Used Lincoln Central Lubrication for sale (10,945)

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards Hodpshgg Euofx Alweu The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), mileage: 4,71,586 km, power: 390 kW (530.25 HP), first registration: 10/2021, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,040 mm, total width: 2,550 mm, total height: 4,040 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank Hjdpfxoyagu Ho Alwou - Heated mirrors - Carplay - Digital tachograph - Tachograph (driver's control unit) - Fixed - Halogen lamp - High roof - Manual - Radio/cassette - Lane keeping assist - Fabric - Central lubrication - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 9083 kg, Gross vehicle weight: 21000 kg, Total tank capacity: 1070 liters, 2nd diesel tank, Height of the fifth wheel coupling: 122 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Central lubrication, Suspension type: Air suspension, Type of cab: High roof, Cruise control, Tachograph (driver's control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 390 kW (523 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Highline = Further Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 9 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 1 mm; Tire tread depth left outside: 2 mm; Tire tread depth right inside: 1 mm; Tire tread depth right outside: 1 mm; Suspension: Air suspension Weights Unladen weight: 9,083 kg Payload: 11,917 kg GVW: 21,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €1,171 per month (default, 72 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee. Hsdpfxozxxmke Alwju

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Technical specifications Parameter Value Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Hsdpfxokkcm Uj Alwsu Grinding wheel Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: new, Year of construction: 2024, functionality: fully functional, PRO RICHYOUNG cycle-controlled lathe Model: RIC-TC1840N Serial No.: T0123100074 Year of Manufacture: 03/2024 in the following configuration: - CNC control system SIEMENS 828D-SL SHOP TURN - 10.4" LCD color display - Control panel, swiveling 45° - PRAGATI 8-position tool turret VDI30 - Enclosed work area (CE) with electric locking, full enclosure with viewing windows - Chip tray on rollers, extendable to the front - Automatic central lubrication of the slides - Ball screw in X and Z axes - 3-color status indicator light - Work area lighting - Coolant system - Heat exchanger for the control cabinet - Set of operating tools - Technical documentation - CE version - Colors: * RAL 9016 – Traffic white * RAL 9023 – Pearl dark gray Technical data: Center height: 230 mm Distance between centers: 900 mm Swinging diameter over bed: 460 mm Swinging diameter over cross slide: 230 mm Z-axis travel with 8-position turret: 875 mm Bed width: 300 mm Hodpozzcygofx Alwou Headstock: Main spindle bore: 58 mm Spindle mounting: ISO / No. / DIN: 702-1 / 6 / 55026 A1-6 Spindle speed: 0 – 4,500 rpm Recommended chuck diameter: 200 mm Feeds: Feed rate X-axis: 0 – 5,000 mm/min Feed rate Z-axis: 0 – 7,000 mm/min Rapid traverse Z-axis: 5 m/min Rapid traverse X-axis: 7 m/min Positional accuracy (X/Z): +/- 0.005 mm Repeat accuracy (X/Z): +/- 0.005 mm Diameter of ball screw X-axis: 25 mm Diameter of ball screw Z-axis: 40 mm Travel: X-axis: 250 mm Z-axis: 875 mm Tailstock: Quill diameter: 58 mm Quill travel: 150 mm Morse taper in quill: MK 4 Max. workpiece weight: Chuck and tailstock: 175 kg Chuck, steady rest, and tailstock: 261 kg Drives: Power of spindle motor S1 – 100%: 11 kW Power of spindle motor S6 – 40%: 17.5 kW Cooling system: Capacity: 47 liters Pressure of coolant pump: 5 bar Flow rate at 5 bar: 33 liters/min Power of coolant pump: 1.0 kW Dimensions: Length: 2,680 mm Depth: 1,480 mm Height: 1,880 mm Weight approx.: 2,400 kg

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,800 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, power: 257 kW (349.42 HP), empty load weight: 70,000 kg, drive type: Diesel, Full-container reach stacker Load center: 1780 Transmission: Dana TE32418 Condition: Ready for operation and fully functional Technical condition: good Front tire size: 18.00-25 Front tire condition: 60 - 80% Rear tire size: 18.00-25 Hedpszx H Hxjfx Alweu Rear tire condition: 40 - 60% EN: central greasing system, air-condition (automatic climate control) DE: central lubrication system, electronic air conditioning

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW Hedpfx Aljxaam Uowju weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 240 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 17082 kg Dimensions (HxWxD) 4550 x 2450 x 3200 mm Hodpfoxabdzex Alwsu ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching Hsdsy Nd T Hspfx Alwju reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: new, pressure 400 t chamfer lenght 4100 mm distance between columns 3550 mm column arm 510 mm ram stroke speed 110 mm/sec work speed 8.4 mm/sec return speed 130 mm/sec work stroke 375 mm dayligth 650 mm table height 1000 mm table width 240 mm back stop - adjustable max. 800 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 26409 kg range L-W-H 5450 x 2650 x 3470 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German Hsdpfx Aoxaadtjlwou - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 22064 kg Dimensions (HxWxD) 5350 x 2450 x 3150 mm Hsdpfxoxaba Nj Alwou ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: Hsdpjxabvkefx Alwsu - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: used, axle configuration: 2 axles, loading space length: 1,10,500 mm, loading space width: 25,100 mm, loading space height: 10,000 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Notes = For vehicle inquiries, please contact Mr. Seidel (by phone at CY NV 1214/20T/37). Crane: Palfinger 44002, radio remote control, support legs middle and rear, pallet tongs, additional spotlights: vehicle rear, crane, air suspension, BPW axles, drum brakes, Tridec steering, both axles steered, central lubrication system, handbrake crank, cargo space dimensions: length 11,005 mm, width 2,510 mm, height 1,000 mm, tire tread depth: 1st axle: 10–12 mm, 2nd axle: 11 mm. If desired, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be pleased to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale !!! Steering axle = Further Information = Unladen weight: 16,320 kg Hedpfxoyfp H Nj Alwju Payload: 20,680 kg gross vehicle weight (GVW): 37,000 kg Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor Hodszlbp Uspfx Alwou - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Hedswrcwpepfx Alweu Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Hedpfx Alezzw Edeweu Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2015, operating hours: 9,200 h, condition: ready for operation (used), travel distance X-axis: 765 mm, overall weight: 1,960 kg, total height: 1,900 mm, product length (max.): 1,850 mm, table width: 1,920 mm, number of axes: 3, This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details. - Total Power: 6.8 kW- Voltage: 400 V- Frequency: 50 / 60 Hz- Centralized Lubrication Unit: ISHAW YET-A2/A2P2, 2 L capacity- Hydraulic System Pressure: 1270 Psi- Included Components: Machine leveling feet/mounts (5 units visible), Electrical diagrams/manual- Compliance: CE-marked Hsdpfx Aljzzzxhewju

Condition: used, mileage: 1,40,315 km, power: 338 kW (459.55 HP), fuel type: diesel, tire size: 375/90R22.5, axle configuration: 10x4, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: other, total length: 10,100 mm, total width: 2,800 mm, total height: 3,900 mm, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, power assisted steering, traction control, = Additional Options and Accessories = - Electric power steering - Lift axle - Hub reduction - Radio - Reversing camera - Sun visor - Central lubrication system = Notes = Hub reduction. Steel suspension. Third axle on air suspension / liftable. Dynamic steering Tipper: Hardox steel 450 30 m3 Payload: 50,000 kg = Further Information = Hodpfezn Hhbox Alweu Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Front axle 1: Tire size: 375/90R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Front axle 2: Tire size: 375/90R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Mid axle: Tire size: 375/90R22.5; Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Air suspension Rear axle 1: Tire size: 12.00R24; Dual tires; Tire tread depth left inside: 15%; Tire tread depth left outside: 15%; Tire tread depth right inside: 15%; Tire tread depth right outside: 15%; Suspension: Leaf spring suspension Rear axle 2: Tire size: 12.00R24; Dual tires; Tire tread depth left inside: 15%; Tire tread depth left outside: 15%; Tire tread depth right inside: 15%; Tire tread depth right outside: 15%; Suspension: Leaf spring suspension Weights Unladen weight: 24,000 kg Payload: 50,000 kg GVW: 74,000 kg Financial Information Price: On request Identification Model number: FMX 460 10x4 TIPPER / MINING = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, mileage: 1,47,200 km, power: 302 kW (410.61 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Rear-mounted crane Palfinger PK 34002-SH E Power Link Plus, foldable, with remote control, including additional articulated arm PJ 060 B, rotating head and tilting fork 1,500 kg with rear mounting. Diagram: 6.3 m - 4,450 kg, 8.2 m - 3,250 kg, 10.3 m - 2,450 kg, 12.4 m - 1,960 kg, 14.5 m - 1,640 kg, 16.7 m - 1,420 kg. JIB: 25.4 m - 570 kg. * Trailing axle, liftable. ---- ----* Axle load indicator, front and rear * 12-speed automatic transmission * Hill hold * Front axle with air suspension * Differential lock, rear axle * Rear axle with air suspension * Trailing axle, liftable * Duomatik brake connection * Anti-lock braking system (ABS) * Scania emergency brake assist (AEB) * Electronic stability program (ESP) * Scania lane departure warning system (LDW) * Roof hatch in the cab * Exterior sun visor, transparent * Exterior mirrors, electrically adjustable and heated * Power windows for driver and passenger door * Central locking with remote control * Immobilizer (transponder) * Scania Opticruise transmission without clutch pedal * Automatic climate control * Auxiliary heater * Heated driver's seat * Reversing warning * Reversing camera * Fuel tank 400 liters * Fog lights * Engine version Euro 6 * Fuel pre-heater * GPS-controlled cruise control Hsdpfx Aoy Euacjlweu * Engine version with AdBlue * Aluminum side panels * Front panel, raised * Tie-down points in the outer frame * Fifth wheel coupling * Driver's seat with air suspension * Trailing axle, steered * Central lubrication system * EBS * Without spare wheel ----For sale to commercial customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: used, mileage: 5,92,683 km, power: 280 kW (380.69 HP), first registration: 02/2004, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 5,520 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: air, total length: 9,700 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 710 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tachograph (control device) - Fixed - Halogen lights - Tail lift - Manual - Sleeper cab - Fabric - Central lubrication Hedpfjy Hqlwox Alwou = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,250 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 510 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of locks: 1, Central lubrication, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lights, Engine power: 280 kW (375 hp), Fuel: Diesel, Emission standard: Euro 3, Transmission type: Manual, Gearbox manufacturer: Scania, Gears: 6, Clutch pedal, Power steering, ABS, ASR, Starter battery, Rotation direction: 1x20, System length: 80 cm, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: fold-under tail lift, Tail lift capacity: 1,500 kg, Tail lift manufacturer: B.A.R. Cargolift, Tail lift material: Aluminum, Spare wheel, Spare wheel tread: 3 % = Further Information = Transmission Transmission: SCA, 6-speed, manual transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 11 mm; Tire tread right: 12 mm Axle 2: Tire size: 295/80R22.5; Twin tires; Inner left tire tread: 15 mm; Outer left tire tread: 15 mm; Inner right tire tread: 15 mm; Outer right tire tread: 15 mm Weights Unladen weight: 8,250 kg Payload: 9,750 kg Gross vehicle weight: 18,000 kg Functionality Tail lift: B.A.R. Cargolift, fold-under flap, 1,500 kg Loading floor height: 130 cm Condition General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering covers all European brands and all years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good prices • Honest dealing • We speak many languages • We understand our customers • Support with import and transport • (Export) registration handled quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: used, functionality: fully functional, power: 45.5 kW (61.86 HP), fuel type: diesel, color: red, operation weight: 7,290 kg, axle configuration: 2 axles, Year of construction: 2019, operating hours: 4,300 h, Equipment: adjustable boom, air conditioning, all wheel drive, cabin, centralized greasing system, gripper hydraulics, hammer hydraulics, quick-change device, rear view camera, Wacker Neuson EW65 mobile excavator Year of manufacture: 2019 4,300 operating hours 7,290 kg 45.5 kW Perkins engine 30 km/h Adjustable boom Hydraulic quick coupler with Powertilt 3 x buckets: 125 cm, 60 cm and 40 cm All hoses Air conditioning Central lubrication system Diesel particulate filter Rear-view camera Hjdpfoz A Dmbex Alweu Track width: approx. 208 cm

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries Hodpjzuw Ixefx Alwju - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Hodpfx Alozuzpmswsu Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: new, 3-axis CNC milling machine Manufacturer: Quick Type: UE-481PL Hsdpfozvgmtex Alweu New machine Technical data: - PC with Windows 11 - CAD-CAM connection as desired - NC Studio control software - Heavy-duty machine base - Working area: 2100 x 3050 x 200 mm - Double-layer phenolic resin table - grid table - 9 kW HSD milling spindle with 24,000 RPM - 9-position HSD drilling unit - 90° rotatable sawing unit - 12-position linear tool changer - Automatic tool length measurement - Wireless control panel - 3 stops in X, 2 in Y - 2 units of 250 m3/h Becker vacuum pump - Automatic central lubrication - Safety via light curtain - Lifting table loading - Unloading table

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) Hedpfjzuxi Rex Alweu * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)