Used Lisec Operating Panel for sale (38,695)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: Hfedszp H R Eopfx Aftjl The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 210 bar, empty load weight: 175 kg, warranty duration: 6 months, temperature: 98 °C, KARCHER HDS 1000 BE PETROL HOT WATER WASHER Manufactured in 2021 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. NEW 12V 50Ah starter battery. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient HONDA GX390 petrol engine ensures stable operation even during prolonged use. With operating parameters of 210 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Pumping capacity (l/h): 450 - 900 Operating pressure (bar/MPa): 40 - 210 / 4 - 20 Max. water supply temperature (°C): 80 - 98 Fuel consumption (kg/h): 5.6 Engine type: GX 390 Engine manufacturer: HONDA Weight (kg): 175.7 Dimensions (L x W x H) (mm): 1100 x 750 x 785 EQUIPMENT: NEW 12V 50Ah STARTER BATTERY NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW 10m reinforced steel braided pressure hose Hfodpfxoya Azio Aftjl NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE HIGHEST FEATURES FEATURES: Open oil system - no operating time limits Highly readable and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: repair required (used), Year of construction: 2002, functionality: not functional, ★ PRICE REDUCED – MUST SELL: €30,000 (was €80,000) ★ We are selling 3 Imea 2002 Wood Dryers (Imea) + Steam Generator + Boiler (Elbi) 3 Wood Dryers and 1 Steam Generator: - Dimensions: 12.5m x 7.2m x 4.2m 📐 - Capacity for each dryer: 220m3 of timber 🌳 Hjdpfx Aopugxneftofl - Steam Generator: 8.5m x 6m x 5m 📐 - Aluminum structure, sandwich panels 🏗️ Wood and Sawdust Waste Boiler: - Equipped with a pumping system, pipes, and a boiler - Power: 3,500,000kCal/h (40,000kW) Everything operates on an automated system. Total: €50,000 excluding VAT 💰 Dismantling to be done by the buyer 🔧 the seller can assist with a telescopic manitou 📍 Pickup Address: Teiu 337291, Romania 🌍 For more information or to make an offer, please contact us.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782. Hjdpozzvgtjfx Aftofl

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9.233, Year of construction: 2017, operating hours: 12,400 h, load capacity: 7,000 kg, lifting height: 8,050 mm, free lift: 2,730 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 8,050 mm Free lift: 2,730 mm Lifting capacity: 7,000 kg Mast height: 3,730 mm Fork length: 1,190 mm Maximum fork width: 1,530 mm Minimum fork width: 590 mm MACHINE DETAILS Mast type: Triplex Fuel type: Diesel Drive direction: 2 Dimensions & Weight Dimensions (L x W x H): 5,250 x 2,100 x 3,730 mm Overall width: 2,100 mm Overall height: 3,730 mm Unladen weight: 12,820 kg Operating hours: 12,400 h EQUIPMENT Hfsdpezxdk Usfx Aftjl Fork adjustment Full cab Heater Pneumatic tires Work lights Joystick Free lift Documentation CE marking:

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, Hedpszkbpfjfx Aftjfl - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min Hedpfxoxlq Nws Aftefl In very good and clean condition Good working order, tested Good working order, tested As is Availability immediate

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. Hsdpfjxfvp Aex Aftofl The machine will be available from 02/03/2026.

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Hfjdpszy In Hjfx Aftsl Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Hjdporq Dmrjfx Aftjfl Working height from the ground 835 - 960 mm

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Hedszzvf Aepfx Aftsfl Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4033, overall weight: 800 kg, type of input current: AC, input voltage: 220 V, total width: 1,000 mm, total length: 10,000 mm, total height: 1,200 mm, Pitney Bowes Vantage Sorting System designed for high-volume mail processing, document handling and sorting operations. The system is engineered to scan, image and sort large volumes of mail using automated OCR, configurable sorting bins and piece-level tracking. Hfjdpfx Aszxbgajftsl This is a comprehensive industrial sorting system comprising eight sorting sections, multiple sorting bins, operator control panels and monitoring equipment. Information displayed on-site indicates a processing capacity of approximately 45,000 mail pieces per hour and approximately 30 million pieces annually. Depending on the configuration, the available specifications indicate maximum processing speeds of up to 46,300 No. 10 envelopes per hour or up to 50,000 postcards per hour. Manufacturer: Pitney Bowes / BlueCrest Model: STV1 Year: 2012 Product line: Vantage Sorting System Equipment type: Automated letter and mail sorting system Construction: Metal structure New one around 1,5 m. Euros Requests for proposals.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Hedpfx Afszn N Ikotofl

Operating hours: 30,392 h, condition: good (used), functionality: fully functional, Asea Brown Boveri Ltd. Handling Robot Manipulator, IRB 6640 M2004, IRB 6640 130 3 2 Model: IRB6640M2004 Type: IRB664013032 Condition: Used Technical data: 3x400V AC 50-60Hz 20A General: Operating hours: 30,392h Hfodpfxszh I Nys Aftjl Reach: 3.20m Handling capacity: 130kg Center of gravity of the payload: 300mm Wrist torque: 1037Nm Positional repeatability: 0.07mm Path repeatability: 0.7mm Accessories: Control cabinet: Type: IRC5 M2004 Operator panel: FlexPendant Model: DSQC 679 Art. No.: 3HAC028357-001 Rev. 06 Cable set: Main connection cabinet to robot Leoni attachment: Complete cable set MH; A1-3 Art. No.: C06149-00-050 LSH line MH; A3-A6 Art. No.: C06148-00-040H2 Note on the item condition: Robot has been tested, axes 1-6 and operating hours have been read out.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: K215202, working width: 120 mm, working height: 200 mm, overall weight: 3,500 kg, spindle speed (min.): 2,800 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: mechanical, type of input current: three-phase, For sale: Reignmac RMM520 four-side moulder, 5-head configuration, designed for efficient, high-volume processing of wooden components. The machine is fully operational, carefully prepared for immediate use, and ready to be commissioned by the new owner. The offer includes a complete line with additional buffer magazines at both infeed and outfeed, facilitating material handling and increasing productivity. Technical specifications: - Manufacturer: Reignmac (Reignmac Machinery Co., LTD) - Model: RMM520 - Type: Four-side moulder - Number of heads: 5 - Working width: 20 – 200 mm - Working thickness: 8 – 120 mm - Spindle speed: approx. 6000 RPM Hedpfoywkk Ujx Aftjfl - Power supply: 380 V / 50 Hz / 3 phase - Total power: 28.6 kW - Weight: 3500 kg - Year of manufacture: 2010/08 - CE: Yes Feed speed: - Feed speed after upgrades: up to 45 m/min Technical condition: - Machine is 100% fully functional - Ready for operation - On-site inspection at Layman furniture factory recommended (possibility to test in operation) Included equipment: - Reignmac RMM520 (5-head) - Infeed and outfeed buffer magazines - Safety guards with inspection windows - Control panel - Extraction system connections Important information: - Machine is sold without cutters / cutting tools Applications: - Drawer sides and furniture components - Mouldings, rails, blanks - Wooden elements for further processing On-site inspection at the company is possible. Forklift loading available. Please contact us for more information.

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Hjdpfxszw H Dbs Aftefl Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, input voltage: 400 V, overall weight: 121 kg, warranty duration: 6 months, temperature: 90 °C, Kärcher HDS 9/17-4C Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head featuring new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are buying the exact machine shown in the pictures. Technical Data: Hjdpfx Asz Ayn Djftjfl Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 90 Connected load [kW]: 6.5 Fuel tank [l]: 25 Hose length [m]: 10 Weight [kg]: 121 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes Hfedpfx Aszzkvpoftsl accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: used, Siemens SIMATIC Panel PC 6AV7881-3AF00-3DT0 Industrial PC HMI Touch Panel Hodpfozxq T Aox Aftsfl Quantity: 2 units available Manufacturer: Siemens Article number: 6AV7881-3AF00-3DT0 Product type: Industrial Panel PC / HMI Design: Panel PC with touch display Application area: Industrial automation / Machine operation Condition: used

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. Hfedpfxjzvht Io Aftjl NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request.

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES Hfsdpfx Aozx Alkjftol - Power supply: 400 V Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Condition: excellent (used), Year of construction: 2013, operating hours: 404 h, functionality: fully functional, machine/vehicle number: 500897, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KR C4 Compact, teach pendant manufacturer: KUKA, teach pendant model: SmartPad, KUKA KR 6 R900 sixx FLR with KR C4 Compact controller and SmartPad The robot will be delivered with new memory backup batteries. The replacement has already been scheduled and will be carried out before the device is handed over to the new owner. Complete robotic workstation based on the KUKA KR 6 R900 sixx FLR industrial robot, along with the KR C4 Compact controller and SmartPad operator panel. The robot comes from a research and development environment and was used for laboratory and testing work. As a result, it has very low operating hours, approximately 404 hours, which is a small number compared to robots operating continuously on production lines. Specifications: Manufacturer: KUKA Model: KR 6 R900 sixx FLR Payload: 6 kg Reach: 901 mm Number of axes: 6 Year of manufacture: 2013 Controller: KUKA KR C4 Compact Operator panel: KUKA SmartPad Operating hours: approx. 404 h Application The robot is ideal for applications such as: automation of production processes, assembly stations, CNC machine operation, vision systems and machine vision, quality control, research and development laboratories, education and training in the field of robotics. Technical condition The device comes from a research and development laboratory. The visual condition is very good. The robot starts up and communicates with the controller. Before shipment, the device undergoes additional technical verification. Included: - KUKA KR 6 R900 sixx FLR robot, - KUKA KR C4 Compact controller, - SmartPad operator panel, - complete set of cables, Hsdpjziczmjfx Aftofl - mounting base. Additional equipment It is possible to equip the workstation with: - pneumatic and electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation components. More information on tobesold.eu Product covered by a start-up warranty.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik MACHINE OFFERED: The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. Hjdpfx Aezwdwrsftefl TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages).

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Hodpfxsyr Dawe Aftefl Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Hfjdpfszy Hpijx Aftol Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system