Used Herbold T 2015 for sale (71,803)

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Dsdpfxjwfg E Ds Adrokr

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Dsdpfsubyyvex Adrekr

Condition: ready for operation (used), Beautiful granulator with good rotor motor is tested before billing Dkjdjnxk Rzjpfx Adrer

Condition: new, Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: Dkedpfx Adei E St Sjrer - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Condition: good (used), Year of construction: 2009, rotor diameter: 1,000 mm, rotor width: 1,600 mm, Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Djdsi E S Sqjpfx Adrokr Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Condition: as good as new (ex-display), Hammer mill Manufacturer: NEUE HERBOLD Type HM 450 / 300 Drive: 18.5 kW - show room machine - crushing of brittle plastics such as electronic scrap, wood scrap, and organic insulation material. Dsdpfxjbxadno Adrskr

Year of construction: 2016, condition: as good as new (ex-display), functionality: fully functional, Friction washer Manufacturer: Neue Herbold Dkedpjbxadlsfx Adrsr Drive: 22 kW for cleaning of regrind, especially film flakes, PET- bottles flakes and other hard plastic materials.

Year of construction: 1988, condition: ready for operation (used), The offer includes: Infeed conveyor by Herbold Metal detector by S&S Dkedeyi Hbfjpfx Adrsr Granulator by Herbold with 8, 10, and 12 mm screen baskets Control cabinet with overload protection

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Dkodeygv Uispfx Adror

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Dkodpfew R Un Aox Adrer Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Dsdpfx Adozpxdwjrjkr Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Controlled B-axis: -15° to +90° Tool holder: SK 40 Number of tool magazine slots: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle operating hours: 50,033 h EQUIPMENT Coolant system Dksdozpw Iuepfx Adror

Condition: new, T-dies for Bystronic/Amada Dkedjkvlxhspfx Adrer

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate Dsdpfxsy Tylge Adrskr radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 20497- Tyres 12.00R20, axle configuration: 6x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 550 l, color: white, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, EBS, cruise control, electric window regulation, fog lights, = Additional options and accessories = - Sun visor = Remarks = Cabin type: All Time (sleeper cabin) Country of origin: Spain Displacement: 9,000cc Dimension: 9,100 x 2,550 x 3,100 Ground clearance: Front - 337 Rear - 311 Brakes: Drum Brakes (Front/Rear) Steering: LH Drive Construction: Chassis Gearbox type: TX-16M Type: AT380T43H Colour: 50105- White IC 194 Shipping Dimension: 8.3x2.55x3.10 m Chassis Length: 5.8 meters approx Provision Radio Dab Orlandi Tow Hook Towing Version Eco-roll Loads 7500-13000-13000kg Drive tire 12.00R20 FMS Data interface Batteries 220Ah Rear dampers Reverse Buzzer Cross member D=200 KN 7+7 Pin trailer plug Automatic 45mm D=200 KN Front multileaf susp Wheel chocks (2) Headlight protection Rear Overhang 1990mm Pneum. Horn-Chassis Curtains on door windows Standard gear mode 08329 Steel front bumper Front anti-roll bar Rear multileaf susp Tyre inflation hose Vin code check digit Warning triangle Del. Heated screen Radice VIN WJM STD setting C11/C13 Safety Hor. Filter Cartridge Horizontal Air Filter 630cc Air Compressor Steel Air Tank Alternator 90A/24V APU Free discharge Horiz batt side fram Standard gray plastic part Mechanical cab suspension Manual cab tilting At low roof cab Del. package tray Temperature countries preparation With door sticker (IT03-EN) Fabric air susp driver seat Dkjdsy Tyhzjpfx Adrjr Ecoswitch Limitation on SL Lower exhaust pipe Engine Speed 1900rpm Del. Front underrun protection S disp oper ped post Grey IC444 chassis Standard cab trim Speed limiter 90km/h Soft touch foam steering wheel MPH/KPH Speedometer Pre-heater Trattam. = More information = Tyre size: 20497- Tyres 12.00R20 Suspension: leaf suspension Empty weight: 9.000 kg Carrying capacity: 24.500 kg GVW: 33.500 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 13R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: air conditioning, cruise control, trailer coupling, = Additional options and accessories = - Immobiliser - Sun visor = Remarks = Cabin type: Active Time - Sleeper Country of origin: SPAIN Dedey Tyfyjpfx Adrskr Displacement: 12,900cc Dimension: 9,100 x 2,550 x 3,100 Brakes: Disc Brakes (Front/Rear) Steering: LH Drive Construction: Chassis Type: AT380T47H - SG64 Chassis Length: 6.56m Shipping Dimension: L 9.1 x W 2.55 x H 3.1m Capacity Liters: 290L Rear Axle: HR-TP Colour: 50105- White IC 194 Rear Overhang 1990mm FMS Data Interface Rear Multi Leaf spring 13 leaps Front Reinforced parabolic suspension Load 9000-32000 Rear Axle Ratio 4.67 Drive Tire 325/95R24 Electronic Brake System + Brake Assist System Safety Hor. Filter Cartridge Horizontal Air Filter 630cc air compressor Standard air tank plating Steel Air tanks 90A alternator Air processing unit free discharge Horizontal battery positioned on side frame Standar Grey Plastic Part Mechanical Cab Suspension At low roof cab Roof in standard color Standard reverse STD temp climate Fabric air susp driver seat Lower Exhaust Pipe Engine Speed 1900 RPM Steel front bumper Front Anti Roll Bar Rear Anti Roll Bar Logistic Mode Off Bulb Rear Light Mechanical Battery Switch Fabric sta 2 way Adj pass PTO pre-equipment Expansion Module Engine Plate Radiator Guard Provision Radio and CB Cross member D 120 KN Revere Monotone Buzzer Steel Wheels Grey IC44 Chassis Standard Equipment MPH/KPH Speedometer Soft Touch Steering wheel Pre Heater Tyre Inflation Hose VIN Code check digit Warning Triangle Radice VIN WJM STD setting c11/c13 1 bunk without protection net Pre filter high performance transparent ZF 16S 2520 TO GBOX Standard H Lamps Electronic Horn Plates in ECC Language Jacking Equipment = More information = Tyre size: 13R22.5 Suspension: leaf suspension GVW: 41.000 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 12.00R20, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - LED headlights - Spare wheel - Sun visor = Remarks = Cabin type: Sleeper - Active Time Country of origin: SPAIN Displacement: 12,900cc Gcw: 120 Tons Brakes: Drum , Air Dual circuit Steering: LH Construction: Tractor Head Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 Dedoy Tydvjpfx Adrokr 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar = More information = Tyre size: 12.00R20 Number of cylinders: 6 Engine capacity: 12.900 cc Empty weight: 9.980 kg

Condition: good (used), Year of construction: 2009, ENGEL Emotion 440/100T Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Dksdpfxoyktp Se Adrer Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Nozzle contact force: 40 kN

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Dkedpfxjxyi Rvo Adrjr Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: excellent (used), Year of construction: 2015, Engel VIPER 20 (2015) X axis demolding stroke - 700 mm Y axis traverse stroke - 1500 mm Dkedoxy Rarspfx Adrer Z axis traverse stroke - 2360 mm X axis reach from fixed platen - 925 mm C axis pneumatic swivel axis - yes Nominal payload - 25 kg IMM clamping force - 55-340 US tons

Condition: good (used), Year of construction: 2015, Moretto XD2 TS Mini Dryer – Technical Parameters (copy-friendly) Drying temperature (max): 180 °C / 356 °F Air flow: 3–10 Nm³/h (1.7–5.9 cfm) Hopper capacity: 15 dm³ (0.53 cft) Material capacity (bulk density 0.65 kg/dm³): 9.7 kg (21.4 lb) Total power: 1 kW (1.3 HP) Average energy consumption at 80 °C: 0.062–0.206 kWh Average energy consumption at 176 °F: 0.083–0.276 HP/h Power supply: 230 V / 1 phase / 50 Hz Dimensions & weight A: 409 mm B: 334 mm H: 591 mm H1: 556 mm Dkjdpfx Adeyfhyuersr d: Ø 9 mm D: Ø 50 mm F1: 180 mm d1 (mounting): 4 × M6 I: 100 mm F: 120 mm Weight: 13 kg

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Djdeyg Eu Sspfx Adrskr Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Year of construction: 2015, condition: used, Moretto DGM 120 S (2015) Gravimetric mixers (GRAVIX Series) These are robust, multi-component systems. In the photos you can see the characteristic funnels for the various components that the system weighs with extreme precision. The Moretto DGM Gravix 120 S dosing system belongs to the middle category of gravimetric dosing machines, which are characterized by extreme precision and resistance to industrial vibrations. Dksdpfx Aey Udkcodror -electrical data: 230V; 50/60Hz; 1kW -weight: 9,35 kg Main technical parameters This model is designed for precise mixing of multiple components directly at the machine neck. • Maximum performance: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001% thanks to the technology of weighing each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (with the possibility of expansion according to the version). • Response speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weighing hopper volume: Optimized for medium-sized batches with free suspension without mechanical interference. _____ Key technologies • VIS (Vibration Immunity System): Allows installation directly on injection molding machines or blow molding machines without loss of accuracy due to machine movement. • Rotopulse: Special device for micro-dosing of additives (from 0.08 g), which prevents the formation of domes in the material. • Double-Effect Mixer: Hemispherical mixing chamber ensures a perfectly homogeneous mixture without "dead spots". • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet or Modbus

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Dkodpfxeyyz Dde Adrer Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, MB Conveyors PA ALL Ligth conveyor (2015) Dodjyf Nacopfx Adrskr L=205cm W=50cm H=110cm(adjustable)