Used T 40 E for sale (99,305)

Condition: excellent (used), Year of construction: 2023, Capacity: Distance between spindle center and guides mm 220 Swinging diameter over bed mm 440 Swinging diameter over cross slide mm 230 Max. turning diameter over bed mm 400 Max. turning length between centers mm 1,000 / 1,500 Bed width mm 330 Headstock: Distance spindle center - bed mm 220 Spindle nose according to standard DIN 55027 Type C6 Spindle bore according to DIN 55027 mm 66 Godpfxoz Ai N De Akaeug Max. spindle speed rpm 3,500 3-jaw chuck diameter mm 250 3-jaw chuck bore mm 76 Spindle motor power S1 100% / S6 40% / S6 25% kW 10 / 14 / 17 Spindle torque S1 100% / S6 40% / S6 25% Nm 159 / 224 / 272 Tailstock: Travel of quill mm 120 Quill diameter mm 65 Internal taper MT 4 Control: HEIDENHAIN TNC 620 MANUAL PLUS Accuracy: Positioning accuracy mm +/- 0.010 on 1,000 Repeatability mm 0.010 on 1,000 General information: Dimensions (without control panel): L x W x H mm 2,500 x 1,600 x 1,800 Weight kg 2,500 Max. installed power kVa 16

Condition: excellent (used), Year of construction: 2015, operating hours: 55,201 h, functionality: fully functional, screw diameter: 70 mm, Technical advantages for the machine: - high performance and precision, - fully electric and energy-efficient, - rapid, dynamic, and highly precise movements thanks to a five-point toggle clamping system with low-friction platen guidance on precision linear bearings, - efficient injection unit ensures ultra-fast injection, - complete service documentation and operating manual, Guodpfx Akoxfbdxsajg - maximum energy efficiency through the consistent use of high-efficiency servo drive technology.

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Gujdpfx Aoylhkyjkasg Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution The machine is fully operational and in good overall condition.

Condition: excellent (used), functionality: fully functional, Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar distance h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum mold height: 375 mm Maximum mold height: 600 mm Maximum platen distance: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Injection volume: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 rpm Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500 KG Equipment • Screen text, German • Screen text, English • CEE socket, 32A • Hydraulic core pull, 2x • Hydraulic core pull unit • Air valve, 1x Gsdpfx Ajzyn Tpokajug • Machine with water manifold • Machine without material hopper • Machine without material conveying system • Needle-valve nozzle, pneumatically actuated • Leveling elements • Interface EUROMAP 63 • Interface EUROMAP 67 Handling • Interface for ejector plate locking • Schuko socket, 10A

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t Gujdsykvdljpfx Akajg

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Injection unit 1: Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Godpfsyyz Ddsx Akaoug Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Injection unit 2: 30 mm Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: used, Year of construction: 2017, overall weight: 140 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Godpfozz Axcox Akasug

Condition: good (used), Year of construction: 2009, ENGEL Emotion 440/100T Clamping force: 1000 kN Guedpfoyktp Sex Akajg Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Nozzle contact force: 40 kN

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Gsdpfey Hl Iyox Akaoug Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 2023, condition: new, pressure 40 t throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min Gjdop Udupepfx Akasug ram - range of adjustment 60 mm table surface area 650x380 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Sanding width 1100 mm Min. ÷ max. working height 4÷170 mm Gjdpfx Aoxwwgyekasug Sanding belt width 1115/1370 mm Sanding belt length 2150 mm 2 feed speeds 4.5-9 m/min Feed motor 0.45/0.8 kW Table adjustment motor power 0.25 kW Motor power (HP) for single or dual-head machines 11 kW (15) 50 Hz Operating pressure 6 bar

Condition: good (used), Year of construction: 2010, functionality: fully functional, 2-axis: Programmable X, R axis Bending length: 2100 mm Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Dimensions (LxWxH): 2900 x 1900 x 3050 mm Weight: approx. 5200 kg The machine can be inspected under power at any time. Gedpjya Dggjfx Akaeug

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Screw diameter: 40 mm Shot weight: 150 g Gedpfx Akjzypwpjaoug Shot volume: 165 cm3 \+ robot Sepro success 11 Type: Horizontal Drive: Electric

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 19800 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition Gusdpeyrhpvjfx Akaog • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, functionality: unexamined, Lutetia Tumbler T 40 Gsdpfxjzpg Uwe Akajug with defrost function.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Gedpfxezt R A Hs Akaoug Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Gujdpfx Aszcyqmskaeg

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Delivery time: by arrangement Gsdpfx Ajv S H Rhekasug Payment terms: 100% before taking delivery of the machine, net

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) Gedpezu A Rxsfx Akaeug * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) delivery time: on request Gjdpov S H Rbsfx Akaeug terms of payment: 100% prior to delivery

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Gsdpfx Aoztzqzjkaeug

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos Gsdpevvha Sjfx Akasug - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Godpfxeydqn So Akasug Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm Gujdpfezlgi Hsx Akasg • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gjdpfx Akjh Nypfsajug