Used Hella Particle Counter for sale (3,286)

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: Ijdpfxjq Nyuvs Acrsic 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance. Iedpjq Nga Uefx Acroic

Condition: used, mileage: 4,65,963 km, power: 120 kW (163.15 HP), first registration: 02/2013, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 07/2026, color: green, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space volume: 14 m³, loading space length: 4,300 mm, loading space width: 1,770 mm, loading space height: 1,910 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle ref. no. for customer inquiries: 226 ----Sales vehicle featuring: * Electrically operated sales hatch * Glass lifting mechanism in the showcase * Refrigerator * WAECO 230V/12V * Socket in driver's cab * Sink with hot water boiler * Shelves * Sales counter ----Special equipment: * Audio system Audio 20 (radio with CD player) * External temperature display * 100 Ah battery * Omission of load compartment/sliding door * Windows in rear doors * Rear door windows in privacy glass * Multifunction steering wheel incl. trip computer * Programmable special module * Spare wheel with road tires * Spare wheel holder under rear frame incl. jack * Reversing camera * Rear mud flaps * Front mud flaps Ijdoylfa Sjpfx Acrjic * Cab seats: driver’s seat heated * Cab seats: comfort suspension seat, driver’s side * Reinforced rear stabilizer * Reinforced front stabilizer * Step for rear door * Tachograph pre-installation * Auxiliary heater (air), electric ----Standard features: * Third brake light * Adaptive brake light * Driver’s airbag * Anti-lock Braking System (ABS) * Drive type: rear-wheel drive * Washer fluid level indicator * Electrically adjustable & heated exterior mirrors, both sides * Exterior mirrors with integrated indicator lights * Brake system with ABS + ASR * Roof lining in driver’s cab * Electronic Stability Program (ESP) * Electric window lifts (2x) * 6-speed manual gearbox – TSG (Eco Gear) * Lockable glove compartment * Rear doors (opening angle 180 degrees) * Body/superstructure: standard high roof panel van * Child safety lock * Fuel tank: main tank 75 liters * Full-length bulkhead * Load anchoring/tie-down rings * Headlight range adjustment * Engine 2.1 L – 120 kW CDI CAT * Particle filter * Wheelbase 4,325 mm * Smokers’ package * Low emissions according to Euro 5 standard * Power steering * Seat belt system with warning device (driver) * Seat cover/upholstery: Lima fabric * Cab seats: front passenger seat with armrest * Cab seats: front passenger seat adjustable * Cab seats: driver’s seat with armrest * Maintenance interval indicator Assyst * Immobiliser * Heat-insulating glazing * Central locking with remote control * Gross vehicle weight 5,000 kg * Twin rear wheels on 2nd/rear axle ----Technical data: * Wheelbase: 4,325 mm * Cargo area dimensions: L: 4,300mm W: 1,770mm H: 1,910mm * Payload: 1,240 kg * Tire size: 205/75R16C ----German vehicle! * 17,850.-Euro §25a UStG (Gross=Net) * MOT/emissions test valid until 07/2026 * For export to non-EU countries or within the EU, a security deposit is required. This will be refunded after successful customs clearance or delivery to the buyer. * Worldwide delivery possible – please ask us for your individual offer! * We are happy to take your used vehicle in part-exchange! * Financing/leasing available even in difficult cases * This description is for general vehicle identification only and does not represent a warranty in terms of purchase law. * The information provided does not claim to be complete. The specifications/descriptions/images are non-binding and do not represent guaranteed features. * We accept no liability for errors or obvious mistakes. * The buyer is obliged to independently ver

Condition: used, mileage: 2,81,811 km, power: 315 kW (428.28 HP), first registration: 07/2014, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, color: white, gearing type: automatic, emission class: euro6, loading space volume: 19 m³, loading space length: 6,500 mm, loading space width: 2,400 mm, loading space height: 1,200 mm, Year of construction: 2014, Equipment: ABS, air conditioning, soot filter, RIGHT-HAND DRIVE! RIGHT STEERING!!! * AROCS 3243 K 8x4 Tipper Body 6m RHD * Vehicle Number for Customer Inquiries: 2970 * Vehicle configured for left-hand traffic * Euro VI engine version * PTO pump, installed below the frame top edge * Air conditioning * Axle configuration: 8x4/4 * Rain/light sensor * Axle configuration: 8x4 * Weight variant: 32.0 t (7.1/7.1/9.5/9.5) * Rear suspension: 2 x 10.0 t, heavy-duty * Front suspension: 2 x 7.5 t, 3-leaf spring * Fuel tank 290 l, left side, 650 x 565 x 950 mm, steel * Wheelbase: 5150 mm * Single PTO * Arocs * Cruise control * Underrun protection plate under bumper * Engine brake, standard system * Digital tachograph, EC-compliant, with rev counter * Mercedes PowerShift 3 * Central locking system * Air horn * Reverse warning system, combined with hazard lights * Driver's air-suspension seat, standard * Electronic braking system with ABS and ASR * Particle filter * Anti-lock braking system (ABS) * Environmental sticker (green) * Two-seater * Tank protection plate * Tubeless tires, 295/80 R 22.5 Rear Axle * Tubeless tires, 295/80 R 22.5 Front/Leading/Non-leading Axle * Reinforced stabilizer, 2nd rear axle * Engine: OM470, R6, 10.7 l, 315 kW (428 hp), 2100 Nm * AdBlue tank, 25 l * Tipper chassis * Driver cab rear wall with window * M-Cab ClassicSpace, 2.30 m, 170 mm tunnel * Roof hatch/ventilation flap * Sun visor, driver's side * Headlamp stone guard, metal * Rotating warning beacon, yellow, front left and right * Gearbox: G 281-12/14.93-1.0 * ABS, can be switched off * Full service history * 2/3 doors No liability for printing or typographical errors Sale only to traders Subject to prior sale and changes. All information and changes, prior sale and errors expressly reserved. Description is for vehicle identification only and does not constitute a warranty in the legal sense. The purchase contract description is decisive. * TOP SERVICE + QUALITY * We can provide you with a LEASING-FINANCING-RENTAL PURCHASE offer * Warranty insurance available on request through the insurer * TÜV / UVV LBW / tachograph inspection and OBU installation in cooperation with our local partners * 30-day export license plates available * All export customs documents possible – must be requested specifically * Toll-Collect toll registration can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * Iodpokf Sayjfx Acreic ---- Visit our website at * Over 200 vehicles in stock at all times.

Condition: used, mileage: 7,18,811 km, power: 310 kW (421.48 HP), first registration: 11/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, ACTROS 1842 LS Tractor Unit * STREAMSPACE long cab * Vehicle No. for customer inquiries: 3796 * Euro VI engine version * Predictive Powertrain Control * Radio/navigation system with Bluetooth, comfort package * Rear axle air suspension * L-cab StreamSpace, 2.30 m, 170 mm tunnel * Air conditioning * Rear axle differential lock * Electronic Stability Program (ESP) * High Performance Engine Brake * 390 l fuel tank, left side, 650 x 700 x 1000 mm, aluminum * L-cab * Electrically operated roof hatch * Hot water auxiliary heater, cab * Comfort lower bed * Aerodynamic side fairings * Actros * Cruise control * Driver airbag * Active Brake Assist 2 * Digital tachograph, EC-compliant, rev counter * Mercedes PowerShift 3 * Transmission G 211-12/14.93-1.0 * Comfort central locking system * Central locking with keyless entry * Air horn * Adjustable air deflector with rear edge flaps * Reversing alarm, combined with hazard warning lights * Comfort suspension seat for driver * Electronic brake system with ABS and ASR * Particle filter * Environmental badge (green) * Two-seater * Weight variant 18.0 t (7.5/11.5) * Engine OM 471, R6, 12.8 l, 310 kW (421 HP), 2100 Nm * Work lights, rear of cab, top * AdBlue tank 60 l, left * Tubeless tires 315/70 R 22.5 drive axle * Tubeless tires 315/70 R 22.5 front axle/steer axle/non-driven axle * 24 V trailer socket, 15-pin * Drawers under bed * Driver's side sun roller blind * Front axle stabilizer Iiederbctqopfx Acrjc * Wheelbase 3700 mm * Heater, electronic compressed air supply unit * Fifth wheel coupling, without mounting plate * 1 multifunction key and 1 remote key * 2/3 doors No liability for typographical or printing errors Sale to trade customers only Subject to prior sale and changes; amendments, prior sale, and errors reserved. This description serves to identify the vehicle and does not constitute a warranty under sales law. The specification according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING–FINANCING–HIRE PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and installation of the OBU unit can be arranged via our local partners * Export license plates for 30 days All export customs documents can be provided upon request, but must be requested individually * Toll for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) railway station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,820 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,284 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Loading space length: 13,820 mm ? Height: 3,284 mm ? Width: 2,550 mm ? Loading space length (inside): 13,620 mm ? Loading space width (inside): 2,480 mm ? Fifth wheel height: 1,150 mm ? Permissible total weight: 36,000 kg ? Empty weight: 6,530 kg ? Container locks for the following containers: - 1 x 40', 2 x 20' and 1 x 20' in the middle up to 25 ton _____ Axles ? Krone axles with disc brakes Isdpfxjv E Tpdo Acreic ? 1st axle lift axle ? Air suspension ? Wheel chocks ? Axle cap KM counter ? Tire brand: According to manufacturer's choice: 385/65 R22.5 ? KRONE TPMS control unit ? EBS ? Steel rims ? KRONE, air-sprung unit + self-steering axle _____ Structure / attachments ? Mechanical supports ? Steel bulkhead with stable corner stanchions, 2,000 mm high ? Internal bulkhead reinforcement with 9 mm thick ? 2 warning signs ? 2 sets of over-width signs including outline light ? Pallet storage box, closed, for 24 Euro pallets ? Stanchion depot on the left and right sides for 6 insert stanchions ? Forklift bracket ? Folded underrun protection ? KRONE Telematics KSC ProPlus Dry 2 ? Max. 7,000 kg forklift axle load ? 30 mm thick waterproof plate floor _____ Lighting / electrics ? LED side marker lights with direction indicator ? Rotating beacon (orange) including rod holder ? Multifunctional rear lights (full LED), Hella (Gen.2) ? 2x LED license plate lights _____ Paint finish ? Chassis: jet black - RAL 9005 ? Axle hub: jet black - RAL 9005 ? Front wall: light grey - RAL 7035 ? Rims: silver natural

Condition: used, mileage: 61,600 km, power: 125 kW (169.95 HP), first registration: 07/2023, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,325 mm, color: white, emission class: euro6, number of seats: 3, loading space volume: 19 m³, loading space length: 4,300 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, construction height: 2,282 mm, working width: 2,035 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, soot filter, traction control, Transmission: GTronic automatic (9-speed), Air conditioning, regulated (Tempmatik), Keyless start, Exterior mirrors, electrically adjustable and heated - both sides, Electric windows, 2-way, Hill-start assist, Cruise control system (Tempomat), Multifunction steering wheel, Rear view camera, All-season tires, Light sensor, Daytime running lights, DAB tuner (digital radio reception), MB audio system with radio, USB, and Bluetooth hands-free system, Hands-free system, Mercedes-Benz emergency call system, Long wheelbase, Heat-insulating glass (windshield with band filter at the top), Storage package, Rev counter, Airbag, driver side, Anti-lock braking system (ABS), Electronic stability program (ESP), Comfort seats, Center armrest, Driver comfort seat with armrest and lumbar support, Start/stop system, Engine, Particle filter, Immobilizer, Headlamp range adjustment, Box body, Boundary lights, Exterior temperature display, Power steering, Paint: ARCTIC WHITE, Communication module (LTE) for digital services, Interior trim, rear wall, Extended exterior mirror base, left/right, Connection strip for electrical connections (driver's seat box), Passenger double seat, Comfort lighting in the passenger/cargo area, Chassis: Stabilization level II, Underrun protection, rear, Socket (12V connection) in the cab, Seatbelt system with warning system (passenger side), Acoustic package, Truck registration, Permissible total weight 3.50 t, Noise reduction measure, external, Towing eye, rear, Automatic activation for headlights, Adaptive brake lights, Marker lights, side, Service interval display Assyst, Display for windshield washer fluid level, Storage compartment below the dashboard, passenger side, Headliner in the cab, Seatbelt system with warning system (driver side), Storage compartment above the windshield, Electronic brake-force distribution (EBV), Brake assist, Steering wheel (steering column mechanically adjustable), Traction control system (ASR), Crosswind assist, Fleece battery 92 Ah, Generator 200 A, Fuel tank: Main tank 71 liters, Body/superstructure: Box body, Wheelbase 4325 mm, Drive type: Rear-wheel drive, Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank, or Auto Europa Bank; we will be happy to advise you. This offer is non-binding, and no guarantee is given for equipment details. The listed equipment may need to be checked separately. Subject to change, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. We will also accept your old vehicle in part exchange. Retrofitting options include: - Trailer couplings, up to 3500 kg possible - Auxiliary heaters - Screen for rear view camera or navigation via mobile phone (Android Auto) - Rear view system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Ijdpszcd Ntofx Acrjic

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) Isdpfx Acsy Ey Nijroic - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Iiedpfjy T Hbbex Acrjc

Year of construction: 2011, condition: used, Tank & Environmental Protection Wozniack – Specialist Company under the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank with a 70 l/min pump installed in a lockable pump cabinet. Quantity: 1 Used; fully overhauled – the tank has been cleaned, refurbished, primed, and painted. Color: RAL... as per customer’s color request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Tank for above-ground installation. Shape: Cylindrical, mounted on 2 saddle supports Tank dimensions: Length: approx. 5,350 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket - Filling pipe 2" with TW closure (filling cap) - Suction pipe 1 ¼" - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½" - Limit switch with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied loose Tank suitable for installation outside of earthquake/flood zones. Diesel pump 70 l/min incl. particle filter, on/off switch and tank key operation. All installed in a lockable pump cabinet. Simple pump with a total counter Dispensing hose 4 m (extendable) Motor: 0.5 kW, 230 V, 4.2 A Installed with: Pipelines with ball valve, check valve and tank bracket. Excellent offer. Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and tested by selected employees in our company. Iedpfx Ajcnik Socreic We also offer cost-effective delivery upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. The price for the tank system applies ex works Warstein, unloaded. Delivery can be offered at a reasonable additional cost. Delivery time: short notice You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: new, machine/vehicle number: 1602-2-2, mileage: 5 km, power: 96 kW (130.52 HP), fuel type: diesel, empty load weight: 2,750 kg, maximum load weight: 750 kg, overall weight: 3,500 kg, wheelbase: 3,445 mm, fuel: diesel, CO₂ emissions: 196 g/km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Citroen Jumper Euro6 3500Kg new vehicle EU new car Mileage 5 km Fuel Diesel kW/hp 96/131 Manual gearbox 6 gear ccm 1.997 cm³ Particle filter, air conditioning, daytime running lights, reversing camera, ESP, ABS, on-board computer, heated mirrors, electric front windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Sales body made of GRP Superlight in sandwich construction with alcove, unused and with a large sales hatch across the entire width of the vehicle on the right, 2/3 seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Box body interior dimensions WDH 3500 x 2250 x 2300 mm Side flap 3270 x 1480 mm Permissible total mass 3,500 kg Unladen weight 2,750 kg Paint finish on request Interior fittings Iisdpfxsf D Eg Ts Acroc Left-hand side: 1 work surface with stainless steel worktop, sliding doors and intermediate shelf, approx. 3500 x 600 x 850 mm 1 double washbasin approx. 600 x 600 x 850 mm WxDxH incl. fresh and waste water tank, boiler and pressure system, soap and paper dispenser. 12V automatic battery charger for the starter battery. 4 wall shelves in white with aluminum edge profile, 2x left 1250 mm and 2x right 1250 mm. Right-hand side: 1 refrigerated counter in 800 mm depth with compressor, storage compartment with extra doors at the bottom, foam insulated housing, display surface in stainless steel, aluminum work surface and front glass, temperature from +1°C to 7°C, approx. 3500 x 800 x 1100 mm WxDxH. Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. 2 LED panels on the ceiling, 3 dimmable LED spotlights above the sales counter and LED counter lighting. Standard electrical installation 380 volt/16A switchable to 230 volt/16A, 2x feed socket according to CEE standard, RCD circuit breaker, 16 ampere fuse with acceptance, 5 double sockets, hygiene package. Subject to errors and prior sale!

Condition: new, Year of construction: 2024, functionality: fully functional, Kyori High Speed Press VX50-1500 with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Iiodpjwhk Dpjfx Acrsc Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: new, Year of construction: 2024, Kyori High Speed Press VX50-1100 with variable stroke adjustment Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left colour: Kyori white RAL 7035 position of main drive: right ram adjustment range: 55 mm shut height max.: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED lights Bolster area (LxW): 1100 (1140) x 600 mm Bolster design: T-slot Bolster material: steel Bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm ram design: T slot dimensions: 2300 x 1600 mm total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive Iisdjtndfrepfx Acrsc - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: good (used), mileage: 1,56,814 km, power: 110 kW (149.56 HP), first registration: 10/2018, fuel type: diesel, wheelbase: 3,000 mm, fuel: diesel, fuel tank capacity: 70 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 4,900 mm, total width: 1,900 mm, total height: 1,970 mm, permissible axle load (axle 1): 1,600 kg, permissible axle load (axle 2): 1,550 kg, Year of construction: 2018, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, soot filter, tire pressure monitoring, traction control, = Additional options and equipment = Iedsy It Rfepfx Acrjic - Alarm system - Armrest - Audio controls on steering wheel - Exterior mirrors with indicator lights - Automatically dimming interior rear-view mirror - AUX socket - Outside temperature display - Cup holder - Passenger airbag - DAB radio - Rev counter - Third brake light - Driver airbag - Driver seat height adjustment - Remote central locking - Tinted glass - Rear doors - Height-adjustable steering wheel - Height adjustment for front seats - Cabin - Foldable exterior mirrors - Air conditioning - Comfort seats - Leather steering wheel - Alloy wheels - 18-inch alloy wheels - Metallic paint - Multifunction steering wheel - Rear parking sensors - Front parking sensors - Particle filter - Radio/CD player - Disc brakes - Headlight height adjustment - Side door - Immobiliser - Body-coloured bumpers - Partition wall - Anti-theft device - Partition wall without window = Further information = General information Cabin: single Technical information Number of cylinders: 4 Engine displacement: 1,968 cc Max front axle load: 1,600 kg Max rear axle load: 1,550 kg Weights Curb weight: 1,857 kg Payload: 943 kg Gross vehicle weight: 2,800 kg Functional Bodywork manufacturer: DSG Interior Upholstery: leather Maintenance Technical inspection (APK): valid until 11.2026 History Booklets: available (dealer maintained) Condition Technical condition: good Visual condition: good Damages: none Financial information Price: On request VAT/margin scheme: VAT deductible = Company information = Nidro cars Holland is located in the centre of the country and is the right address for the purchase of your car, van, or truck. The indicated price is the 'internet take-away price.' For questions or a test drive, please contact us: CHECK OUT OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from their content.)

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Iisdpfx Acsyw N Acjrec Glass, plastics, various containers filled with liquids, etc.

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. Iisdpfefpa Awox Acrjc - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Condition: used, Year of construction: 2016, color: white, - Aerial Work Platform: KLUBB K26, 1 person / max. 120 kg, working height approx. 12 m. Can be operated from basket and via remote control. 1,199 operating hours. Airbag: driver side, ABS with EBD and brake assist, ESP with ASR, outside temperature display, heat-insulating glazing, rev counter, electric window lifters (front), height-adjustable headrests (3), electrically adjustable and heated exterior mirrors, transmission: 6-speed manual gearbox, power steering, two 12-volt sockets (front), 180 A alternator, mini wheel arch covers, tire repair kit, wheels: 16" steel rims, storage compartments in front doors, overhead shelf above windscreen, ashtray & cigarette lighter, three-point seatbelts on all seats, cupholders, lockable glove compartment, height-adjustable steering wheel, pollen filter, upholstery: fabric, driver's seat height-adjustable, paintwork: solid color, soot particle filter, self-cleaning, upshift indicator, electronic immobilizer, central locking with remote control, seats: front double passenger bench, built-in shelfing for tools. We are happy to make you an offer for the trade-in of your used vehicle. If you wish to lease or finance your vehicle, we can also provide a tailored offer. Errors and prior sale excepted. Mr. Rudolph and Mr. Seidel will be happy to assist you by phone at: . - Central locking, power steering, ABS, ESP, particle filter, partition wall Cab type: Local transport = Further information = Mileage: 193,000 km Iiedpfxjyfrvaj Acrsc Unladen weight: 3,500 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2020, operating hours: 2,640 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, Equipment: air conditioning, hydraulics, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Iisdpswzwakofx Acrjc Travel speed (km/h): 60 Working width with 2 side brushes (mm): 2,625 Maximum working width with 3 side brushes (mm): 2,710 Hopper capacity (l): 2,500 Fresh water tank (l): 200 Optional fresh water tank (l): 390 Permitted total weight (kg): 6,000 Dimensions (L × W × H) (mm): 4,491 x 1,300 x 1,999 Particle filter Comfort seat Heating and air conditioning Heating Hopper: 2,500 l Radio system Rotating warning beacon Water tank: 120, 400 l Year-round use This KÄRCHER MC250 was built in 2020, has only 2,640 total operating hours and 1,820 sweeping hours according to the counter, and is in good overall condition with typical signs of use and wear, immediately ready for operation. Comparable new price: €200,000! - Gross price: €59,900 // Net price: €50,336 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized. Shipping costs depend on distance! - Attractive leasing/financing offers available through our leasing partner—contact us for details!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Iisdpfx Aeza Alhjcrec Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: ready for operation (used), Year of construction: 2007, operating hours: 36,012 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, controller model: 3D Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 635 mm Travel range, Y-axis: 460 mm Travel range, Z-axis: 510 mm Spindle speed range: 20 - 10,000 rpm Table dimensions: 790 x 560 mm Table load capacity: 600 kg Tool holder: SK 40 Number of tool magazine slots: 20 MACHINE DETAILS Control system: 3D Heidenhain i TNC 530 Total power consumption: 13.9 kW Operating hours (according to counter) Spindle hours: 36,050 h Power-on hours: 91,000 h Iisdpfxszb Dzmj Acrec Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,150 mm Machine weight: 3.6 t

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Iiedpfxjzb Du Hs Acrjc Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Iiedpfxezcxwrj Acrsc Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Isdpfx Aszdqdfocrsic Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Isdozb Idrepfx Acroic Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Iedpfx Aozck Txecreic Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader