000mm Bsdpfx Ado Afn Rijgeww blades 500 mm

Condition: used, EMMEGI PHANTOMATIC M4L 4-axis CNC machining centre, manufactured in 2022, designed for machining aluminium, PVC and light alloy profiles. The machine is equipped with a high-speed electrospindle featuring an HSK-F50 tool holder, automatic A-axis rotation and a double tool magazine, making it ideal for milling, drilling, slotting, end milling and machining operations on multiple sides of the profile. MACHINE DETAILS Manufacturer: EMMEGI S.p.A. – Italy Model: PHANTOMATIC M4L Year of manufacture: 2022 Machine type: 4-axis CNC machining centre Certification: CE with original Declaration of Conformity Bsdj Afnl Tjpfx Adgjww TECHNICAL SPECIFICATIONS Axis Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 274 mm Z-axis (vertical): 390 mm A-axis: automatic rotation from 0° to 180° Positioning Speeds X-axis: 56 m/min Y-axis: 22 m/min Z-axis: 22 m/min X/Y/Z axis acceleration: 3.3 m/s² Electrospindle Power: 4 kW (S1 continuous duty) Maximum speed: 20,000 rpm Tool holder interface: HSK-F50 Liquid cooling system Automatic A-axis rotation: 0°–180° A-axis rotation speed: 6,600°/min Machining Capacity X-axis longitudinal travel: 3,000 mm Usable working length with tool magazine: up to 2,815 mm, depending on configuration Extended-length machining capability: up to 5,630 mm, depending on machine configuration and operating conditions Multi-side profile machining capability MAIN FEATURES AND EQUIPMENT Double tool magazine Electrospindle with HSK-F50 tool holder interface CNC control system with operator monitor and keyboard Automatic A-axis rotation Pneumatic clamps for profile positioning and securing Fully enclosed safety guarding Pneumatic clamping system Technical documentation and operating manual Original CE Declaration of Conformity APPROXIMATE OVERALL DIMENSIONS Length: 3,707 mm Depth: 2,139 mm Height: 2,482 mm AVAILABILITY MACHINE AVAILABLE FROM JANUARY 2027

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Bwsdpfx Asw Hk T Usdgow