Used Masterwood Chain Chisel Machine, Chiseling Machine for sale (67,261)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. Fedpfx Aezu Nm Hsptjgg * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Fgsdpezx Anfofx Aptjg Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Fgedsxy Tm Iepfx Apteg

Condition: ready for operation (used), Year of construction: 2017, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 2500 mm Y-AXIS TRAVEL: 1800 mm Z-AXIS TRAVEL: 800 mm DISTANCE SPINDLE NOSE-TABLE: 250 - 1050 mm RAPID FEEDS X-Y-Z: 20 m/min SPINDLE: 10000 rpm; 24,5 - 63 kW; 117-300 Nm; ISO 50 - BT TABLE SIZE: 2800 x 1700 mm MAX ADMITTED LOAD: 8000 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 130 mm MAX TOOL LENGHT: 350 mm MAX TOOL WEIGHT: 15 Kg Fsdpfx Apjzlu S Aotegg CONTROL UNIT: HEIDENHAIN WEIGHT: 29500 Kg OVERALL DIMENSIONS: 4200 x 7100 x 4500 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; LINEAR SCALES ; TOOL SETTER ; PORTABLE HANDWHEEL ; EXHAUST SYSTEM NOTE: COMPLETO DI N.54 CONI ISO50

Condition: used, Year of construction: 2004, functionality: fully functional, Special price, as the machine needs to be removed by August 28th. Special Price, contact us! Control system: - HEIDENHAIN iTNC530 Travel distances of linear axes: - X-axis: 2,700 mm - Y-axis: 1,000 mm (cross axis) - Z-axis: 1,050 mm Machine table: - Dimensions: 3300x1,000 mm - T-slots: 7 x 22 - Capacity: max. Axis speeds: - Max. feed rate X/Y/Z: 10,000 mm/min Milling head and spindle: - 2-axis diagonal milling head 1° x 2.5° - Max. spindle speed: 60 - 3,000 min-1 Fgedezu Nn Repfx Aptsg - Max. motor power: 22/30 kW - Tool holder: ISO 50 (DIN69872-B) Cooling and chip removal: - Chain conveyor in the longitudinal direction - Cooling through the spindle, 19 bar Other equipment features: - Movable control panel in front of the machine - Enclosure with front-side doors - Machine documentation

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS Fodpfxoh Stzkj Aptogg CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Year of construction: 1999, condition: good (used), Bobst SP 102E II, ref. 3041 – Year of manufacture: 1999 Fedjzxa Shspfx Aptsgg – Max. format: 1020 × 720 mm – Min. format: 400 × 350 mm – Max. speed: 7,500 sheets/hour – Caliper range: 80–2,000 gsm – Raised machine height: 46 cm, maximum stack height 174 cm – Counter: 191 million sheets – Retrofitted central lubrication system for the chain and drive cams. – Centerline

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm Fsdoq Nqkxjpfx Aptogg DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm Fsdpfx Apewl R Agjtjgg MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Fgjdpfjzuypljx Aptjg Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Fgedpfx Aszxqz Toptjg Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Fodpoxg Tfqsfx Aptegg

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm Fjdpfx Aewlwhcoptegg VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LASER TOOL SETTER

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Fodpjzl Screfx Aptjgg Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 12,04,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Fgodpozmh Awefx Aptsg Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 Fjdoh Hfrnjpfx Aptsgg PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: good (used), functionality: fully functional, machine/vehicle number: 901, travel distance X-axis: 370 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 405 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, table length: 500 mm, table width: 380 mm, spindle mount: MK 2, total height: 2,000 mm, total length: 1,590 mm, total width: 1,290 mm, quill stroke: 155 mm, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill. -Jig boring machine: including tool cabinet with various tools -Table dimensions 380 x 500 mm -Travel: Z 405 mm/Y 470 mm/X 370 mm -Quill stroke: 155 mm -Take: MK2 (plus outer cone for spindle tool) -Speeds: 75 - 2000 rpm -Machine dimensions: 1590/1290/H2000 mm -Machine weight: 1774 kg -Cabinet dimensions: 720/460/H1000 mm -Cabinet weight: 158 kg Price negotiable Rotary table shown in one of the pictures not included Worldwide shipping can be arranged at additional charges Fgedpfezrmf Ijx Aptjg

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Fedpfx Aezuykvsptegg Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Fedpfx Apey Ay Akstogg Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: excellent (used), Year of construction: 2006, CNC machining center with horizontal moving column, equipped with automatic tool changer, linear digital scales on X, Y, and Z axes, and Siemens 840D computer numerical control (CNC). Includes all standard machine equipment: Fsdpfoycxnkox Aptogg Travel: X = 1500 mm (60”) Y = 1500 mm (60”) Z = 810 mm (32”) Spindle speed range: 20 – 6000 RPM Operator station mounted on the platform with CRT display Portable pushbutton station for manual machine control Pushbutton for machine setup Platform-mounted safety door with electrical interlock Cartridge-type spindle with automatic power draw-in and quick-change system 90-tool oblong matrix tool magazine, double chain, mounted on the carriage for interference-free storage Tool chain guard with electrical interlock Tool change mechanism mounted on the carriage, transferring tools between the tool magazine and the spindle Complete assembly consisting of a double arm and its corresponding tool change mechanism, transferring tools from the magazine to the spindle and vice versa, operated by a hydraulic cylinder. Double arm. Rotation is powered by a hydraulic motor, and the in/out movement is operated by a hydraulic cylinder.

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm Fjdpfozz Hq Ajx Aptegg The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description Fgsdpjzgtzlsfx Aptsg For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Fgedpfxezgv U Us Aptsg Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Fsdezgvx Tjpfx Aptegg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Support and Girder Structure Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Fgedpfezrkwnjx Aptog