Foil processing machine

Öz-mak Plastik Makina ÖZM 85 TLX UNIVERSAL BAG CUTTING MACHINE

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 11,700 h, power: 8.9 kW (12.10 HP), travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, The machine is used for fine machining of small pieces. (Al, steel) Djdsq N Ayfopfx Ap Dsku

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine is in very good working condition. Dedpfx Aoyux Sgjp Dsku Still in production. Test possible at any time. Available immediately.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, Automatic strapping machine in very good condition. Has been part of a larger system, but is not used. Only Strapex for sale. Dedeuaxgxspfx Ap Deku

Condition: good (used), Year of construction: 2010, operating hours: 1,15,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Dkedpfx Apoyx U Nwo Dou

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Dkjdpfeyw Tc Tox Ap Dsu

Condition: used, Year of construction: 2006, functionality: fully functional, grinding length: 1,500 mm, grinding width: 800 mm, total length: 5,350 mm, total width: 2,850 mm, feed length X-axis: 1,900 mm, feed length Y-axis: 750 mm, workpiece weight (max.): 1,400 kg, grinding wheel diameter: 400 mm, distance table to spindle center: 600 mm, table length: 1,500 mm, table load: 1,400 kg, table width: 700 mm, grinding wheel width: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 11,000 kg, grinding spindle motor power: 11,000 W, travel distance X-axis: 1,900 mm, travel distance Y-axis: 750 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 1,000 rpm, space requirement length: 5,350 mm, space requirement width: 2,850 mm, We offer this used Ziersch ZT 715 surface grinding machine, year of construction 2006. Manufacturer: Ziersch Model: ZT 715 Year of construction: 2006 Condition: used Machine type: Surface grinding machine Grinding area mm 1,500 × 800 Cross movement (transverse travel) mm 750 Longitudinal movement (longitudinal travel) mm 1,9 Magnetic chuck size mm 1,500 × 700 Distance from table to spindle center mm 600 Ground table surface mm 1,550 × 700 Table load incl. magnetic chuck kg 1,4 Longitudinal feed rate mm/min 1,000 – 30,000 Cross feed rate mm/min 0.01 – 2,000 Vertical feed rate mm/min 0.001 – 1,500 Grinding wheel dimensions mm 400 × 80 × 127 Dodpfx Aeznx Exep Deku Grinding spindle motor power kW 11 Grinding spindle motor speed range rpm 1,000 – 3,000 Approx. machine weight kg 11 Approx. space requirement mm 5,350 × 2,850 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2022, CNC Vertical Machining Center VOC-1000 BASIC TECHNICAL DATA: - Travels in X/Y/Z axes: 1040 / 580 / 620 mm - Spindle speed 12,000 rpm; BT-40 - Work table 1120x560 mm; load capacity 750 kg - Distance from spindle center to table 125-745 mm - Distance between spindle axis and column 666 mm - Working feed rates up to 10 m/min - Rapid traverse rates 36/36/30 m/min - Positioning accuracy +-0.008 mm; repeatability +-0.005 mm - Machine dimensions (W x D x H) 2671 x 2800 x 2760 mm - Machine weight 7000 kg STANDARD MACHINE EQUIPMENT: - FANUC 0I-MF Plus control system (5); 10.4˝ LCD display - Spindle motor Fanuc Beta 11/15 kW - Servo motors for axes Fanuc Beta 1.8/1.8/3.0 kW - AICC program pre-reading of 40 blocks - MPG handwheel - Spindle oil cooler - Air blow gun and emulsion flushing gun - Chip conveyor (screw type) with container - 24-position tool magazine A.T.C - PMI ball screws and linear guides on all axes - Through-spindle coolant for tool changing - Chip flushing system - Heat exchanger for electrical cabinet - Automatic lubrication system - Signal light & work LED lamp - Fully enclosed work area with cabin - Tool kit Djdpfsiwtnajx Ap Deku - Leveling screws and pads - CE standards ADDITIONAL MACHINE EQUIPMENT: - Through-spindle coolant at 20 bar with additional 600l tank (5,000 EUR + VAT)

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Dodpfowaa Tdjx Ap Dsku

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,700 h, DMG vertical machining center Model DMC 65 V Year : 2002 X - Y - Z travel : 650 - 500 - 500 mm. RPM : 18000 Tool change : 30 pcs. Spindle taper : ISO 40 Control : MILL PLUS Syncronspindle Hand wheel for axes travel Interface RS-232 C Dodpfx Asxqch Aop Deku Coolant

Condition: good (used), Year of construction: 2004, turning length: 1,345 mm, turning diameter: 420 mm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,280 mm, Manufacturer: Mori Seiki Co., Ltd. (Nagoya, Japan) + chuck system Machine model: NL3000MC/1250 Serial number: NL301DJ0070 Year of manufacture: October 2004 Machine weight: 7600 kg Electrical data Voltage: AC 200 V Phases: 3 Frequency: 50 Hz Rated power: 44 kVA Full load current: 127 A Spindle motor current: 200 A Interrupting capacity: 5 kA Electrical diagram number: NL301DJ0070 The machine is a CNC turning center (Mori Seiki NL series) with a nominal electrical power of 44 kVA. CHUCK SYSTEM: Manufacturer: Kitagawa Chuck: B-212A821F Chuck cylinder: S2091 Technical data Permissible pressure (when using external chuck jaws on the standard package): 2.7 MPa Maximum speed: 3000 min⁻¹ CNC turning center of the NL series (Mill Center version) with milling capability (driven tools + C-axis). The data is compiled from original Mori Seiki / DMG MORI catalogs and matches your machine's nameplate (year 2004, weight 7600 kg, 44 kVA, 200 V). Capacity ValueMax. turning diameter420 mmMax. turning length1250–1345 mm Swing over bed995 mm Swing over carriage825 mm Bar capacity90 mm (3.5") Standard chuck12" (Kitagawa B-212A821F) Travels X-axis: 260–280 mm Z-axis: approximately 1280–1370 mm (depending on the exact configuration /1250) Y-axis: option (usually ±60 mm for Y/SY versions) Spindle Max. speed: up to 4000–6000 min⁻¹ (limited to 3000 min⁻¹ with your Kitagawa chuck) Spindle bore diameter: 105 mm (approximately 91 mm with chuck) Spindle mounting: A2-8 Dedpozm Tkaefx Ap Deku Spindle motor power: 22/18.5 kW (30/25 HP) or up to 30 kW (depending on the version) Minimum indexing angle: 0.001° Turret (MC version) Number of stations: 10 or 12 Rotary tools: yes (max. 6000 min⁻¹) Power of rotary tool drive: 5.5 / 5.5 / 3.7 kW Indexing time: approximately 0.2–0.3 s Rapid traverses and drives Rapid traverse X/Z: up to 30 m/min Rapid traverse Y: up to 10 m/min (if equipped) C-axis: up to 300–400 min⁻¹ Electrical and other data (from your nameplate) Rated power: 44 kVA Voltage: 200 V AC, 3-phase, 50 Hz Full load current: 127 A Machine weight: 7600 kg Controller: typically MSX-850 / MAPPS