Used Mep Shark 282 Nc Evo for sale (4,727)

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm Iaedsl R Nnnspfx Aizew

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides Iajdexwufaspfx Aizjw - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Condition: used, Year of construction: 2007, MEP Shearline Flexiplus Isdeymb T Depfx Aizoaw Very good condition, stored, only 1,000 hours of operation Year 2007 Cutting capacity: up to 36 mm Cutting capacity: Up to 36 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Iaodpfx Aszldqnjizew Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment Iaedpfx Aisgmhxaszjw SPRING DISCOUNT

Year of construction: 2023, operating hours: 4 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10220, The hyCLEANER® red EVO I cleans different forms of façades, surfaces and materials: very gentle, effective, fast and above all, economic. The machine works with highpressure water and does not need any electrical connection. Both, the glass and the frames are cleaned simultaneously. All water leading elements are made out of stainless steel. Purified-water can be used and the glass surfaces dry up, leaving no streaks behind. A further advantage of hyCLEANER® red EVO I is the running wheels. They do not leave Iasdpoxnlz Hofx Aizow any marks on the surface of the façade - gentle cleaning can be so easy!

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW Iajdpfjyyqm Ijx Aizjw 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable,...

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Iaedpfx Aieyudidozsw

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right Iedevu Hghjpfx Aizoaw and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, ...

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control Ijdpfxovu Hfqj Aizjaw > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently have used...

Condition: used, Year of construction: 2003, machine/vehicle number: MR2TTR23099, AVAILABLE from Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm Iaodpfxezmh Ers Aizew - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Iaodpfxsxpi Dus Aizjw Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,706 h, load capacity: 2,500 kg, lifting height: 5,960 mm, fuel type: diesel, mast type: triplex, construction height: 2,570 mm, power: 30 kW (40.79 HP), Equipment: cabin, lighting, sideshift, trailer coupling, Linde H25D-02 EVO diesel forklift Year of manufacture: 2017 According to the hour meter: 5,706 operating hours Lifting capacity: 2.5 tons Overall height: 2.57 meters Lifting height: 5.96 meters Power: 30 kW - Triple mast with free lift Iaodpfjzi Iq Hex Aizew - Side shifter - Lighting system - Full cabin Selling price: 15,500,-- net Affordable delivery also possible!

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Ijdpfx Aisv Ux R Sjzsaw

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, CNC vertical machining center DECKEL MAHO DMU 50 eVo linear With Heidenhain iTNC 530 path control system Year of manufacture: 2008 Travel ranges: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm, stepless (HSK 63) With the following accessories: 2-axis NC swiveling rotary table, 500mm x 380mm clamping surface Vertical tool changer with 30 magazine positions (HSK 63) Full protective enclosure with sliding doors and interior lighting Electronic handwheel 3D measuring probe Renishaw OMP 60 Tool measurement in the work area (BLUM laser) IKZ 40 bar with paper band filter Operating mode 3 + 4 Chip conveyor Signal light, 4 colors Rotoclear Compressed air supply for linear measuring systems Coolant system Chip flushing gun Ijdpfx Aiszlty Sszeaw 4 adjustable machine feet Operating manuals

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. Iedpfszb Iuqox Aizjaw -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Ijdpsxlkg Aefx Aizjaw Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. Iaedpfx Ajx Tr R Ueizew – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm – Max. film roll dimensions: Ø 300 × 800 mm – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK REPLAY 40 EVO Iodpfox Tqf Djx Aizeaw The Minipack Replay 40 EVO is a mobile, manual shrink film packaging machine with hood, ideal for small to medium batch sizes. ▢ Mobile, manual shrink film packaging machine with hood ▢ Output up to 300 units per hour ▢ Usable sealing bar dimensions: 420 × 280 mm ▢ Max. product dimensions: 400 × 250 × 160 mm ▢ Max. film roll size: Ø 250 × 500 mm ▢ Working table height: 925 mm ▢ Machine dimensions (closed): 1,160 × 700 × 1,120 mm ▢ Machine dimensions (open): 1,160 × 700 × 1,220 mm ▢ Machine weight (net/gross): 90 / 111 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 35 Iedsx Tr Igepfx Aizsaw The Minipack Replay 35 EVO is a manual hood shrink wrap machine designed for small production volumes where space is limited. Manual tabletop shrink wrapping machine Power supply: 230 V, single-phase (optionally 120 V) Installed power: 2.0 kW (230 V) / 2.25 kW (120 V) Maximum current: 8.6 A (230 V) / 19 A (120 V) Sealing bar usable dimensions: 380 × 250 mm Maximum product dimensions: 350 × 240 × 140 mm Maximum film roll dimensions: Ø 200 × 350 mm Machine dimensions (closed): 935 × 620 × 540 mm Machine dimensions (open): 935 × 620 × 540 mm Machine weight (net/gross): 49 / 63 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 55 EVO The Minipack Replay 55 EVO is a manual shrink film packaging machine with hood, designed for medium production volumes. – Throughput up to 300 units per hour – Usable sealing bar dimensions: 540 × 390 mm – Max. product dimensions: 500 × 380 × 200 mm Iajdpfx Aiex Tr N Djzew – Max. film roll dimensions: Ø 250 × 600 mm – Working table height: 925 mm – Machine dimensions (closed): 1,260 × 810 × 1,165 mm – Machine dimensions (open): 1,260 × 810 × 1,310 mm – Machine weight (net/gross): 105 / 126 kg

Condition: excellent (used), machine/vehicle number: H2X391J02229, Year of construction: 2018, load capacity: 1,800 kg, lifting height: 5,220 mm, 2018 Linde H18 Evo Compact Counterbalance Forklift Iedpfozkhlmjx Aizoaw

Condition: used, Year of construction: 2009, operating hours: 28,600 h, functionality: fully functional, machine/vehicle number: 10915566124, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,800 kg, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 eVo 5-Axis Universal Machining Center Machine Brand: DMG MORI Model: DMU 50 eVo Linear Year: 2009 Control: Siemens Sinumerik 840D Technical Specifications * Machine Type: 5-Axis CNC Universal Machining Center * Simultaneous 5-Axis Machining * Travels (X / Y / Z): 500 × 450 × 400 mm * NC Swivel Rotary Table * Table Diameter: Ø630 mm * Maximum Table Load: 300 kg * B-Axis Swivel Range: -5° to +110° * C-Axis Rotation: 360° * Maximum Workpiece Diameter: Ø630 mm * Maximum Workpiece Height: 500 mm * Rapid Traverse (X / Y / Z): 24 m/min * Spindle Speed: 15,000 rpm * Spindle Taper: SK40 * Main Spindle Power: 19 kW * Maximum Torque: 130 Nm * Tool Magazine: 30 Positions * Maximum Tool Diameter: 80 mm (130 mm with adjacent pockets free) * Maximum Tool Length: 300 mm * Maximum Tool Weight: 8 kg * Direct-Drive Spindle * Roller Linear Guideways Iajdpfx Aiezl Rxxjzjw * Precision Ball Screw Drives * Digital AC Servo Drives * Automatic Tool Changer * Through-Spindle Coolant Preparation * Flood Coolant System * Central Automatic Lubrication System * Electronic Handwheel * Rigid Tapping * Helical Interpolation * High-Speed Machining (HSC) * Full Machine Enclosure * Machine Weight: Approx. 7,500 kg * Machine Dimensions (L × W × H): Approx. 2,600 × 2,400 × 2,900 mm

Condition: used, Year of construction: 2009, operating hours: 42,787 h, functionality: fully functional, machine/vehicle number: 10915566134, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,800 kg, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 eVo 5-Axis Universal Machining Center Machine Brand: DMG MORI Model: DMU 50 eVo Linear Year: 2009 Control: Siemens Sinumerik 840D Technical Specifications * Machine Type: 5-Axis CNC Universal Machining Center * Simultaneous 5-Axis Machining * Travels (X / Y / Z): 500 × 450 × 400 mm * NC Swivel Rotary Table * Table Diameter: Ø630 mm * Maximum Table Load: 300 kg * B-Axis Swivel Range: -5° to +110° * C-Axis Rotation: 360° * Maximum Workpiece Diameter: Ø630 mm * Maximum Workpiece Height: 500 mm * Rapid Traverse (X / Y / Z): 24 m/min * Spindle Speed: 15,000 rpm * Spindle Taper: SK40 * Main Spindle Power: 19 kW * Maximum Torque: 130 Nm * Tool Magazine: 30 Positions * Maximum Tool Diameter: 80 mm (130 mm with adjacent pockets free) * Maximum Tool Length: 300 mm * Maximum Tool Weight: 8 kg * Direct-Drive Spindle Iodpfx Aszl Rvqsizoaw * Roller Linear Guideways * Precision Ball Screw Drives * Digital AC Servo Drives * Automatic Tool Changer * Through-Spindle Coolant Preparation * Flood Coolant System * Central Automatic Lubrication System * Electronic Handwheel * Rigid Tapping * Helical Interpolation * High-Speed Machining (HSC) * Full Machine Enclosure * Machine Weight: Approx. 7,500 kg * Machine Dimensions (L × W × H): Approx. 2,600 × 2,400 × 2,900 mm

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW weight of the machine ca. 4500 kg Isdpfxst Abrws Aizeaw