Used Hedelius Cb 80 / 3200 for sale (20,270)

Condition: good (used), machine/vehicle number: 16925, Year of construction: 2018, operating hours: 3,193 h, load capacity: 8,000 kg, lifting height: 3,450 mm, load center: 500 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork length: 2,000 mm, front tire size: 8.25-15, rear tire size: 250-70/15, overall weight: 12,800 kg, Equipment: cabin, 5087803 Guodpoyvmwnefx Akasg Serial Number: 517343J00030

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW Godpfx Akjy D Hupjaeug -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit Gedpfoy Hkd Hjx Akasug For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), CNC control, power supply, switching power supply, controller, control unit, Promodul -Manufacturer: AEG, control unit -Type: LOGISTAT CP 80-A04.1 Gusdpfx Akoy Tlduoaog -Dimensions: 485/130/H170 mm -Weight: 5.3 kg

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings Gedpfxoy H N Hms Akasug - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: ready for operation (used), Year of construction: 2019, pressing force: 82 t, stroke length: 300 mm, overall weight: 7,000 kg, number of axes: 4, This full electric drive SAFAN E-Brake Premium 80-2550 was manufactured in 2019. It features a pressing force of 80 tons and a bending length of 2550 mm, ensuring robust performance for various applications. The machine is equipped with a maximum stroke of 300 mm and a backgauge with 4 fingers for enhanced precision. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake Premium 80-2550 press brake we have for sale. Contact us for further details. • Power supply: 3 x 400 V, 50/60 Hz, N/PE • Connected load: 11 kW • Axis configuration: 4 CNC axes (Y1, Y2, X, R) • Manual Z-axis adjustment • Backgauge with 4 fingers • Condition: Very good, fully operational, regularly serviced and maintained • Note: Tooling is not included • No crowning needed • Manual, quick-release tool clamping system Promecam Advantages • Full electric drive Godpezd Uv Sjfx Akaoug • Up to 30% higher productivity • Up to 50% energy saving • No harmful hydraulic oil, low CO2 emissions • Noiseless operation • Full working length backgauge Technical Specification Bending Length 2550 mm

Condition: excellent (used), Year of construction: 2010, 423 USED Electric rotary rack oven. Rack: 60x100 or 60x80. Price is for 1 oven. EXTERNAL DIMENSIONS (in cm): - W: 179, - L: 178 (+ hood: 234), - H: 250. TECHNICAL DATA: - Power: 75 kW / 400 V. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Godpfx Aozi Dirskaeug Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: used, machine/vehicle number: 14064, Rotor diameter: 500 mm Rotor width: 840 mm Gjdeyyrhtepfx Akaeug Rotor knives: 5 Stator knives: 4 Feed opening approx.: 840 x 500 mm Drive motor: 55 kW

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 Gujdpfsyt Itqjx Akaog ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 10 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ - Cutting frequency: 10 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 15 kW - Weight: 10,000 kg - Dimensions (L × W × H): 4050 × 2050 × 1950 mm - Controller: ESTUN E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Front and rear safety guards - Foot-control pedal - ESTUN E21S controller - Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, alignment support -Square profile: clamping base, support profile, alignment base -Length: 515 mm -Number: 3x profile available -Price: per piece -Dimensions: 515/97/80 mm Guedpfey Iv Iysx Akaeg -Weight: 28.3 kg/pc.

Condition: excellent (used), Year of construction: 2018, - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Gsdpfx Ajzbnnwokajug Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Gedpfx Akjy U I Tueajug Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: used, tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm Guodju Tytyjpfx Akajg -Weight: 4.5 kg/total

Condition: used, tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder -Milling holder: SK50 holder -Shaft: Ø 80 mm / bore Ø 50 mm -Dimensions: Ø 98 x 235 mm Guodpfx Akjvaxcleaeg -Weight: 5.3 kg

Condition: new, PRICE: 2850 EUR Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Godpfx Aouu Evwjkajug Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Condition: good (used), Year of construction: 2006, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank from vertical lathe Scherer VDZ 80 DS -Motor: ATB 0.5 kW / 2820 rpm Godpfx Asvw Rt Dskaeug -Individual components: see photos -Dimensions: 360/190/H540 mm -Weight: 14 kg

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Guodpfxovw S Rwe Akaog Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: good (used), Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg Gsdpfx Aovpf Utskaoug

Condition: used, mileage: 3,87,000 km, power: 130 kW (176.75 HP), first registration: 06/2008, empty load weight: 6,015 kg, maximum load weight: 1,440 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 4,850 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, total length: 8,400 mm, total width: 2,550 mm, total height: 3,150 mm, loading space length: 5,100 mm, loading space width: 2,470 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, crane, low noise, parking heater, Vehicle location: Bovenden, aluminum body, Lg. House, 1x air seat, 1x lounger, electric mirror, heated mirror, sun visor, radio, auxiliary heating, switch 6, ABS (anti-lock braking system), work lights, rotating beacon, leaf suspension, trailer coupling ball head, trailer coupling air+light, noise reduction G1, lashing eyes, emergency stop, grab control, foldable, high seat, 2-point mechanical support, 2x hydr. extensions, green environmental badge Wheelbase: 4850 mm Body: platform with Hiab 060-2 rear loading crane, 7 m - 850 kg, load diagram 1.50 m - 3,200 kg, 2.20 m - 2,400 kg, 3.20 m - 1,800 kg, 5 m - 1,160 kg, 7 m - 850 kg, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Godpfjvhhx Esx Akasug - .

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Gjdjvkuqmopfx Akaeug Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm Gjdpfxsxupy Tj Akasug -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg

Condition: used, Panel saw Minimax 3200, in very good condition, standard equipment, 4 kW Gujdpfjx H Uitsx Akaog Price changes reserved. Errors, misprints and typographical mistakes excepted.

Condition: used, Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, cutter holder with coolant channel in original packaging -Type: HSK 63-12-80-K .: A63.04.12.K -Transport dimensions. 470/100/H95mm -Weight: 1.2 kg Godpfx Ajr Dgi Tokaoug

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Guodpfx Akjr D N Eqoasg working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: new, Technical data for the pallet racking crossbeam: Racking system: SSI Schäfer Type: PR600 Included in the scope of delivery: 01x Pallet racking crossbeam, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Clip: 5 HK (hooks) 2,400 mm clear span Guedpfx Aeku A Epokajg 02x Locking pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting.