Used Makk Bala Makina for sale (476)

Condition: new, Year of construction: 2025, pressing force: 2,500 t, stroke length: 1,000 mm, table width: 1,800 mm, table length: 2,600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length. The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame via vibration method - Bronze Zr14 slide bearings - Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in accordance with CE standards - PLC-controlled hydraulic system - 7” touchscreen panel (DELTA) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system Gbedpsx N T S Esfx Aatjt - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 tons Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Weld Stress Relief: Vibration method Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Bolster Fast Descent Speed: 150 mm/s Moving Bolster Drawing Speed: 12 mm/s Moving Bolster Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,500 mm Approx. Press Width: 3,950 mm Approx. Press Depth: 2,600 mm Lower Table Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 120 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment Gbsdpjx N T Uyofx Aatjt - Steel construction, H-frame body with 8 sliding guides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame body with 8 sliding guides - Frame Material: St52 – ERDEMİR grade - Slide Bearing: Bronze Zr14 - Capacity (Ram): 100 Tons - Capacity (Cushion/Blankholder): 40 Tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress-relieving - Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Flanging Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Distance from Floor to Lower Table: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Gbsdjwnagtjpfx Aatot

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Gbjdpfxsyzhl Ds Aatjt

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING Gsdpfx Aaow Hgbhotebt OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: SN201000003, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller model: FANUC Series 16i-LB, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: FANUC LASER C4000i-B / C4000i Model B, laser hours: 13,443 h, laser power: 4,000 W, laser wavelength: 106 nm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 170 m/min, positioning accuracy: 0.1 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 19,500 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, For sale: CNC CO₂ laser ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5 – 4 kW Used CNC laser cutting machine for sheet metal, ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5, is for sale. The machine is equipped with a FANUC CO₂ laser source C4000i-B, 4 kW, and a FANUC Series 16i-LB CNC control system. The laser has a working area of approximately 3000 x 1500 mm and is suitable for cutting carbon steel, stainless steel, and aluminum, depending on the material, thickness, gases used, and machine settings. The machine is equipped with the following main peripheral units: Thermotec chiller, Metal Working srl suction/filtration system, Atlas Copco dryer/air preparation system, and Precitec cutting head. It has an exchangeable/movable table for easier loading and unloading of sheet metal. The machine features two loading tables. Main technical data: Manufacturer: ERMAKSAN MAKINA SANAYI TIC. A.S., Turkey Model: LASERMAK 4000.3 x 1.5 Type: CNC CO₂ laser cutting machine Working area: approximately 3100 x 1500 mm Laser source: FANUC LASER C4000i-B Laser power: 4000 W / 4 kW Max pulse peak power: 5000 W Control: FANUC Series 16i-LB Axes: X-Y-Z-U-V Maximum positioning speed: 170 m/min Power supply: 380 V Electrical consumption: 75–90 kW Dimensions: 5285 x 10480 x 2040 mm Weight: 19,500 kg Cutting head: Precitec Chiller: Thermotec LJ45A35 Suction: Metal Working srl UNIT-POLYGONAL Dryer / air preparation: Atlas Copco CD 25+ Serial number: SN20100003 Laser source production: FANUC, Japan, May 2011 Maximum cutting thicknesses: Carbon steel: up to 20 mm Stainless steel: up to 12 mm Aluminum: up to 8 mm Gsdpfx Aaeziluiotjbt Additional equipment: Thermotec LJ45A35 chiller Metal Working srl suction/filtration system Atlas Copco CD 25+ air preparation/dryer system Precitec cutting head FANUC Series 16i-LB CNC control system FANUC CO₂ laser source C4000i-B Exchangeable/movable table Condition The machine is available and can be inspected on-site. It is sold in its current condition, with all the equipment included. It is suitable for manufacturers of metal products, metal structures, sheet metal components, and companies looking for a powerful CO₂ laser with a large working area. Inspection is possible by prior arrangement.

Condition: good (used), Altinisik Makina 1020 Flexographic Printer Gbsdezz Hh Iopfx Aatjt The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects. Gbedpfsyb Rpdox Aatot

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1973, total width: 1,950 mm, total length: 5,650 mm, total height: 1,920 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 7 bar, overall weight: 2,300 kg, type of input current: three-phase, CAPACITY 250 pcs/min CAPACITY (REINFORCED BAG) 100 pcs/min BAG WIDTH 830 mm BAG LENGTH 70-1000 mm BAG THICKNESS 0,020-0,100 mm QTY OF SERVO MOTORS 4 pcs TOTAL POWER 11 kw MACHINE WIDTH 1760 mm MACHINE LENGTH 5650 mm MACHINE HEIGHT 1920 mm MACHINE WEIGHT 2300 kg STANDARD FEATURES - Thanks to the touch operator panel, the bag size, the number of bags, the production speed, the number of bags in the package can be seen, the number of stops in the total count. - There is 1 photocell for cutting printed and unprinted bags - Servo motor controlled pulling rollers help cutting at high speed and with the desired measurement precision. - Thanks to the servo motor controlled welding jaw, strong and quality welding is ensured. - Thanks to the servo motor controlled belt system, the belts work synchronously to the stacking system. - Stoper roller system with servo motor controlled for better stacking - Warp rolls inverter tension control systems - With pneumatic ballerina system - Automatic edge control systems - Automatically stops when the roll is finished - Photocell stops automatically when printing place is not correct - Ability to work in PP, OPP, CPP, High Density Polyethylene ( HDPE ), Low Density Polyethylene ( LDPE ), bags Godjzga T Iopfx Aatobt STANDARD EQUIPMENT - Patch handle unit - Handle hole punch - Bottom support welding apparatus - Bottom gusset apparatus - PE side welding (digging) jaw - PE double weld (t-shirt) jaw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2082, total width: 1,700 mm, total length: 5,450 mm, total height: 1,900 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,500 kg, type of input current: three-phase, CAPACITY 250 pcs / minute max. BAG WIDTH 80 mm – 800mm max BAG LENGTH 70 mm -1000 mm FILM THICKNESS 0.020 mm- 0.100 mm TOTAL ELECTRIC POWER 13 kW (380 V-50Hz) SERVO MOTOR 4 UNIT FOTOCELL 1 UNIT TOTAL AIR SUPPLY 6 Bar min MACHINE WIDTH 1650 mm MACHINE LENGTH 5450 mm MACHINE HEIGHT 1900 mm WEIGHT 1475 kg STANDARD FEATURES Through touch operator panel; length of the bag, pieces bag, production speed, visible bag pieces in the package, stop feature in the number of written in total counting.  There is one Photocell. Cut are printed and unprinted bags.  It cuts at high speed and with the desired measurement precision through to the servo motor controlled pulling rollers.  Strong and high quality welding is achieved through to the servo motor controlled welding jaw.  Lsbrszd N Ipj At Dtgsac Through to the servo motor controlled belt system, belts work synchronously to the stacking system.  Through to the servo motor controlled stacking rollers, it provides quality stacking.  Warp rolls with inverter tension control system,  Gbodpfx Aozgaw Hoatjt Pneumatic ballerina system,  Automatic edge control system,  Automatically stops when the roll runs out,  When the photocell print location is not correct, it automatically stops.  Roll bobbin binding diameter max 800 mm  Ability to work in PP, OPP, CPP, High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), bags,

Condition: used, Year of construction: 2019, Automatic separator for removing bacteria from milk and whey (bactofuge). These operations are necessary to eliminate bacterial contaminants that may pose a health risk and shorten the shelf life of the product. Brand: POLAT (Makina San) Model: PMS BX5 Centrifuge speed: 6,200 rpm Year of production: 2019 Power supply: 400 V Installed power: 22 kW Gbjdpfxsyc E E Aj Aatet Weight: 1,220 kg Condition: used Electrical documentation available.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total width: 1,650 mm, total length: 5,450 mm, total height: 1,900 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,475 kg, type of input current: three-phase, CAPACITY: 250 pieces/minute max. BAG WIDTH: 80 mm – 800 mm max. BAG LENGTH: 70 mm - 1000 mm FILM THICKNESS: 0.020 mm – 0.100 mm TOTAL ELECTRIC POWER: 13 kW (380 V – 50 Hz) SERVO MOTOR: 4 UNIT PHOTO CELL: 1 UNIT TOTAL AIR SUPPLY: 6 Bar min. MACHINE WIDTH: 1650 mm MACHINE LENGTH: 5450 mm MACHINE HEIGHT: 1900 mm WEIGHT: 1475 kg STANDARD FEATURES - Controlled via a touch operator panel: bag length, number of pieces per bag, production speed, visible number of bags in the package, stop function based on the total count. - Equipped with one photocell. Handles both printed and unprinted bags. - High-speed cutting with precise measurement, achieved through servo motor-controlled pulling rollers. - Strong and high-quality sealing is achieved through a servo motor-controlled sealing jaw. - The servo motor-controlled belt system ensures synchronous operation of the belts with the stacking system. - Servo motor-controlled stacking rollers provide high-quality stacking. - Warp rolls with inverter tension control system. - Pneumatic ballerina system. - Automatic edge control system. - Automatic stop when the roll is empty. Gbedezd N Ipjpfx Aatjt - Automatic stop when the photocell print location is incorrect. - Roll bobbin binding diameter: max. 800 mm. - Capable of processing PP, OPP, CPP, High Density Polyethylene (HDPE), and Low Density Polyethylene (LDPE) bags.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. Gbedpfx Aasw S In Eetot 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Drive : By Belt GT54 x 2

Condition: new, Year of construction: 2022, operating hours: 1 h, functionality: fully functional, For sale: İkra Makina IPM 2850 automatic strip and wire bending and forming machine. It features a 12-ton press capacity and a 15 kW servo motor. This ensures precise operation for wires with a diameter of 6-16 mm. The machine comes with tooling suitable for manufacturing pipe clamps. By using other tools, it can bend various types of wires and strips. It was never used for mass production. Only a few test pieces were made on it. It is for sale due to a cancelled project. The offer includes the 6 tools, the press machine, and the matching nut welding machine. The sizes of the current tools are: • 40-44 • 48-54 • 55-59 Gedexuhd Dopfx Aatsbt • 60-66 • 68-73 • 75-80

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 38 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, USB port, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks Gedpfx Aezwk R Soatjbt  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 Godew Rya Dopfx Aatebt PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AWPC 6005, total width: 5,000 mm, total length: 8,000 mm, total height: 2,000 mm, Automatic Wooden Pallet Collars The machine equipment is specified below in sequence: 1-Automatic Wood Feeding Unit 2-Automatic Drilling and Nailing Unit (including Automatic Nail Feeder) 3-Automatic 180-Degree Turning Unit 4-Automatic Hinge Pickup and Positioning Unit 5-Automatic Crimping Unit 6-Automatic Marking Unit 7-Automatic Stacking Unit 8-Automatic Width Adjustment System All mechanical components, pneumatic equipment, and electrical components included in the machine are covered within the quoted price. The pneumatic components are configured with Festo products, and the automation system is configured with Mitsubishi components. The product specifications for operation on the machine are as follows: Board Length: 700 mm – 1600 mm Board Width: 180 mm – 230 mm Board Thickness: 15 mm – 25 mm Line Capacity: 300 products/hour (capacity may be increased depending on the product dimensions being processed) Installed Power: 40 A, 380 VAC, 50 Hz Air Consumption: 1,500 liters/minute Machine Weight: 9,500 kg Gedpfx Aaezi Tvbetebt The entire machine has been designed by EFO Makina. Dimensional revisions and changes to material brands can be implemented in accordance with the customer's requirements. All CE certification documents, spare parts lists, and operation manuals related to the machine will be supplied together with the machine upon delivery.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 60 mm, controller model: CNI N-Conex, spindle speed (max.): 24,000 rpm, The submission of a bid obligates the successful bidder to collect the item by 15.06.2026 at the latest! TECHNICAL DETAILS Maximum workpiece length: 2,800 mm Maximum workpiece width: 2,100 mm Maximum workpiece height: 60 mm Travel range X-axis: 2,800 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 250 mm Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Feed rate Z-axis: 30 m/min Spindle motor power: 9,000 W Number of spindles: 10 Maximum spindle speed: 24,000 rpm Number of tool magazine positions: 12 MACHINE DETAILS Control system: CNI N-Conex Dimensions (L x W x H): 11,500 x 3,700 x 2,400 mm Vacuum pump: Becker 250 m³/h, 8 zones EQUIPMENT Gbodpfx Aasy Sadajtet Automatic tool measurement Automatic lubrication system (Dropsa) Automatic labeling (barcode system) Lift & loading system Unloading system with conveyor belt Pressure rollers for multiple panel processing

Condition: new, Year of construction: 2026, machine/vehicle number: M-Y 270, functionality: fully functional, operating hours: 818 h, power: 380 kW (516.66 HP), cutting height (max.): 270 mm, cutting width (max.): 270 mm, total height: 900 mm, total length: 1,650 mm, total width: 810 mm, overall weight: 550 kg, table height: 1,500 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Çeyrek yüzyılı aşkın deneyimle, testere endüstrisinde kalite, dayanıklılık ve güvenilirliğin simgesi haline geldik. 25 yıllık uygulamalı uzmanlık ve derin sektör bilgisiyle desteklenen bir şekilde, sadece ürünler sunmakla kalmıyoruz — müşterilerimize uzun ömürlü çözümler sunuyoruz. Her bir ürünümüz yüksek performans, hassas kesim ve maksimum verimlilik için tasarlanmıştır. En zorlu koşullarda bile, testere çözümlerimiz kalitesini koruyor ve profesyonellerin ilk tercihi haline geliyor. Gelişen teknolojilere uyum Godpfoy Akggjx Aatsbt sağlayarak, üretim standartlarımızdan asla ödün vermeden kendimizi sürekli geliştiriyoruz. Çünkü güçlü sonuçların doğru araçlarla başladığına inanıyoruz. Gücümüz deneyimden, keskinliğimiz ise zanaatımıza olan tutkumuzdan gelir.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, number of axes: 3, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation Gedpfxszwk Spe Aatobt  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: new, Year of construction: 2026, functionality: fully functional, We are a manufacturer of fully automatic machines for the production of wet wipes, from raw material input to finished product. This machine is specifically designed for the production of disposable wet mops, wet wipes for disinfection, antibacterial hand cleaning, and baby care products. We offer several machine options with varying production capacities. It automates the process of assembling and packaging these mops, ensuring high efficiency and quality. Applications of the Disposable Wet Mop Making Machine include: Household cleaning: Disposable wet mops produced by this machine are widely used in homes for quick and convenient floor cleaning. Commercial cleaning services: It provides a reliable source of disposable mops for professional cleaning companies to use in various commercial settings. Hospitality industry: Hotels, restaurants, and other hospitality establishments can benefit from these disposable mops for maintaining cleanliness. The key advantages of this machine are as follows: Efficient production: It significantly increases the production rate of disposable wet mops, meeting the high demand. Consistent quality: It ensures that each mop is made to a consistent standard, offering reliable cleaning performance. Cost savings: By automating the process, it reduces labor costs and enhances overall production efficiency. Versatility: It can produce different types and sizes of disposable wet mops to accommodate various cleaning needs. Gedezavgropfx Aatjbt Hygiene and cleanliness: The disposable nature of the mops promotes better hygiene as they can be easily replaced. Simple operation and maintenance: The machine is designed to be user-friendly, with straightforward operation and low maintenance requirements.

Condition: new, Hazar Makina HM625 Transfer Printer Gbodpfx Ajq Rd Rcsatst Year of manufacture: 2021 Model: 600 Print width: 2000 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW Electrical consumption per hour: 18 kW Heating system: Thermal oil (even surface heat distribution) Machine control panel: 7-inch LCD PLC system Cooling system: Automatic Resistance power: 30 kW Motor power: 2.2 kW Heating time: 70 minutes Tensioning and guiding system: Automatic (pneumatically controlled linear carriage) Cylinder temperature control: Both outer and inner surfaces automatically controlled Print speed: 3-7 meters per minute Felt: Nomex Item condition: Exhibition piece Financing through our partner bank is available. komplett-konzept.leasingo.de Further printers in other sizes—new and used—can be found in our shop! International shipping available on request!

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Max. steel profile capacity (mm) 80 x 80 x 4 Gsdpfx Aszt Ir Ssatsbt Max. radius (CLR) 300 Min. radius (CLR) 55 Control system PLC Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Condition: new, CNC-38/R3 Max. Diameter (max. O.D.) 38 mm Max. Wall thickness 2 mm Max. Diameter (max. O.D.) for stainless steel 438 x 1.5 mm Max. Bending angle 190 (°) Hydraulic pump motor 11 kW Total motor power 22 kW Max. Hydraulic pressure 140 (bar) Mandrel Length 3450 mm Machine Length 5850 mm Machine Weight 3000 kg Gedpeztpf Tsfx Aatjbt

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. We use the system as follows: Gjdpfx Aszu Rguoatsbt up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm up to 250 kg, up to 4200 rpm The system can be inspected in Neusäß by prior arrangement.