Engel e-motion 440H/440H/160 T combi (2016) only 13.000 hours

Engel e-motion 440H/440H/160 T combi

Condition: excellent (used), Year of construction: 2004, Engel Victory 80/45 Tech Closing force: 45 tons, without core Screw diameter: 22 mm Year of manufacture: 2004 Gjdpfxjh Rawbj Al Aoiw Control unit: 200

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s Gedpfx Aloy N Sqme Aeiw • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: new, machine/vehicle number: 1900040028, conveyor belt length: 1,700 mm, conveyor belt width: 440 mm, conveyor belt speed: 57 mm/s, power: 0.18 kW (0.24 HP), input voltage: 230 V, input frequency: 50 Hz, Conveyor belt in front 1,700 x 440 mm Giodpfxotv E Die Al Aew FDA compliant

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Giodpfxotk N E To Al Ajw Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: excellent (used), Year of construction: 2007, Wanner C13.20 SV Slow Mill Year of production -2007 Power: 2.2 kW Giedpfxjw D R Hpo Al Aow Description: Rotor knives: 9 Stator knives: 2 Rotor Ø: 130 mm Rotor width: 200 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 Gisdpfxouggb Dj Al Aew SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Godpeyk E Srofx Al Ajiw

Condition: used, Year of construction: 2014, No. 01 Homag Weeke machining center Mod. BMG 111/45/12/K Usable working area with electrospindle 4500 x 1550 mm Usable working area with all units 4500 x 1250 mm Boring head with 12 vertical spindles and 4 + 2 horizontal spindles, saw unit 0/90 Electrospindle 9 kW 12 Hp HSK, rotation speed from 1250 to 24000 rpm 4th axis for aggregate rotation 8-position circular tool changer 8-position lateral tool changer Lateral pick-up tool changer Special FLEX 5 HIGH PERFORMANCE unit for drilling, milling, cutting Automatic tilt adjustment 0 – 100 degrees Chip conveyor discharge to the right Giodpfsyarwtox Al Ajw 8 Schmalz work tables, 16 suction cups Suction cup positioning laser 2 vacuum pumps POWERTOUCH control system Woodwop dxf import Teleservicenet assistance CE compliant Year 2014

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Giodpox I Rqcsfx Al Aow

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Godpfx Ajyngzvol Aeiw Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20