Used Ipetronik Iso Voltage Divider for sale (14,717)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 16,832 h, load capacity: 1,600 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Knsdpfxez A Nkre Apdeb Technical condition: Good Battery voltage: 48V Sideshift, Third valve,

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, power: 37 kW (50.31 HP), unused Showroom model, immediately available: new screw compressor ALMIG BELT XP 37 - 10 bar with Aircontrol Basic control year: 2026 Operating hours: 0 Bh Specifications Type : BELT XP 37 Operating pressure : 10 bar(ue) Flow rate, according to ISO 1217 Annex C : 5.96 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Kodpjy U H N Usfx Apdenb Nominal power drive motor : 37 kW Operating voltage / frequency : 400/50 V/Hz Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1350 mm Width : 940 mm Height : 1680 mm Weight : 895 kg Compressed air connection : G 1 1/2" Visit our shop in Erlangen. We always have a wide range of new and used compressors in stock.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm Knsdpfjfyn Rpsx Apdeb The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Year of construction: 2021, condition: excellent (used), used 7.5 kW screw compressor ALMIG with integrated refrigeration dryer and 270 liter compressed air tank and time-controlled steam trap and Controller Air Control mini Type: COMBI 8/270D Year of construction: 2021 Hours: 2600 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 1020 liters / min Installed motor power: 7.5 kW Protection class / insulation class drive motor: IP 55 /ISO F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 64 Knsdpfxsiqym Hs Apdeb Compressed air connection: G 3/4 " Length: 1180 mm Width: 770 mm Height: 1680 mm Weight: 460 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 Kodpoxabumsfx Apdsnb total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 6,787 h, load capacity: 1,600 kg, lifting height: 5,755 mm, free lift: 1,476 mm, fuel type: electric, mast type: triplex, construction height: 2,476 mm, drive type: Elektro, Reach truck ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 48V Battery year: 2007 Knodpfx Aexy Dk Ropdeb Sideshift,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 6,789 h, load capacity: 1,400 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Battery year: 2021 Sideshift, 3rd valve, Kedpfx Apoz Axhiodonb

Condition: used, functionality: fully functional, machine/vehicle number: H2X386U02173, Year of construction: 2007, operating hours: 13,213 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork length: 1,200 mm, empty load weight: 3,353 kg, drive type: Elektro, Electric 3-wheel forklift Chassis number: H2X386U02173 Load centre: 500 Kedpfx Apeyb Up Ijdonb ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery type: PzS Battery condition: 60 - 80% Description: Workshop-inspected with UVV inspection Side shifter, 3rd valve, rear working light, front working light, half cabin, full free lift, CE certificate, joystick,

Condition: like new (used), Year of construction: 2016, operating hours: 12,000 h, Spinner TTC300-52 SMMCY – Turn-milling center, year of manufacture 2016 Control system: Siemens Sinumerik 840D sl, 2-channel operation Operating hours: approx. 12,000 h (meter reading: 12,137.0 h) Condition: very good, from ongoing production Safety standard: EN ISO 23125:BA3 (Chapter 3.4.5) Working area Max. swing diameter: approx. 400 mm Max. turning diameter: approx. 200 mm Knjdszzvd Ejpfx Apdob Max. turning length: approx. 400 mm Travel distances X1 / X2 / Z: 180 / 110 / 450 mm Y-axis: +40 / −40 mm Rapid traverse rates X1 / X2 / Y / Z: 15 / 15 / 15 / 24 m/min Main spindle Max. speed: 5,000 min⁻¹ Chuck size: 210 mm Spindle bore: 42 mm Power: 15 / 19 kW (S1 / S6 40 %) Torque: 95 / 121 Nm Counter spindle Max. speed: 7,000 min⁻¹ Chuck size: 130 mm Power: 6 / 8.5 kW (S1 / S3 25 %) Torque: 49 / 68 Nm Tool turret 2 × driven turret, BMT45 interface All positions driven, max. 6,000 min⁻¹ Power: 2.3 / 3.5 kW (S1 / S3 40 %) Torque: 7 / 11 Nm Detailed configuration available upon request Equipment Y-axis C-axis main and counter spindle Driven tools Chip conveyor Complete machine documentation / manuals available Connections & Units Voltage: 3/PE ~400 V, 50/60 Hz Connected power: approx. 25 kVA Operating current / fuse rating: 34 A / 35 A Hydraulics: 70 bar, tank approx. 10 l Pneumatics: 6 bar Coolant tank: approx. 150 l Central lubrication: approx. 2–3 l Sound pressure level: 70 dB(A) Transport Weight: approx. 4,600 kg (incl. counter spindle, net) Dimensions: 2,500 × 1,900 × 2,165 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,712 h, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0i MD, table width: 510 mm, table length: 950 mm, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill B 800 was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine includes a table size of 950 x 510 mm and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the POSmill B 800 vertical machining centre we have for sale. Contact us for further details. - Control System: Fanuc 0i MD (Hartrol-Fanuc AI100 display interface)- Storage Capacity: 2+2 GB- Tool Changer: 24-fold ISO 40- Internal Coolant Supply (CTS): 20 bar with cartridge filter- Apparent Power: 25 kVA- Fuse Protection: 35 A- Voltage / Frequency: 400 V / 50 Hz (3-phase)- Power On Hours: 21,699 H- Run Time Hours: 10,712 H- Total Parts Count: 47,887- Standard Equipment: Active air-air control cabinet cooler, Ethernet network connection, regulated spindle cooler, opening left/right side windows, polycarbonate protective enclosure, external spiral chip conveyor, coolant head pump (M-functions), chip flushing pump & device, water gun, air gun, coolant at spindle, operating status light, electromechanical oil coolant separator, mobile electronic handwheel Kedpfjz Arl Iox Apdenb Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest Knsdpfx Ajwxxd Ejpdjb >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Kedpfxsxk Tzgo Apdenb

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 13,473 h, load capacity: 1,600 kg, lifting height: 5,225 mm, free lift: 1,719 mm, fuel type: electric, mast type: triplex, construction height: 2,321 mm, drive type: Elektro, Electric three-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Battery year of manufacture: 2023 Side shifter, 3rd valve Knedpfx Aoz Axgfepdeb

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Kedpfox Rb D Sex Apdsnb Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,927 h, load capacity: 2,500 kg, lifting height: 4,680 mm, free lift: 1,394 mm, fuel type: electric, mast type: triplex, construction height: 2,174 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished, without warranty Technical condition: Good Front tyre type: Non-marking Front tyre size: 23x9-10 Front tyre condition: 60 - 80% Rear tyre type: Non-marking Rear tyre size: 200-50-10 Rear tyre condition: 60 - 80% Kodpfoym Enxox Apdenb Battery voltage: 80V Battery capacity: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Delivered with a new FEM 4.004 inspection including inspection booklet. If you have any further questions, please feel free to contact us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide you with a quote for leasing & financing as well as for delivery at favourable terms. Trade-in of Linde equipment is also possible—even if you do not purchase a device from us. The specified operating hours were recorded as of the date of listing. Subject to prior sale, changes, and errors. Side shifter, fork positioner, Kaup fork positioner with separate side shifter, 3rd valve, 4th valve, rear work light, front work light, full free lift, safety light, LED.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 10,481 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,454 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Knsdpjzztz Iefx Apdob Battery voltage: 80V Side shifter, 3rd valve, 4th valve, heater, full cabin, air conditioning

Condition: used, Year of construction: 2007, operating hours: 10,370 h, load capacity: 3,500 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: telescopic, empty load weight: 5,200 kg, total length: 3,106 mm, drive type: Diesel, construction width: 1,300 mm, Telescopic forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Front tire type: Solid rubber Front tire size: 27x10-12 Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire size: 23x9-10 Rear tire condition: 60 - 80% Battery voltage: 10V Battery type: Starter Kjdpfx Apjzpb S Redenb Rear work light, front work light, full cab, safety light.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 13,134 h, load capacity: 1,500 kg, lifting height: 5,220 mm, free lift: 1,770 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Knsdpfx Aozzgm Repdeb Front tire type: Superelastic Front tire size: 18x7-8 Rear tire type: Superelastic Rear tire size: 18x7-8 Battery voltage: 24V Battery capacity: 920Ah Battery type: PzS Battery year of manufacture: 2019 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not purchase a vehicle from us. Lease-to-own and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, 3rd valve, 4th valve, rear work light, front work light, full free lift, interior mirror, single-pedal control, LED, 3-wheel, seat.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source Kodpfxsy Nd Hyj Apdenb • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 9,150 h, load capacity: 1,400 kg, lifting height: 7,100 mm, free lift: 2,440 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork length: 1,150 mm, drive type: Elektro, Reach Truck Load Center: 600 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Knedpfxey D U Iks Apdeb Transmission: Electromechanical Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Vulkollan Rear Tyres Type: Vulkollan Battery Voltage: 48V Battery Capacity: 775Ah Battery Manufacturer: HSR Battery Type: PzS Battery Year: 2020 Description: In addition to this unit, we offer various other forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM 4.004 safety standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Naturally, we also purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing with attractive terms are available on request. We are happy to provide you with professional and comprehensive advice on our vehicles. 3rd valve, impulse control, full free lift, non-marking tyres, joystick, single pedal operation, 3-wheel, seat,

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding Knedpfx Aeyvvluepdsb The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 10,052 h, load capacity: 1,400 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Knodpoz A Ng Hofx Apdsb Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Battery voltage: 48V Sideshift, Third valve,

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects Knsdpjzrdg Nefx Apdjb

Condition: like new (used), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: S2000BM-00308, turning diameter over cross slide: 360 mm, turning length: 540 mm, turning diameter: 360 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 600 mm, bar passage: 68 mm, Only 3 operating hours - the machine has not yet been used due to a project cancellation. New price: EUR 124,000 plus VAT. TECHNICAL DETAILS Max. swing diameter over bed: 510 mm Max. swing diameter over slide: 360 mm Max. turning diameter: 360 mm Max. turning length: 540 mm SPINDLE Spindle nose: A2-6" Bar capacity: 68 mm Max. spindle speed: 4,500 min⁻¹ Main spindle motor power: 15 / 18.5 kW C-axis: continuous TURRET Tool stations: 12 / BMT 55 Motorized tool stations: 3.7 / 5.5 kW Speed of motorized tool stations: 5,000 min⁻¹ Max. torque motorized tool stations: 16 Nm Indexing time tool turret: 0.15 s Tool holder for external tools: 25 × 25 mm Tool holder for internal tools: Ø 40 mm TAILSTOCK Tailstock mounting: MK 4 Tailstock type: programmable Tailstock quill stroke: 450 mm Tailstock quill diameter: 75 mm Tailstock taper: MT 8 Tailstock quill force: 5,047 Nm AXES AND FEEDS Travel X-axis: 210 mm (180 + 30 mm) Travel Z-axis: 600 mm Drive power X/Z-axis: 1.8 / 3.0 kW Guide rail inclination: 45° Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Ball screw X-axis: Ø 28 mm Ball screw Z-axis: Ø 40 mm ACCURACY Unidirectional positioning repeatability: 6 µm Positioning accuracy X-axis according to ISO 230-2:1988: 15 µm Positioning accuracy Z-axis according to ISO 230-2:1988: 15 µm MACHINE DETAILS Operating hours: 3 h Control system: FANUC 0i TF PLUS Connected load: 31 kVA Supply voltage: 380 V ±10 % Mains frequency: 60 Hz Phases: 3 Machine length without chip conveyor: 2,643 mm Machine depth: 1,560 mm Machine height: 1,920 mm Machine weight incl. chip conveyor and transformer: 4,000 kg COOLANT SYSTEM Coolant tank volume: 185 l Coolant pump output: 0.5 kW Coolant flow rate: 20 l/min Coolant pressure: 5.0 bar EQUIPMENT Kjdpfx Apozpwmqjdonb - FANUC 0i TF PLUS CNC control system - CE conformity - IndustryNet4 connection: remote maintenance, remote monitoring and Industry 4.0 requirements. - Manual Guide i (MG-i) - Preparation for tool force monitoring - 10.4" color LCD monitor - Electronic handwheel - USB interface - Ethernet interface - RS-232 interface - Memory card slot - Manual tool measurement - Parts catcher - Hydraulic 3-jaw chuck, Ø 200 mm, bore 68 mm - Rigid threading - Control cabinet with heat exchanger - Automatic coolant system with 4.5 bar pressure - Central, time-controlled lubrication system - Cooling system for the hydraulic unit - Belt-type chip conveyor with right-hand discharge - Electrical and electronic preparation for bar loader - Internal machine work light - External machine status indicator

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Knjdpfx Asz Ad Dcepdeb Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.