Used Ipetronik Iso Voltage Divider for sale (14,268)

Condition: good (used), The scope of delivery includes: 1x partition panel, used Material color: gray-white Overall length: approx. 775 mm Lrsdpfxoi Eu Dvo Ai Hjr Tube length: 650 mm + 5 mm plastic cap Cross-section: square tube 20 x 20 mm Opening dimension: approx. 103 mm Weight: 0.93 kg | per piece

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the compartment divider: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf traverses Frame depth: 400 mm Lrodpopbvvtsfx Ai Hsr Included in delivery 01x shelf divider, II. choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm useful length: approx. 315 mm total width: approx. 100 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,170 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), shelf length: 5,330 mm, shelf height: 2,278 mm, Technical data for the shelving rack: Racking system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rack rows: 01 unit Rack length: approx. 5,330 mm Number of bays per row: 04 units of 1,295 mm each Number of levels incl. dividers: 04 units Number of levels plus base level: 02 units Lrsdpfx Asw H Sk Hsi Hor Scope of delivery includes: 05x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including horizontal bracing and foot plates Uprights are pre-assembled 2,278 mm high 800 mm deep 24x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,295 x 790 x 40 mm Weight per unit: approx. 12.82 kg 48x Free-standing dividers, used Total depth: 765 mm For upright depth: 800 mm Total height: 315 mm Usable height: 275 mm Material finish: Sendzimir galvanized 02x Cross bracing, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load sign With specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply. These can be requested from us separately, depending on the delivery location and scope.

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration Ui: 800 V Uimp: 8 kV 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Lrsdpfx Aiszlii Ns Hsr Labelled outgoing circuits Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Condition: good (used), Tool trolley with inserts Lrsdpfxozhi Tmo Ai Her with turning holder for NC lathe, Shaft: 50 mm

Condition: good (used), empty load weight: 350 kg, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, DGUV certified until: 06/2027, Weighing dough divider Rheon Model: Stress Free Divider VS - VX 021 Weighing dough divider in stainless steel design Weight range approx. 200 to 1200 g Hopper capacity approx. 80 kg For doughs with high tolerance to acidic conditions Touchscreen control Machine is mobile Belt and band scale Connection 400V, 16A CEE plug Used machine Lrodpfx Aist D Tm Ae Her Other dough dividers in stock!

Condition: good (used), Compartment divider, SSI Schäfer R3000, TRF 4510 for shelves 0.50m deep - second-hand - : = Price per piece ex location: 2.-€ (net), dismantled, packed and loaded! Minimum purchase: 100 pieces Manufacturer: SSI Schäfer Series: R3000 Type: TRF 4510 Year of manufacture: unknown For shelves Dimensions: approx. 1m x 0.50m For shelves 40mm high Version with plastic plugs Lodpfx Asqmnc Usi Hsrr Partition height: 10cm Condition: good Available: from approx. beginning of December 2023 Location: Munich

Condition: excellent (used), 363 USED Fortuna KM Automatic Roll Divider and Rounder. Lsdpfx Aioy Amc Ro Hjrr TECHNICAL DATA: - Dividing and rounding range: 35-80 g. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). Lsdpod Erdrofx Ai Horr The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: reconditioned (used), Fortuna A 3 automatic divider - divides into 30 portions - recently refurbished - 2 working trays - weight range 30-90 g - power supply 3 x 400 V - weight approx. 650 kg - 6-month warranty - delivery time up to 7 days - collection from warehouse/shipping option available Lredpfxezc Hwas Ai Hor - price upon request

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. For DECKEL milling machines Lrjdshvz Iiopfx Ai Hor FP1 - FP2 - FP3 - FP4 Individual sales upon request.

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 430 mm, feed length Y-axis: 410 mm, feed length Z-axis: 360 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total height: 2,000 mm, total width: 1,475 mm, total length: 1,700 mm, table width: 320 mm, table length: 800 mm, overall weight: 1,650 kg, Universal Milling Machine FNF 32. Year of production: 1995 (FOP AVIA Poland) Ljdpjxnynbjfx Ai Herr Specifications: Horizontal worktable: 320 x 800 mm. Vertical worktable: 320 x 900 mm. Spindle taper: ISO 40. Swiveling head: +60; 0; -60 degrees. Hydraulic tool clamping. Travel: X – 430 mm, Y – 410 mm, Z – 360 mm, Spindle speed "1": 50–315 rpm, Spindle speed "2": 400–2500 rpm, Main motor power: 4 kW. Power requirement: 5 kW. Dimensions (L x W x H): 1700 x 1475 x 2000 mm. Weight: 1650 kg.

Condition: refurbished (used), Year of construction: 1998, WP Parta ST dough divider 1-pocket type 1500 year of build 1998 weight range 200 – 1700 grams Ledpfx Aiswgw Eqs Hjrr max. capacity 1215 pcs/h

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit Lsdsd Dc Unopfx Ai Hsrr ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Condition: used, 4 pieces of container wheels for ISO containers, container chassis Container castors, set of wheels for sea containers Lrsdpfx Asxp R Hdsi Her Manufacturer: presumably HAACON Total load capacity: approx. 24 tonnes Load capacity per piece: approx. 6 tonnes Wheel diameter: 360 mm Individual wheel width: 100 mm Total wheel width: 220 mm Height with container mount / clearance height: 540 mm Height to container support: 520 mm - Container locking mechanism for securing on the container corners - WICKE heavy-duty castors, heavy-duty cast rim with polyurethane coating, type 315/160 - Chassis steerable, can be locked with pin in 90° holes - 2 wheels per chassis - Ideally suited for moving containers on solid surfaces (e.g. factory floors) - without brake - without steering bar Weight per piece: 115 kg Total weight (4 pieces): 460 kg Very good condition

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Lodpfxex A Imze Ai Herr Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever Lrodpjxf Uytefx Ai Hor - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine 2 years warranty Available in 4 different versions, cutting heads can also be replaced Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for quick floor sweeping + dividing knives made of stainless steel + quickly replaceable, coated cutting head + up to 4 different cutting heads can be used with one machine + extremely wide weight range (16 g - 400 g possible!) + even division of the dough, excellent rounding of the dough pieces + rounding function can be switched off by pressing a button + ergonomic knife cleaning position (head can be swiveled forward by 90 degrees) Lrjdpfxeivdm Uo Ai Her + rounding function, pressing time and rounding duration can be programmed + digital display, 10 programs can be saved + easy and quick adjustment of the rounding chamber height + side holder for rounding plates, readily accessible STANDARD accessories: 3 rounding plates included General technical data: Power: 1.3 kW Connection values: 400V - 3-phase - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (W x D x H) Net weight: 380 kg Size 3-52: Number of pieces: 52 dough pieces Weight per piece: 16 - 45 grams (depending on the dough) Dough input: 832 - 2,340 grams (depending on the dough) Optionally available: - additional rounding plates Surcharge: 115,-- € net / piece - additional cutting head (including 3 rounding plates) Surcharge: 1,840,-- € net / set

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Ljdpfx Aisivdngo Hjrr Features: + very good price-performance ratio + already standard: mobile machine, ideal for quick floor cleaning + stainless steel dividing knife + coated knife head + even division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the working height + side holder for the working plate, readily accessible STANDARD equipment: + 3 working plates included General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 30 dough pieces Piece weight: 40 - 120 grams (dough/product dependent) Dough input: 1,200 - 3,600 grams (dough/product dependent) optionally available: - additional working plates Surcharge: €115.00 net / piece

Year of construction: 2026, condition: new, functionality: fully functional, New machine 2 years warranty Available in 4 different versions, cutting heads can also be replaced Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for quick floor wiping + individual cutters made of stainless steel + quickly replaceable, coated cutting head + up to 4 different cutting heads can be used with one machine + extremely wide weight range (16 g - 400 g can be rounded!) + uniform division of the dough, excellent rounding of the dough pieces + deactivation of the rounding function by pressing a button + ergonomic cutter cleaning position (head can be pivoted 90 degrees forward) + deactivation of the rounding function, pressing time and rounding duration can be programmed + digital display, 10 programs can be saved + easy and quick adjustment of the rounding chamber height + lateral holder for the rounding plate, immediately accessible STANDARD accessories: 3 rounding plates included Lrsdshydpropfx Ai Hjr General technical data: Power: 1.3 kW Connection values: 400V - 3Ph - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (W x D x H) Net weight: 380 kg Size 3-30: Number of pieces: 30 dough pieces Piece weight: 25 - 80 grams (depending on dough/product) Dough input: 750 - 2,400 grams (depending on dough/product) Optionally available: - additional rounding plates Additional cost: 115,-- € net / piece - additional cutting head (including 3 rounding plates) Additional cost: 1,840,-- € net / set

Year of construction: 2023, condition: new, New machine 24 months warranty Advantages: + Excellent price-performance ratio + Robust hydraulic dough divider with a rectangular stainless steel frame + Mobile machine + Teflon-coated cutting and punching grids, easy to replace + Food-safe plastic press segments + Stainless steel knives for dividing dough pieces up to a maximum of 19 kg of dough, 20-part division + Allows for traditional, artisanal dividing and shaping of dough + Punching grids: profiled POM plastic knives, food-safe, for excellent sealing of the dough edges + Optimal for very soft doughs (baguettes, ciabatta, focaccia, sourdough breads, rye breads) + Smooth-running and dust-protected motor + Easy and quick to clean Lrsdpfxshydp Se Ai Hsr + Fast availability of spare parts within 1-2 working days STANDARD accessories, included in the price: + 2x Teflon grids (see PDF / grid catalog) OR instead + 1x plastic grid (see PDF / grid catalog) for gentle punching and sealing of very soft doughs + 1x soft press base, for gentle punching OPTIONAL accessories, available separately: - Stainless steel outer casing (machine in V2A design) + €390 net - Stainless steel tray trolley incl. 14 trays + lids, adapted to the DivOtrad standard + €890 net / trolley + €110 net transport costs / trolley - Dough container for cooling / storing dough after dividing, with lid + €49.50 net / container - Additional Teflon grids (see PDF / grid catalog) + €350 net / piece - Additional Teflon grids with POM plastic knives (1- and 2-part division, see PDF / grid catalog) + €620 net / piece Technical data: - Motor power: 2.2 kW - Protection: 16A-CEE plug - Connection values: 400 V - 3Ph - 50Hz - Dimensions: --- Lid open: 720 x 632 x 1700 mm (W x D x H) --- Lid closed: 720 x 632 x 1200 mm (W x D x H) - Net weight: 285 kg

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: A4-10754, Used machine Overhauled and repainted by a specialist Electrical system reinstalled by a switchgear construction company 6-month parts warranty Features: + Stationary machine, very robust and stable design + Machine is started via an on/off lever, one-hand operation + with deactivation function, for square rolls + Cleaning mode activated electrically via a rocker switch + even division of the dough, excellent rounding of the dough pieces + new dividing knives made of stainless steel (instead of nickel-plated steel knives in a new machine!) + equipped with a new dough ring + Machine was completely disassembled, mechanically overhauled, and repainted + Electrical system reinstalled by a specialist company + Dividing knives precisely fitted into newly coated knife head + Gear parts run smoothly in an oil bath + Complete overhaul performed by a German specialist company, according to German quality standards + Only high-quality original parts are used + Final test with dough was carried out by our master baker and pastry chef Lsdpsivd Ezefx Ai Horr STANDARD equipment: + incl. 3 kneading disks, new Optional special equipment (available at an extra cost): + Machine is fitted with a new frame, ideal for performing floor cleaning at the machine's location Additional cost: €1,485.00 net (including installation) Technical data: Number of pieces: 30 dough pieces Piece weight: 40 - 110 grams (depending on the dough) Dough input: 1,200 - 3,300 grams (depending on the dough) A higher dough input is possible with dough that has not yet been proofed Power: 1.6 kW Connection values: 400V - 3-phase - 50Hz Fuse: 16A-CEE plug Dimensions: 69 x 80 x 147 cm (W x D x H) Net weight: 540 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + Very good price-performance ratio + Already included as standard: mobile machine, ideal for quick dough rounding + Dividing blade made of stainless steel + Coated dividing head + Uniform division of the dough + Excellent rounding of the dough pieces + Ergonomic blade cleaning position (head can be swiveled 90 degrees forward) + Easy and quick adjustment of the rounding chamber height + Lateral holder for rounding plates, readily accessible STANDARD equipment: + 3 rounding plates included General technical data: Power: 0.75 kW Lredpfx Aiehydmhs Hjr Connection values: 400V - 3-phase - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 3-30: Number of pieces: 30 dough pieces Piece weight: 25 - 80 grams (depending on dough/product) Dough input: 750 - 2,400 grams (depending on dough/product) Optionally available: - Additional rounding plates Surcharge: €115.00 net/piece

Year of construction: 2026, condition: new, functionality: fully functional, New machine 2 years warranty Available in 4 different versions, knife heads are also interchangeable Advantages: + Unbeatable price-performance ratio + Already standard: mobile machine, ideal for quick floor cleaning + Dividing knives made of stainless steel + Quickly interchangeable, coated knife head + Up to 4 different knife heads can be used with one machine + Extremely wide weight range (16 g - 400 g round dividing possible!) + Uniform division of the dough, excellent round dividing of the dough pieces + Dividing function can be switched off with the push of a button + Ergonomic knife cleaning position (head can be swiveled 90 degrees forward) + Dividing function, pressing time and dividing duration can be programmed + Digital display, 10 programs can be saved + Easy and quick adjustment of the dividing head height + Side holder for dividing plates, readily accessible STANDARD accessories: 3 dividing plates included Lrsdpfxjivdm Ro Ai Hjr General technical data: Power: 1.3 kW Connection values: 400V - 3-phase - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (W x D x H) Net weight: 380 kg Size 4-30: Number of pieces: 30 dough pieces Piece weight: 40 - 120 grams (depending on the dough) Dough input: 1,200 - 3,600 grams (depending on the dough) Optionally available: - Additional dividing plates Surcharge: €115.00 net / piece - Additional knife head (including 3 dividing plates) Surcharge: €1,840.00 net / set

Condition: new, Year of construction: 2024, New unit 24 months warranty Advantages: + No power connection required, maintenance-free + Small footprint + Easy to maintain, robust design + With a rectangular dough divider tray + Uniform, manual division of the dough + Painted frame + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: + 2x dough divider trays, in which the dough is divided/cut Technical data: Lrjdpfxjivdx Ro Ai Hor - Dimensions of the unit: 620 x 590 x 1960 mm (W x D x H) with lever - Dimensions of the dough divider tray: 475 x 355 x 72 mm (W x D x H) - Working height: 896 mm - Divisions: 20 dough pieces - Piece weight: 90 - 300 grams (depending on the dough) - Dough input: 1,800 - 6,000 grams (depending on the dough) - Net weight: 75 kg