Used High-Pressure Standpipe for sale (31,153)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Knodoflpmqepfx Afdob Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in cleaning unit on hot-dip galvanized and painted high-quality steel frame with forklift attachments, suitable for installation in service vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min. at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min. at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min. at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min. at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 650 x 1,000 x 1,030 mm Empty weight without water tank: approx. 250 kg Dimensions and empty weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm and approx. 280 kg Dimensions and empty weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm and approx. 300 kg HIGH-PRESSURE PUMP:  Manufacturer: COMET  Model: TW 13022S Premium ENGINE:  Manufacturer: Honda  Model: GX 690  Fuel: Gasoline  Cooling: Air  Cylinders: 2  Displacement: 688 cm³  Max. Power: 24 hp (17.7 kW)  Max. Engine Speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL:  Ignition key  Operating hour counter  Electronic fuel gauge  LED indicator for low lubricating oil pressure  Emergency stop button INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shutdown function. Knodpfxjdqmttj Afdob SAFETY AND PRESSURE RELIEF VALVES:  The unit is equipped with a safety valve, a pressure relief valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 60 m ½“ high-pressure hose  Hose: 50 m ½“ high-pressure hose (Included) LOW-PRESSURE WATER FEED HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (Included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration rating: 50 Mesh INCLUDED IN DELIVERY:  Multifunctional radio remote control IMET; - Engine on / off; - Bypass on / off; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  300, 400 or 500 l water tank made of polyethylene; OPTIONAL (UPON REQUEST):  60 m ½“ high-pressure hose;  Pulsation/booster pump;  2nd high-pressure hose reel  Electric high-pressure hose reel (connection to the vehicle battery required) ACCESSORIES (UPON REQUEST):  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat spray nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispensing kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories upon request

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins - Rotating plate Kedpfxsd Amwis Afdjnb Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg Good condition

Condition: new, operating pressure: 275 bar, pressure: 275 bar, overall weight: 71 kg, PROFESSIONAL PETROL PRESSURE WASHER WITH BRASS PUMP – TECHKAR "G275" MODEL Operating parameters: 275 bar, 15 l/min Product Description: We offer a professional petrol-powered pressure washer featuring a robust yet compact design and large pneumatic tires, ensuring convenient, efficient, and safe transport to locations where standard electric washers cannot be used. Thanks to its petrol engine and a pump capable of self-priming water from tanks, this unit operates independently of mains electricity and water supplies. It is ideally suited for various outdoor tasks, such as work on allotment gardens. High performance specifications—specifically a maximum pressure of 275 bar and a flow rate of 15 l/min—enable it to handle the vast majority of tasks required of pressure washers. Utilizing standard fittings (M22 thread and standard petrol washer quick-connectors), the unit can be expanded with a wide range of accessories, including brushes, lances, turbo nozzles, sandblasting kits, sludge removers, and T-Racer surface cleaners. The brass pump, equipped with a pressure regulation valve and a safety valve, ensures exceptional durability even under heavy workloads. We are the direct importer of TECHKAR "G275" pressure washers and maintain a continuous stock of service parts (pressure valves, pistons, seals, by-pass valve repair kits) and accessories (such as T-Racer patio cleaners, rotary nozzles, hoses, foam cannons, etc.). When you choose our product, you benefit from comprehensive service and post-warranty support. About the LIFAN brand: Lifan is one of the world's largest automotive companies. The enterprise manufactures motorcycles, passenger cars, trucks, and buses, as well as internal combustion engines and machinery. Founded in 1992, the company is headquartered in Chongqing. It successfully sells its products in highly developed nations—such as the UK, Germany, Australia, the USA, and Canada—where it enjoys an excellent reputation. Set contents: LIFAN 15 HP combustion engine Brass pump head Knsdpfez Dv Tcox Afdeb 15m steel-braided hose with 3/8" quick-connectors High-pressure gun with 3/8" quick-connector Spray lance with quick-connector 0° point-jet nozzle 15° fan-jet nozzle 40° fan-jet nozzle Chemical application nozzle Garden hose quick-connector with metal pre-filter Honda oil supply (2 x 0.6L) Features and benefits: Brass pump head Crankshaft pump, 3-piston design Ceramic plungers Robust intake and discharge valves Thermal safety valve Chemical intake valve with hose and filter Additional BY-PASS pressure regulation valve Water connection for standard garden hose coupling Cover with oil drain opening Cover with built-in oil level sight glass Large pneumatic wheels Sturdy frame Technical specifications: Engine: LIFAN 15 HP combustion engine Starting system: Manual (recoil) Fuel consumption: ≤ 374 g/kWh Fuel tank: 6.5L Fuel type: Gasoline Pump head type: Brass, crankshaft-driven Intake/discharge pump: Yes Working pressure: 275 bar (4000 PSI) Maximum pressure: 300 bar (4400 PSI) Flow rate: 15 l/min (900 l/h) Weight: 71 kg Engine oil: SAE 10W30 Pump oil: SAE 15W40 Condition – new

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections Knodpfez Dhrqsx Afdeb * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, Movichrom high pressure pump - G 3/5 PN25 G2 Knedpfxof S Nche Afdjb -Drive: 0.75 kW -Speed: 2810 rpm -max. delivery rate: 3 m³/h -max. head: 33 m -Dimensions: 220/250/H580 mm -Weight: 34 kg

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 4-axis machine Kedpfxez D Dbhs Afdjnb X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle

Condition: used, High-pressure hydraulic power unit up to 630 bar, WEBER Type E45 / 59600.0 High-pressure unit + hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic power unit, Type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Knodpjdzp S Rofx Afdjb Spreader – jaws, WEBER Type SP30 / 59 198.0 Outreach = arm length 340 mm Spreading distance max. 610 mm Spreading force in the working area max. 132 kN Closing force 99 kN - Double hose with plug-in connection Rated power 0.9 kW Mains connection 220 volts, 50 Hz Weight of hydraulic power unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Hydraulic fire and rescue set with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. It can also be used to compress or lift loads. Versatile due to the multifunctional spreader jaws made of die-forged and hardened steel.

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner Knsdpfx Afoz Duf Redsb -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Kjdpsfz Ax Sjfx Afdenb User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29,6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Knjdpfx Afsz Aiyvsdjb Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Knedpfx Afez Ai R Usdsb Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29,6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M Kjdpfx Aod Nnb Rofdenb 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 800 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, Kärcher HDS 695 S Eco Hot Water Pressure Washer New heating coil The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 800 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.9 Detergent tank [l]: 20 Kedsz Ainmspfx Afdsnb Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER Ksdpfsw Icn Sjx Afdenb STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Year of construction: 2020, condition: new, PLC microprocessor control Knodsfz Dvvopfx Afdeb • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Kodpfx Afezzlc Rodsnb Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Knedpfjzxhmtsx Afdob Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, input voltage: 400 V, overall weight: 121 kg, warranty duration: 6 months, temperature: 90 °C, Kärcher HDS 9/17-4C Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head featuring new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are buying the exact machine shown in the pictures. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 90 Connected load [kW]: 6.5 Fuel tank [l]: 25 Hose length [m]: 10 Weight [kg]: 121 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE Knodpfx Ajz Ayn Djfdsb KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10 mm, input voltage: 400 V, overall weight: 130 kg, warranty duration: 6 months, temperature: 80 °C, Kärcher HDS 850-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 80 Connected load [kW]: 6.5 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance Kedpfoz Ar R Rex Afdonb NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and scale buildup inside the heating coil and other lines.

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 TR TECHNICAL DATA: Model: KRANZLE THERM 1017 TR Manufacturer: KRANZLE Country of manufacture: Germany Knsdpfxey R Tfho Afdeb Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 198 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1017 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m professional-grade pressure hose WHY CHOOSE THE KRANZLE THERM 1017 TR? The THERM 1017 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose, a reel, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Year of construction: 1979, condition: used, machine/vehicle number: 79-207, jaw width: 125 mm Knjdpfxo Avhdj Afdsb jaw height: 42 mm span width: 202 mm

Condition: good (used), machine/vehicle number: 897, Jaw width: 160 mm Jaw height: 50 mm Span: 280 mm Ksdpfeb Dimvex Afdsnb Overall height: 130 mm

Year of construction: 2017, operating hours: 7,500 h, condition: excellent (used), functionality: fully functional, Manufacturer: MAZAK Model: VARIAXIS J-600 Year: 2017 Control unit: Smooth X X-axis travel: 850 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle connection: DIN-69871 Tool magazine capacity: 30 Maximum spindle speed for milling: 12,000 rpm Knedpfx Asz Dt I Rofdjb Maximum workpiece dimensions: 730 mm Maximum workpiece height: 450 mm 5-axis continuous operation: Yes Spindle power: 11 kW Table size: 600 x 500 mm High-pressure coolant system through the spindle: 20 bar B-axis travel: -120 / +90 Maximum workpiece weight (spindle): 500 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, Manufacturer: MAZAK Model: VTC-820/20 HD Year: 2017 Table size: 2500 x 820 mm X-axis travel: 2000 mm Y-axis travel: 820 mm Z-axis travel: 860 mm Control unit: Smooth G Knodjz Dt E Nepfx Afdob Spindle connection: Din-69871 Tool magazine capacity (automatic tool changer): 36 Chip conveyor: Yes, belt type High-pressure system through the spindle: 20 bar Spindle power (milling): 30 Kw Spindle speed (milling): 10,000 rpm Renishaw system: Yes, complete Automatic tool presetting: Yes, complete