Used Matsuura Fx 5 Pc2 for sale (58,611)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 981113378, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 518 Nm, workpiece weight (max.): 900 kg, total height: 3,267 mm, total length: 5,850 mm, total width: 4,860 mm, overall weight: 18,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 20,000 W, type of input current: AC, Equipment: documentation/manual, The manufacturing machine will be available in January 2026! Control type: YASNAC CNC control J300M. We are happy to assist you with inquiries by phone. Rcsdpfx Aew Sv Itsgujb

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, Rcedem H Uyzjpfx Agueb number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: used, Year of construction: 1991, operating hours: 2,000 h, Name: Used injection molding machine Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year built: 1991 Hours of operation: 2000 h Driving force: 15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Empty weight: 3400 kg Technical doc.: Yes Message: General Data: Dry cycle rate: 40 min, Pump drive: 15 kW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Displacement: 116 cm3, Screw stroke: 120 mm, Maximum part weight: 99 g, Maximum injection flow: 505 g/s, Calculated injection capacity: 15 kW, Plasticizing flow: 29 g/s, Screw length: 22 LID, Maximum screw speed: 430 min, Maximum screw torque: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle compression force: 65 kN Clamping unit: Clamping force: 500 kN, Mold opening stroke: 350 mm, tool installation height min.: 200 mm, platen distance max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm. Accessories: With two tool tempering devices. Condition: Second hand Price: By request Redpfx Agexl R Sxeuocb

Condition: good (used), Year of construction: 1988, - Year of construction: 1988 - Membrane: PVC, 2019. Redpfxsv Uw U Aj Aguecb - Stainless steel cage, semi-perforated - Frame: Made of steel, on castors - Mesh size: Stainless steel, Friedrich connection no. 2 40 - Central filling Dimensions: - Length: 3400 mm - Width: 1750 mm - Height: 2300 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Rcedow N Iz Hspfx Agueb Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: used, mileage: 2,71,300 km, power: 235 kW (319.51 HP), first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Mercedes Benz * Antos 2533 6x2 * Seitenlader Zoeller SLF XL - 28 * Automatik Getriebe * Federung: Blatt/Luft/Luft * Zentralschmierung * AD- Blue * Staubox * Sonnenblende Rcedow Rthbepfx Agueb * Rückfahrcamera * C-Trace * Liftachse * Lenkachse * el. FH * el. Spiegel * Multifunktionslenkrad * Reifen 315/80R22,5 ca. 50-30-30% * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Year of construction: 2003, condition: used, Pbt 25 pc 200 obtained by trade-in Machine's really in new condition! Hour counter is at 622 hours!!!   the picture&#39,s say enough. , Rodpfxjf Rih Dj Aguocb JWV Service is an importer for the Netherlands and Belgium of PBT profile rolling machines and dealer of Meba band saw machines, Faccin plate rolling machines and various other brands. The team of JWV Service has 25 years of experience in troubleshooting and overhauling metalworking machines. Look up for more machines.

Year of construction: 2017, condition: excellent (used), Pallet Changer. The concept of this is to provide totally hands-free pallet exchange and Premier have made constant improvements to this system over the last 10 years to make it the versatile unit it is today. A great number of Pallet Changers sold to date have been to the pharmaceutical industries and although it is the most expensive machine in Premier's inverter range, it has proved to be ideal in eliminating manual handling. Can handle loads up to 2050mm high, 1500 kgs weight. Floor fixed guards with photobeams at the front. Handles all conventional sized pallets. To totally avoid manual handling, two pallet stackers can be placed to the side of the Pallet Changer. Rcedpfxjp Am Shs Agusb

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) Rjdpfx Aextp Hwsgujcb SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools WEIGHT 52T

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Rcedpfx Agoxv Ayvjusb Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V Rcsdpfx Agshkr Anoueb

Condition: not inspected (used), functionality: unexamined, total width: 1,200 mm, total length: 3,000 mm, total height: 1,500 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Rsdpey D Tl Ujfx Agujcb Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Overall length: 3,000 mm Overall width: 1,200 mm Overall height: 1,500 mm Machine weight: 2,000 kg External reference: 41

Year of construction: 1970, condition: not inspected (used), functionality: unexamined, overall weight: 2,000 kg, total length: 3,000 mm, total width: 1,200 mm, total height: 1,500 mm, machine/vehicle number: 779, No reserve price – guaranteed sale to the highest bidder! Rcsdpsy D Tkdefx Aguob Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Diameter: 5.4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,200 x 1,500 mm Machine weight: 2,000 kg External reference: 40

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor Rsdpfsy Thlnjx Aguscb 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, power: 56 kW (76.14 HP), Country of origin: China - Japan Standards Displacement: 5,204cc Dimension: 3,170 x 1,450 x 2,450 Brakes: Service: Hydraulic , Parking: Hand gross weight: 7,240 Gearbox type: Power Shift Lights-Front Combination Lights & Rear Combination Lights Mirror-Rear View Mirror (Right & Left Sides) Toyota - Side shift fork hang on Yellow strobe light Front combination lights Tilt cylinder hole boots High load backrest (flat steel type) Orange Seat belt Back up buzzer Rear pillar assit grip Rear view mirror right & left sides UNIT INDICATION mm/kg Long Forks - 1520mm Led rear working light (selective lightning condition) Rear combination lamp less System of active stability (SAS) Cyclone air cleaner (dual elements) Pre-cleaner Anti-restart ignition key switch Floor mat Cooling fan guard WIDE VISIBLE MAST (V) - 4500 MM OR WIDE VISIBLE MAST (FSV) - 3700 mm Rcedpfxoy Tylas Agujb Operator Presence Sensing System (OPS) Neutral Safety Switch Rated Capacity: 5000 kg - 8FD50N) Load Centre: 600 mm Steering : Power Steering Free Lift : 830 (With Load Backrest) Mast Type: 3 Stage Full Free Lift Mast Mast Lowered Height: 2200mm Mast Extended Height: 5135 mm (With Load Backrest) Overhead Guard Height: 2200 mm Carriage Type: Side Shift Carriage Lever: 3 Lever Fork Length: 1520 mm Tyres: Solid = More information = Number of cylinders: 6 Fuel tank: 120 litres

Condition: used, functionality: fully functional, mileage: 2,57,039 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Rcsdpfx Agey Uv Eleueb Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Rjdpfx Agjy U Hw Ejujcb Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: used, functionality: fully functional, mileage: 3,98,842 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Rcsdpfx Ajy T Hmwjgujb Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,714 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel Forklift Rjdpey U A Ndsfx Aguecb Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: DOOSAN D25S diesel forklift - 2.5 ton lifting capacity - year of manufacture: 2012 - side shifter - TRIPLEX free lift mast - overall height: 2.17 m - lifting height: 4.80 m - 12,714 operating hours according to the meter - forklift with 4-cylinder YANMAR diesel engine, 49 HP - mechanical hydraulic levers - solid rubber tires front approx. 70%, rear approx. 50% - LED work lights front and rear - simple, mechanical forklift - good condition - front loader can be inspected on site - affordable delivery options!! Features: Side shifter, 3rd valve, rear work light, front work light, heating, full cab.

Condition: used, functionality: fully functional, mileage: 4,08,054 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Redpfxjyz Tpzo Agujcb Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14 Rcodpfx Ajw Idhmjgueb

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Rjdpfex A Tkxox Aguscb Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm Rcodey H Ncbopfx Agujb - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Rjdpfxswiatie Aguocb Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: good (used), Year of construction: 1999, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 800 mm, spindle speed (max.): 14,000 rpm, total height: 3,720 mm, total width: 4,520 mm, total length: 7,200 mm, For sale is a high-performance CNC machining center (milling center) with a moving column. It is in fully functional condition. Please note the integrated high-speed vertical spindle with up to 14,000 rpm as well as the powerful SIEMENS 840D CNC control with an integrated rotary table for complex multi-axis interpolation. Technical data: Year of manufacture: 1999 Control: Heidenhain TNC 430 X-axis: 1,200 mm Y-axis: 700 mm Z-axis: 800 mm Rapid traverse: 30,000 mm/min Working feed rate: continuously variable, max. 30,000 mm/min Spindle speed: continuously adjustable 100 – 14,000 min⁻¹ Max. drive power: 25 kW Max. torque: 250 Nm Speed: 14,000 rpm Tool holder: HSK A 63 Tool magazine: 92 positions Integrated rotary table dimensions: 800 x 700 mm Max. workpiece size: Ø 900 mm Machine dimensions: 7,200 x 4,520 x 3,720 mm Weight: 17,500 kg Equipment & accessories included in the offer: Rodpfx Aszadi Isgujcb Automatic central lubrication Chip conveyor Coolant tank / coolant supply Accessories not included: Clamping devices, zero-point clamping systems, chip containers, tool holders On request, transport and loading can be arranged throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.