Used Mahros Spinner 47/53 for sale (4,504)

Year of construction: 2002, condition: excellent (used), machine/vehicle number: ACO 122, table mounting size: 600 x 1300 mm Hnedpjftt Sfofx Ah Sot movements x/y/z: 810/580/560 mm spindle taper: SK 40 ISA spindle turning speed range: 8000 rpm number of tool positions: 40 pieces carriages: 24000 mm/min spindle drive: 25 kW electrical connection: 380/400 V kW space needed: 3200 x 2500 x 2900 mm weight: 9000 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. Hedpfxezg Dx Uj Ah Ssnt These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, SmartLift SL-380 Outdoor, like new, only 790 hours. Hnjdpezz Spwefx Ah Sot

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Hjdpfxoy Rtlzs Ah Sont

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Hnedpfx Ahjz Agv Us Sst - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Hnedpfxez Agw Es Ah Sjt Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Hedpoz Ag Rrsfx Ah Ssnt - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 39 m/min, feed rate Y-axis: 39 m/min, feed rate Z-axis: 39 m/min, workpiece weight (max.): 2,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, We offer this Hurco BX50i vertical machining center in very good condition, manufactured in 2020. It was first put into service in 2021. Model: BX50i Work table surface 1500 x 960 mm T-slots 6 x 22 mm Maximum permissible uniformly distributed loads 2500 kg Door opening 1100 mm Hnjdpfx Ahezzlu Tj Sst Distance between the 2 columns 1060 mm Distance from spindle nose to table min/max 180/780 mm Spindle speed: 0 – 18000 rpm Hybrid spindle bearings Bearing lubrication: Grease/air Spindle taper: HSK63 FORM A Peak power (for 1 min) Continuous 47 HP - 35 kW at 2800 rpm 33.5 - 25 kW at 2800 rpm Maximum speed: 18,000 rpm Number of tools: 50 Center spindle coolant: 40 bar KNOLL paper filtration If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, machine/vehicle number: 007802, Max. panel width: 800 mm Hodpexn Nf Nsfx Ah Ssnt Max. panel length: 2000 mm Length of conveyor: 8320 mm Panel return for edgebander: Left

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Hedpfx Aezz Rh Seh Sent Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 If you have any questions or require further information, please feel free to send us a message or call us. Hjdszyfw Sepfx Ah Ssnt

Condition: like new (used), Nilma salad spinner in as new condition. 5-8 kg per cycle with a 1-2 minute cycle time Hodpfsy Hqanox Ah Sjnt

Condition: good (used), number of rollers: 3, roller (top) diameter: 130 mm, sheet thickness (max.): 3 mm, - Capacity: 1550 x 3 mm - Top roll diameter: 130 mm - Roll length: 1550 mm - 380V Hnjdpfx Ajz Ayp Ieh Sst

Condition: used, functionality: unexamined, Endress+Hauser Promag 53 Electromagnetic Flow Meter DN40 PN16 – Hastelloy C22 – Promag H Endress+Hauser Promag H 53 Electromagnetic Flow Meter High-quality Endress+Hauser Promag 53H electromagnetic flow meter, complete with a digital transmitter. Suitable for hygienic and chemical process applications requiring highly accurate flow measurement. Removed from a functioning industrial installation and in very good visual condition. Immediately available from stock in Rotterdam, The Netherlands. Manufacturer Endress+Hauser Series Promag H Hjdpfszmg Sdsx Ah Sent Model Promag 53 Order Code 53H40-1LM8/0 Sensor 53H40-UFB1AA0AAAAA Nominal Diameter DN40 (1½") Pressure Rating PN16 / 230 psi Process Temperature -20°C to +150°C Power Supply 85–260 VAC 50/60 Hz Outputs HART Current Output Frequency Output Protection IP67 / NEMA 4X Liner Material PFA Seal Material EPDM Electrode Material Hastelloy C22 SURPLUS – Industrial Solutions From Surplus to a Second Life

Condition: used, mileage: 5,01,000 km, power: 213 kW (289.60 HP), first registration: 11/2016, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro6, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), * MAN A 47 MIDI * Registered: 11/2016 * Lion's City M * Maintenance history for the past 4 years available. * ONE OWNER * Clean vehicle * Low mileage * 85 km/h * 213 kW / 290 HP – EURO 6 * Class 1 * Matrix display with control unit FRONT / SIDE / SIDE / REAR – Gorba * Retarder * D/N/R/1/2/3 * Air conditioning * Auxiliary heater (stand heater) * Lettering: Adhesive film * Reversing camera – Rosho * Interior surveillance – Rosho * Manual folding ramp * Additional heater Hedpfxeyl Evae Ah Sent * Convector heating * Note: The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee. Subject to prior sale. Please see our terms and conditions.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Hnedpoznm H Dsfx Ah Sst

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Hedpfx Ahjzz A A Is Sent Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: used, maximum load weight: 29,160 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,500 mm, loading space width: 2,350 mm, loading space height: 2,000 mm, Year of construction: 2013, Equipment: ABS, Aluminum half-shell tipper body, 47 cubic meters, air suspension, 1st and 3rd axle lift axle, MB disc brakes, aluminum support legs, cargo area lighting, access ladder, PVC half-shell mudguards, folding UFS (underrun protection system), vibrator, overlapping rear wall, slide, hopper with dust bag, ladder and walkway, roll tarp with central locking, tires with 40% tread remaining. Hnodpfx Asy S Nkveh Sjt

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, MAZAK moving column machining center VTC 530 Year 2021 Control unit: SMOOTH G X-axis travel: 1740 Y-axis travel: 530 Z-axis travel: 660 Hodszz Sutepfx Ah Ssnt Table length: 2300 Table width: 760 Distance between the top of the table and the spindle nose: 180 Maximum workpiece size (length x width x height): 4100x905x790 Table surface: T-slot Maximum workpiece weight: 1400 Spindle speed: 12,000 rpm Spindle mount: ISO 40 Din Rapid traverse rate, X-axis: 42000 Rapid traverse rate, Y-axis: 42000 Rapid traverse rate, Z-axis: 42000 Number of tools: 30 Coolant pressure: 25 Bar, additional tank Machine with 8,000 spindle hours, primarily used for aluminum machining.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Hnsdpfx Aezzrutjh Set Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller Saturn FKS450 tool grinding machine, year of construction 1997. Hodpfx Ahjzzydvs Sjnt Manufacturer: Sigrist + Müller AG Model: FKS450 Serial Number: 1460 Year of Manufacture: 1997 The machine is in good condition but has not been used for several years. It is sold with the guards and accessories shown on the pictures. Please make a reasonable offer per email.

Condition: used, Year of construction: 2007, Schmalz A-175N-47/B-19 DI Piston Metering Pump, 6 bar, Metering Pump Manufacturer: Schmalz GmbH Device type: Piston metering pump Type: A-175N-47/B-19 DI Hnsdjzxrn Iepfx Ah Sjt Series according to documentation: SR Design: Metering pump with return spring Year of manufacture: 2007 Maximum pressure: 6 bar Flow rate at 50 Hz: 226 l/h Flow rate at 60 Hz: 271 l/h Metering rate: adjustable Drive: Three-phase motor Motor type: 71 A 4 Motor protection class: IP55 Condition: used

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller FKS 450-1HNFE sharpening machine, year of construction 1997. Manufacturer: Sigrist & Müller AG Hodpfxjzzyfte Ah Sjnt Machine type: FKS 450-1HNFE Serial number: 1468 Year of manufacture: 1997 year Country of origin: Switzerland The machine is in good condition but has not been used for several years. This machine is CNC controlled and is sold complete with with the guards and accessories shown on the pictures. Please make a reasonable offer per e-mail.

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hjdpfsxzphwex Ah Sjnt All our items have been inspected by the technical department.

Year of construction: 2001, condition: excellent (used), Control SIEMENS Swing over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 rpm tailstock multifix Hodpfx Ahslawako Ssnt Accesories