Used Hdd, Drilling Rig, Directional Pressing Plant for sale (24,469)

Condition: good (used), Year of construction: 1980, filter area: 98 m², pressure: 15 bar, cake thickness: 25 mm, Plant: used mobile chamber filter press / filter press Manufacturer: Filox 800 x 800 Year of construction: 1980 Plate size: 800 x 800 mm Effective length: 5200 mm Number of chambers: 88 pieces Cake thickness: 25 mm Filter pressure: 15 bar Nlodpfjqa Dtqjx Ab Usg Closing pressure: Min. 300 bar, max. 320 bar Total filter area: approx. 98 square meters Total cake volume: approx. 1100 liters Motor voltage: 380 V, 50 Hz Protection class: IP 44 Plate material: PP Drain: open Operating side: left Cloths: Optional

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: Nljdpfeq Nyuvox Ab Usg - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: Meter reading - Borehole diameter: max. 385 mm - Maximum torque: 2500 kN - Tensile force: 96 kN Nljdohd I S Uspfx Ab Uog - Compressive force: 65 kN - Max. drilling length: 250 m - Power: 90 kW - Drilling rods and bits included - Complete equipment with separate motor, hydraulic unit and tank for drilling fluid - Motor: Perkins 119 kW / 162 hp This offer is subject to change; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase agreement are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC). These can be accessed at any time on our website or can be requested from us. The place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Further information: Intended use: Construction

Condition: new, Year of construction: 2026, CORMAK Z5020 Vario 230V Column Drill Press The CORMAK Z5020 Vario 230V column drill press is a modern metal drilling machine designed for professional workshop and industrial applications. Thanks to its stepless speed adjustment, wide machining capabilities, and rigid construction, it is perfectly suited for demanding drilling operations. Main advantages of the machine Stepless spindle speed adjustment from 180–2000 rpm – allows precise adaptation of drilling parameters to the type of material being processed. Solid 80 mm diameter column – high rigidity ensures stability during drilling operations. Tilting worktable from -45° to +45° – increases flexibility when machining workpieces at an angle. Drilling depth stop with scale – ensures repeatable and accurate hole depths. Built-in LED lamp – improves visibility of the working area. T-slots in the table and base – enable secure mounting of machine vices and fixtures. Construction and technology The CORMAK Z5020 Vario column drill press is manufactured using durable cast iron components, significantly increasing its service life and resistance to vibrations. The spindle with an MK3 taper and 150 mm stroke enables deep-hole drilling. The belt-driven transmission ensures reliable and quiet operation. The adjustable worktable, together with 600 mm height adjustment range, allows machining of workpieces with various dimensions. Precision and work efficiency The 1100 W motor (230 V / 50 Hz) combined with stepless spindle speed control enables efficient machining of a wide range of metal materials. Precise feed control and ergonomic operation ensure operator comfort even during extended working periods. With a maximum drilling capacity of 25 mm, the machine is a highly versatile solution for many applications. Applications The Z5020 Vario 230V metal column drill press is ideal for: locksmith workshops, manufacturing plants, maintenance departments, technical schools and training centers. Standard equipment LED work light Drilling depth stop Tilting worktable with T-slots Base with T-slots Stepless spindle speed adjustment Technical specifications Parameter Value Maximum drilling diameter 25 mm Nlodpfx Ajwnca Ajb Ueg Maximum chuck capacity 16 mm Spindle axis to column distance 215 mm Spindle taper MK3 Spindle stroke 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gear transmission Yes Base dimensions 580 × 415 mm Table dimensions 356 × 356 mm Overall height 1710 mm Spindle speed range 180–2000 rpm Table height adjustment range 600 mm Transport dimensions 1510 × 690 × 256 mm Weight 95 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, GÜNTHER GTP 600 MC2 | Combined roller steak tenderizer and meat press (strip tenderizer) Manufacturer: Günther Maschinenbau GmbH Model / Type: GTP 600 MC2 Serial number: 34477 Nsdpfjzu Axcox Ab Ujlg Year of manufacture: 2015 Power supply: 400 V / 50 Hz / 16 A Power: 4.5 kW Overall dimensions: 2250 x 2050 x 2050 mm Working width: 570 mm Belt width: 595 mm (plastic) Pneumatic parameters: working pressure 6 bar, air consumption 100 l/min The GÜNTHER GTP 600 MC2 is an advanced, industrial machine that combines the functions of a roller steak tenderizer and a pneumatic meat press in a single processing step. The machine is designed for professional meat processing plants, butcher shops, and production lines for cooked and cured meat products. Combining surface scoring with mechanical pressure significantly increases the active surface area for brine absorption, improves protein release, and ensures excellent binding and consistency of the product after heat treatment. The unit is factory-equipped for operation in continuous processing lines, including directly after automatic brine injection machines. The scoring rollers and pneumatically controlled pressing roller automatically adjust their clearance to the thickness of the meat piece being processed (pork, beef, or poultry). This ensures a repeatable processing cycle without damaging the fiber structure, which translates into higher slicing efficiency and an aesthetically pleasing appearance of the finished product’s cross-section.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Nljdpfx Ajgrkigsb Ueg (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Nedpfjxrby Hex Ab Ujlg Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5031183-000 104, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), - Briquetting press with a storage container for compressing textile fibers of various material qualities - Our area of application: textile scraps (dust) from the tearing process - Also suitable for compressing wood scraps - The system was in operation from 2015 to 2020 Technical data: - Briquetting press with a 3kW hydraulic drive - 1400 RPM - 400V, 50 Hz - Briquetting output, depending on the type of chips and moisture content, 80 - 100 kg/h - Complete with 125 liters of hydraulic oil – including oil cooler and base - Transport lines + supports - Pusher plate SB1 with discharge screw, hydraulics, and electrical control, size 2000 x 2000 mm - Screw motor: 1.5 kW, 34.9 RPM - Hydraulic unit: 0.55 kW - Accessories CE: EC Declaration of Conformity according to Machinery Directive 2006/42/EC Note: The system is located in Ulm and can only be inspected there. Njdpfxezcnvke Ab Uelg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, OPTIMUM OPTIdrill DH 40 GP geared drill press – in top condition – used sparingly For sale is a high-quality OPTIMUM OPTIdrill DH 40 GP geared drill press in very well-maintained condition. The machine comes from a private workshop and has only been used occasionally; it is not a production machine intended for continuous use. It functions perfectly and can, of course, be inspected and tested on site. Technical data: - Manufacturer: OPTIMUM - Model: OPTIdrill DH 40 GP - Drilling capacity in steel: 40 mm - Geared drill press with mechanical speed change - Automatic quill feed - Right/left rotation - Precise column and solid worktable - MK4 spindle mount - Coolant system (if available) - Operates on 400 volt three-phase power Condition: - Technically perfect - Very well-maintained - Low operating hours - No backlog of repairs - Ready for immediate use The quality of OPTIMUM is well-known in the professional sector. The DH 40 GP is a stable, durable machine with high precision. New price: 3,804 Inspection: The machine can be inspected and tested under power by appointment. Nledoztl Tmjpfx Ab Ujg Loading can be assisted upon agreement. Private sale, no warranty or returns.

Condition: new, Year of construction: 2023, Chiller unit with 25 kW cooling capacity at 7/12°C, internal P3 pump, internal buffer tank with 110 liters, scroll compressor, coaxial evaporator for process applications. Nedpfjgkan Sex Ab Ujlg

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Nsdezl Rqhspfx Ab Ujlg Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: new, Year of construction: 2026, machine/vehicle number: 06-26-005, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 360 mm, ram plate width: 750 mm, ram plate length: 450 mm, distance table to ram: 800 mm, total length: 2,200 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic single-column press PYE 160 S1/M >completely overhauled / CE marking with  24 months warranty< from the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE conformity Ram stroke: 500 mm Clamping plate, press table: 900 x 580 mm with customer-specific clamping arrangement One-piece C-frame press in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, twist-proof 3-sided protective guard, on the operator side via light curtain, on the side via sliding guard elements SIEMENS control system -new- Conversion to electronic stroke measuring system Remote maintenance ----- Further services, plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touchscreen / visualization SIEMENS • Two-hand control unit with two-channel monitoring of the two-hand synchronous circuit on the press table, (incl. 5m cable) • Limit switches for stroke adjustment are replaced by initiators • Monitoring of the initial stroke after completion Nsdszf Ht Sjpfx Ab Uslg • Replacement of the existing 60-V DC solenoids on the pilot control valves with 24-V DC solenoids, including the necessary intermediate plates • The press has an electronic stroke measuring system (including teach-in function and display of the current ram position). This eliminates the mechanical cam switching mechanism. Hydraulic system • Hydraulic safety block for monitoring the closing movement on the main cylinder • Position-monitored directional control valve for the up and down movement of the ram • Replacement of the motors of the main and control pump • Replacement of the seals on the main cylinder • Fine filter with contamination indicator • All installation and piping work New documentation including CE declaration of conformity Delivery time / Implementation time: approx. 5 months

Year of construction: 1988, condition: used, We are offering this used SNB bench drill press, manufactured in 1988, for sale. The asking price is 500 euros net (negotiable). Nodpfxoz Affbj Ab Uelg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Nljdpfsy Aggpsx Ab Usg Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Nljdpez Ar D Refx Ab Usg Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: new, Year of construction: 2026, CORMAK Z5028W Column Drill Press The CORMAK Z5028W column drill press is a professional metal drilling machine designed for precise and demanding drilling and tapping operations in industrial environments. Its robust construction, wide speed range, and integrated cooling system make it a reliable solution for both workshop and production applications. Main advantages of the machine Tapping capability with right/left spindle rotation – ideal for precise internal thread machining. Integrated cooling system – effectively removes heat, extending tool life and improving machining quality. 12 spindle speed ranges – from 75 to 3200 rpm, allowing optimal adjustment of parameters according to material type and tool diameter. Large spindle stroke – 130 mm – enables machining of deeper holes without interrupting operation. Stable 97 mm diameter column – ensures high structural rigidity and minimizes vibrations during drilling. LED work area lighting – improves precision and operating comfort even in workplaces with limited lighting. Construction and technology The CORMAK Z5028W column drill press is built on a heavy-duty column and cast iron components, including the base, worktable, and spindle head. This design ensures excellent rigidity and resistance to dynamic loads. The worktable is equipped with 14 mm T-slots, allowing quick and secure mounting of machine vices and fixtures. The spindle with an MK3 taper is mounted on precision bearings, ensuring stable rotation and high drilling accuracy. Nljdpfx Aboridquo Ueg Precision and work efficiency Thanks to the 12-speed gearbox, wide spindle speed range, and clear drilling depth indicator, the operator has full control over machining parameters. The reversible spindle rotation function enables safe and efficient tapping operations. The machine provides a large working area – the maximum distance from the spindle tip to the base is 1220 mm, allowing machining of larger components. Applications The CORMAK Z5028W metal column drill press is ideal for use in: industrial and manufacturing plants, locksmith and mechanical workshops, maintenance departments, technical schools and training centers, tool rooms and service companies. Standard equipment Cooling system Drilling depth indicator LED work area lighting Right/left spindle rotation Base with T-slots Technical specifications Parameter Value Maximum drilling diameter 32 mm Spindle taper MK3 Spindle stroke 130 mm Column diameter 97 mm Spindle speed range 75–3200 rpm Number of speeds 12 Worktable dimensions 480 × 380 mm Base dimensions 360 × 535 mm Overall height 2050 mm Motor power 1.1 kW / 400 V Weight 230 kg

Condition: new, Year of construction: 2026, The CORMAK WS16 bench drill press is a compact yet exceptionally robust column drill designed for precise drilling and tapping operations in workshop and production environments. Thanks to the automatic spindle rotation reversal function, the machine enables efficient thread cutting in steel, making it an excellent solution for users who value productivity and machining quality. Nodporif S Rjfx Ab Uslg Key Advantages Built-in tapping function with automatic reverse rotation – simplified internal threading process High spindle rigidity – precise performance even under heavy load and when machining harder materials Solid construction made of seasoned cast iron – ensures operational stability and long service life Large spindle stroke – 100 mm – extended operating range, especially for deep-hole drilling Clear control panel – intuitive operation with quick parameter adjustment U-type spindle guard with limit switch – CE-compliant and enhanced operator safety 360° rotating worktable with mounting slots – flexible positioning and secure clamping of workpieces Design and Technology The CORMAK WS16 metal drill press is engineered with a focus on durability and structural rigidity. The head, column, base, and table are made from high-grade seasoned castings, ensuring excellent stiffness of the entire structure. The spindle and transmission shafts are manufactured from hardened, heat-treated steel to minimize wear during prolonged use. The drive mechanism is based on a belt transmission system, valued for its quiet and stable operation. Precision and Performance With 5-step spindle speed adjustment ranging from 480 to 1875 rpm and an MK2 Morse taper, the machine allows optimal parameter selection according to material type and drilling diameter. Maximum drilling capacity in steel: 16 mm Maximum tapping capacity in steel: M10 The clear control panel and the ability to switch spindle rotation direction significantly streamline operation while increasing overall efficiency. Applications The CORMAK WS16 column drill is ideal for: metalworking and mechanical workshops maintenance departments training workshops and educational centers single-piece and small-batch production applications requiring high repeatability and precision in drilling and tapping Standard Equipment Adjustable drill chuck with key (MK2 Morse taper) Drift key for taper removal Spindle guard with safety limit switch (CE compliant) Belt transmission cover with limit switch Technical Specifications Parameter Value Max. drilling diameter (steel) 16 mm Max. tapping diameter (steel) M10 Column diameter 70 mm Column wall thickness 12.7 mm Spindle stroke 100 mm Spindle–column distance 193 mm Spindle–table distance (max) 330 mm Spindle–base distance (max) 613 mm Spindle taper MK2 Speed range 480–1875 rpm Number of speeds 5 Table dimensions 265 × 285 mm Base dimensions 360 × 480 mm Machine height 1130 mm Motor power 1.1 kW Power supply 400 V Net weight 131.5 kg Machine dimensions 600 × 400 × 1150 mm

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, * Drilling head with 8 spindles (V8 SW/32) * Horizontal drilling head with 4 spindles on the X-axis * Horizontal drilling head with 2 spindles on the Y-axis * Groove saw, D=100 mm (X-axis direction) * Clamping cylinder for positioning the workpiece * Workpiece clamping system Nledpfx Aevtyc Hsb Ueg * Workpiece length 2500 mm * Workpiece thickness 12-60 mm * WOODWOP for the machine * WOODWOP IMPORT DXF BASIC (1 license)

Condition: new, Year of construction: 2026, CORMAK W16 Bench Drill Press for Metal with Tapping Function – Precise and Reliable Drilling Machine The CORMAK W16 metal bench drill press is a precise and reliable column drilling machine equipped with a tapping function. Designed for professional applications, it is suitable for locksmith workshops as well as industrial production lines. The integrated spindle rotation direction change system makes it an ideal solution for both drilling and internal thread cutting operations. Main advantages of the machine Tapping function with automatic spindle rotation reversal – provides full control over the process without the need for manual gear changes. Manual rotation direction change using a foot lever – allows precise tool retraction during special operations. High spindle rigidity – ensures accurate holes even during long operating cycles. Adjustable drilling/tapping depth setting – protects against exceeding the specified technological parameters. Tilting and rotating worktable – adjustment of ±45° horizontally and full 360° rotation around the column. Belt drive system – ensures quiet operation and reduced vibration. Built-in overload protection – safety limit switch installed in the belt transmission guard. Construction and technology The CORMAK W16 column drill press is based on a highly rigid cast iron construction, ensuring stable operation even with maximum quill extension. The spindle with an MK2 taper provides compatibility with a wide range of tools. The belt drive system offers five speed ranges (480–4100 rpm), allowing precise adjustment of operating parameters to the properties of the processed material. Precision and work efficiency Thanks to the 100 mm spindle quill stroke and adjustable drilling depth, the operator has full control over every stage of machining. The integrated tapping function makes the W16 a versatile machine for both drilling and thread cutting while maintaining high repeatability. The spindle speeds have been selected to provide optimal efficiency for drilling holes and producing metric threads in materials with different hardness levels. Applications The CORMAK W16 metal bench drill press is an ideal solution for: mechanical workshops and tool rooms, maintenance departments, assembly and production lines, technical schools and training centres. The machine is suitable wherever a precise drill press with tapping capability is required for machining steel, aluminium and engineering plastics. Standard equipment Self-locking B18 drill chuck MK2 drill chuck arbor Foot lever for changing rotation direction Belt transmission guard with limit switch Technical specifications Parameter Value Maximum drilling diameter 16 mm Spindle quill stroke 100 mm Spindle taper MK2 Spindle speed range 480 / 800 / 1400 / 2440 / 4100 rpm Nedpfxerif Iuo Ab Uelg Spindle axis-to-column distance 193 mm Table dimensions 200 × 230 mm T-slots (table/base) 18 mm / 14 mm Base dimensions 528 × 360 mm Maximum spindle-to-table distance 315 mm Maximum spindle-to-base distance 556 mm Horizontal table rotation range ±45° Table rotation around column 360° Motor power 750 W / 400 V Weight 90 kg

Condition: new, Year of construction: 2026, CORMAK ZS-40HS Pillar Drill The CORMAK ZS-40HS is an advanced pillar drilling machine for metalworking, designed for intensive industrial use. Featuring a hardened gear transmission system, large drilling capacity, and tapping capability up to M32, this model is a reliable solution for manufacturing plants, metalworking shops, and maintenance departments. Key Advantages Large drilling capacity – up to 40 mm – suitable for machining a wide range of materials and thicknesses. Tapping function with automatic spindle reversal – enables fast and efficient thread cutting up to M32. Precision oil-bath gearbox – 6 spindle speeds provide optimal speed adjustment (95–1600 rpm) for various machining operations. Rotating head with height adjustment – increases flexibility and allows drilling at different angles. Rigid 115 mm diameter column – ensures excellent stability even under maximum load. Njdpfxjriduxe Ab Ujlg Large worktable with height adjustment and vise mounting capability – facilitates machining of large workpieces. Construction and Technology The CORMAK ZS-40HS industrial drill press is built with heavy-duty cast iron components and a reinforced 115 mm diameter column, ensuring maximum rigidity and vibration reduction. The transmission system is based on hardened, precision-ground gears, providing exceptional durability and reliable power transmission. The 120 mm spindle travel and MT4 spindle taper allow the use of a wide range of drill bits and tapping tools. Precision and Performance The CORMAK ZS-40HS metalworking pillar drill offers high drilling accuracy and repeatability thanks to its mechanical gearbox and precision handwheel with depth scale. Flexible adjustment of both the drilling head and worktable height allows the machine setup to be tailored to specific machining requirements. The powerful motor (1.1 kW continuous duty S1, 1.6 kW intermittent duty S6) ensures efficient operation even when drilling large diameters. Applications The CORMAK ZS-40HS column drilling machine is designed for industrial applications, particularly in: Manufacturing and processing plants Metalworking workshops Maintenance departments Tool rooms Technical schools and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Spindle travel 120 mm Column diameter 115 mm Spindle speed range 95–1600 rpm Number of speeds 6 Worktable dimensions 575 × 354 mm Base dimensions 385 × 330 mm Motor power S1: 1.1 kW / S6: 1.6 kW Power supply 400 V / 50 Hz Overall height 2100 mm Weight 350 kg

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm Nljdpfx Abey Ec H Rj Usg - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: like new (used), Year of construction: 2024, Pellet production plant – complete line – fully automated Salmatec press Rematec hammer mill Belt dryer VAI bagging machine Cooler Sifter Palletizer Less than 1000 operating hours – certified Njdpozg Eudofx Ab Uelg Option for on-site reinstallation Option for on-site operator training

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Nlodpfxezl Shzj Ab Usg Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Njdpsz D Ihfefx Ab Uolg

Condition: used, Year of construction: 1992, Used Machine Year of Manufacture: 1992 Features and Technical Specifications: - Electrically and oil-hydraulically controlled frame press - Pressing force up to 1,200 kg - Two movable longitudinal pressure beams are mounted on double ball bearings and guide rails - These rails allow for continuous height adjustment of the cylinders - The press cylinders are adjusted via a pressure lever with quick-adjustment and self-locking mechanism - Two electrically-controlled oil-hydraulic directional control valves (with 3 operating stages) are operated by hand levers - This allows you to press with precision and assemble even the most complex frame structures Nodpfxszk Nl Uo Ab Ujlg - Working height x working length: 2000 x 3000 mm - With 3 vertical pressure cylinders - With 2 horizontal pressure cylinders - Pressure cylinder stroke: 120 mm - Three-phase motor: 1.3 kW - Pressure control unit/press pressure adjustable from 0 to 60 atü Dimensions: 3950 x 900 x 2550 mm Weight: approx. 620 kg Availability: available shortly Location: Flörsheim