Used Hyster S 1.0 for sale (69,226)

Condition: new, SEW Eurodrive R17F DRS71M4 / TH gearbox motor, serial number: 01.1736146301.0006.11, unused, 100% functional, scope of delivery as shown in the photos. Hfedoi D N Ruopfx Aflsk

Condition: ready for operation (used), Bosch SD-B4.180.020-01.000 servo motor, serial number: 845000135, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hjdpoi D E Umofx Afljfk

Condition: ready for operation (used), Bosch SD-A4.140.020-01.000, brushless, permanent magnet synchronous servomotor, serial no. 444000207, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Hedpoi D E R Refx Aflofk

Condition: ready for operation (used), Bosch speedometer for SD-B 4.140.020-01.010 permanent magnet servo motor, used, in good condition, 100% functional, scope of delivery as per photos, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Hedpfx Ajrlxrpeflefk

Condition: used, Milling units for rounding on edge-banding machines, or milling motors, including top/bottom or left/right radius cutters, Perske type KNS 21 05/2. Hjdpjzrxu Iefx Aflefk Removed from a fully functional machine but untested.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Lifting capacity: 20kg Reach: 1726mm Hfodpfx Afor Aka Aelek

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Hedpfx Afjzt N R Nsljfk

Condition: good (used), Year of construction: 1995, fuel type: electric, Manufacturer: Hyster Tip: E 3,20 XM lifting capacity: 3200 kg Hsdpjlz Nbpofx Aflefk lifting height: 3700 mm Fork length: 1200 mm

Year of construction: 1995, condition: ready for operation (used), There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. Hedpfx Ajipv D Ueflofk

Condition: not inspected (used), Year of construction: 2008, operating hours: 33,600 h, Used Hyster H7.0 FT gas forklift, year of manufacture 2008. Hfedezt Svbjpfx Aflek

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Hfsdpovvkmbsfx Aflek Storage location: Nattheim

Condition: used, Year of construction: 2016, operating hours: 7,047 h, Type of fuel: Electric Colour: Yellow Empty weight: 3.730 kg Dimensions (LxBxH): 210 x 115 x 310 cm Lifting capacity: 1.800 kg Lift height: 493 cm Fork dimensions: 1.000 x 950 mm - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: K160B09011P - Operating hours: 7047 - Lifting capacity: 1800kg - Lifting height: 4930mm - Overhead clearance: 3100mm - Free lift: 0mm - Fork length: 1000mm - Maximum fork width: 950mm Hodpfx Asyvfxpefljfk - Minimum fork width: 0mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: R&W 24/6 PzSH 750 - └ Capacity: 750Ah - └ Battery voltage: 48V - └ Battery test result: 55% - Transport dimensions: 2100mm x 1150mm x 3100mm (l x w x h) - Transport weight [kg]: 3730kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2013, lifting height: 4,890 mm, free lift: 1,060 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 990 mm, total height: 2,130 mm, total length: 3,350 mm, total width: 1,100 mm, color: yellow, Empty weight: 4.840 kg Lifting capacity: 2.500 kg Hodpfjzhr Adex Aflefk - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: A276B040475L - Lifting capacity: 2500kg - Lifting height: 4890mm - Overhead clearance: 2130mm - Free lift: 1060mm - Fork length: 1200mm - Maximum fork width: 990mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Air tires, Half cabin, Free-lift, Joystick, Work lights - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 4 PZS 620 - └ Battery year of construction: 2013 - └ Capacity: 620Ah - └ Battery voltage: 80V - └ Tray length [mm]: 1020 - └ Tray width [mm]: 700 - └ Tray height [mm]: 740 - Transport dimensions: 3350mm x 1108mm x 2130mm (l x w x h) - Transport weight [kg]: 4840kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2016, operating hours: 16,040 h, lifting height: 3,770 mm, fuel type: electric, mast type: duplex, fork length: 1,070 mm, fork width: 1,050 mm, total height: 2,360 mm, total length: 2,450 mm, total width: 1,170 mm, color: white, Empty weight: 5.510 kg Lifting capacity: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Hjdpfxozrmfzo Afljfk - Serial number: A276B07325P - Operating hours: 16040 - Lifting capacity: 2500kg - Lifting height: 3769mm - Overhead clearance: 2360mm - Fork length: 1070mm - Maximum fork width: 1050mm - Minimum fork width: 160mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage - Options: Work lights, Joystick - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: PzS 775 - └ Capacity: 775Ah - └ Battery voltage: 80V - Transport dimensions: 2450mm x 1173mm x 2360mm (l x w x h) - Transport weight [kg]: 5510kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2002, operating hours: 10,720 h, lifting height: 3,460 mm, fuel type: electric, mast type: duplex, fork length: 1,660 mm, fork width: 1,010 mm, total height: 2,440 mm, total length: 2,800 mm, total width: 1,420 mm, color: yellow, Empty weight: 8.856 kg Lifting capacity: 5.500 kg - Year: 2002 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: C098N0226Z - Operating hours: 10720 - Lifting capacity: 5500kg - Lifting height: 3460mm - Overhead clearance: 2430mm - Free lift: 0mm - Fork length: 1660mm - Maximum fork width: 1010mm - Minimum fork width: 310mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 18/10MBS55 - └ Capacity: 550Ah - └ Battery voltage: 36V Hedpfx Afoywux Nslsfk - Transport dimensions: 2800mm x 1420mm x 2440mm (l x w x h) - Transport weight [kg]: 8856kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, mileage: 100 km, power: 137 kW (186.27 HP), color: red, gearing type: automatic, loading space length: 61,500 mm, loading space width: 25,500 mm, loading space height: 26,000 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Iveco Eurocargo ML75E19/P 4x2 box van with tail lift. Hfedpfjy Svrmsx Aflsk ZF 8AP800 automatic gearbox, emission standard EURO VI E, engine speed 2200, parameter 2350, steel rims, speed limiter 90 km/h, tires 225/75R17.5, manually operated cab tilting mechanism, front headlights halogen, standard cab in flat-roof design, cab rear wall without window, towing and recovery eye front, fog lights, chassis frame in grey, rearview mirrors for body width 2600 mm, first aid kit, plastic bumpers, cab components in black, sun visor transparent, installed on the outside of the cab roof, model year 2024, windshield unheated, IVECO logo gunmetal grey, exterior mirrors electrically adjustable and heated, flat roof painted in cab color, electronic immobilizer and 2nd vehicle key, clothes rail on cab rear wall including adjustable hook, preparation for toll system (OBU), including antenna and wiring on the dashboard without receiver, rear axle ratio: 3.58, COC certificate of conformity, sunblind for side window, driver and passenger side, armrest right on driver's seat, adjustable in inclination, driver's seat luxury, air-suspended, heated, multi-adjustable, armrest right (not for Eurocargo), lumbar support and headrest, with integrated 3-point safety belt, storage compartment on engine tunnel in 2-seat configuration, foldable, cab interior lining with fabric cover, air conditioning with manual control, plastic steering wheel with function buttons for radio, telephone, cruise control and menu navigation, VIN: manufacturer index ZCF, digital tachograph 4.1, passenger seat comfort, 4-way adjustable, air-suspended, integrated headrest and integrated 3-point safety belt, electrical preparation for loading area light, batteries 143 Ah, recommended for tail lift and auxiliary drive operation, exhaust pipe centrally under the vehicle, air suspension on rear axle, parabolic spring on front axle, total weight 7,490 kg (weight variant, front axle: 3,600 kg / rear axle: 5,200 kg), air filter unit under cab, electrical preparation for tail lift operation according to VEHH standard, wheel chocks, 2 pieces, air compressor 360 ccm, recommended for trailer operation with continuous braking system, signs for air tank standard, generator 2880 watts (24 volts x 120 amps), left-hand drive for right-hand traffic, air tank in aluminum design, number depends on suspension version and trailer version, design temperate climate, design standard, vehicle badge standard, engine intake air heater for optimal cold start behavior at extreme temperatures, NOISE ECE 51/03, weight variant front axle: 3,600 kg /, rear axle: 5,200 kg, raw air intake without snorkel, jack, air dryer for braking system, heated, C-profile steel ladder frame, chassis protection coating Tectyl 300 G Clear, type plate 75E, position of components on the chassis in standard design, omission of underrun protection at the rear, heater for AdBlue tank, rear cross member, D-value: 70 kN, not suitable for central axle trailers (except 75 E), fuel tank 120 liters, plastic, lockable, fuel pre-filter on frame, heated, AdBlue tank, 30 liters, transmission mode standard, connectivity box 4G incl. TCO service contract, radio with Bluetooth, DAB+ and 7-inch display, tire pressure monitoring system (TPMS) sensors.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,097 h, load capacity: 12,000 kg, lifting height: 3,130 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 2,500 mm, fork length: 2,250 mm, empty load weight: 18,270 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,450 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 75 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Hfedpfx Aezqhhneflok Front tire size: 10.00-20 Rear tire type: Superelastic Rear tire size: 10.00-20 Description: In addition to this Hyster model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this H12XM-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Side shift, fork positioner Fork positioner opening range: 610 / 2350 mm Heater, full cabin

Condition: good (used), machine/vehicle number: 21906, Year of construction: 2017, load capacity: 9,000 kg, lifting height: 4,650 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,440 mm, total length: 4,260 mm, total width: 2,500 mm, operation weight: 13,340 kg, additional equipment features: Rear mud guards, Warning triangle, Dual tread, Front mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 10.00 - 20 Wheel size – Steering wheel: 10.00 - 20 Hfjdpfoyuhlisx Aflsk

Condition: used, Year of construction: 2011, operating hours: 1,218 h, lifting height: 3,300 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H2.5FT diesel forklift, year of manufacture: 2011, hours: only 1,218!, previous owner: German Armed Forces, rated load capacity: 2,500 kg, lift height: 3,300 mm, duplex mast, fork length: 1,200 mm, fork extension: 1,800 mm, diesel engine [36 kW/48 hp], weight: 4,180 kg, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cabin Hedozurknjpfx Afljfk = Further information = Lifting capacity: 2,500 kg Overall height: 220 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2013, operating hours: 948 h, lifting height: 3,300 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H2.5FT diesel forklift, year of manufacture: 2013, hours: only 948!, previous owner: German Armed Forces, rated load capacity: 2,500 kg, lift height: 3,300 mm, duplex mast, fork length: 1,800 mm, scale: Drexel DI 47 with printer, diesel engine [34 kW/46 HP], weight: 4,160 kg, ready for immediate use! Hfjdszurkbepfx Aflek Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cabin = Further information = Lifting capacity: 2,500 kg Overall height: 220 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2011, operating hours: 1,163 h, lifting height: 3,300 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H2.5FT diesel forklift, year of manufacture: 2011, hours: only 1,163!, previous owner: German Armed Forces, rated load capacity: 2,500 kg, lift height: 3,300 mm, duplex mast, fork length: 1,800 mm, diesel engine [36 kW/48 hp], weight: 4,180 kg, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Subject to errors and prior sale! Cabin = Further information = Hjdpfx Aezuriqsflefk Lifting capacity: 2,500 kg Overall height: 220 cm Please contact Tobias Ebert for more information.

Condition: used, mileage: 22,937 km, power: 118 kW (160.44 HP), color: white, gearing type: mechanical, loading space length: 60,900 mm, loading space width: 25,000 mm, loading space height: 23,700 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, power assisted steering, For inquiries regarding the vehicle, Mr. Seidel is at your service (available by phone at …). Iveco Eurocargo ML75E16 box van with tail lift. Hodpfozurhyjx Afljfk Features include: electric windows, air conditioning, central locking, air suspension seat, Bluetooth, USB, radio, cruise control, engine brake, lane keeping assist, ABS/ESP/ASR, heated exterior mirrors, electrically adjustable exterior mirrors, differential lock, halogen headlights, daytime running lights. Cargo area dimensions: length: 6,090 mm, width: 2,500 mm, height: 2,370 mm. Tire tread: 1st axle 12 mm, 2nd axle 13 mm. Permissible total weight: 7,500 kg, unladen weight: 5,090 kg, payload: 2,410 kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. …) will be happy to assist you. Further information can be found on our website. … Errors, changes, and prior sale are reserved!!! ESP, particulate filter = Further information = Engine displacement: 4,485 cc GVW: 7,500 kg Please contact Tobias Ebert for further information.

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Hsdpfx Aowfg E Doflsfk

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Hfedpfxewqqv Do Aflok

Condition: excellent (used), We offer a professional Hyfra Chilly 08/1-S cooling unit, designed for cooling machines, industrial equipment, lasers, welding machines, and other systems requiring stable liquid temperatures. Hodpozmdtfjfx Aflsfk The unit is fully functional, tested, and ready for operation. During testing, it reaches a temperature of 8.3°C, which confirms the correct operation of the cooling system (as shown in the picture). Technical specifications: * Manufacturer: Hyfra GmbH * Model: Chilly 08/1-S * Year of manufacture: 2006 * Cooling capacity: 890 W (at 37°C) * Refrigerant: R407C * Refrigerant quantity: 0.67 kg * Power supply: 230 V / 50 Hz * Max. current draw: 5.10 A * Connected power: 1.20 kW * Max. operating pressure: 29.5 bar * Max. ambient temperature: +42°C * Unit weight: 49 kg * Weight with water: 67 kg Condition: * Used. * Technically sound. * Normal signs of use visible on the housing. * Equipped with a water filter, liquid level indicator, pressure gauge, and quick couplings. It is ideally suited for industrial applications, laboratories, and anywhere efficient and reliable water cooling is required.