Window production centre

WEINIG Unicontrol 6 NC-Spindeln

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Ksdpfx Adevu Hfqobjnd Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: used, Year of construction: 2003, High performance planer Weinig type Hydromat 23 Planing and moulding machine Weinig Hydromat 23 for four-sided planing and moulding of wood with feed rate up to 100 m/min. Original data of the machine, technical modifications reserved. - spindles: 8 - Spindle arrangement: 1. bottom 18,5 kW // 6.000 rpm // flight circle 125 - 180 mm // counter bearing 2. right 22 kW // 6.000 rpm // flight circle 112 - 250 mm 3. left (22 kW) // 6.000 rpm // flight circle 112 - 250 mm 4. top (22 kW) + chamfering unit // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 5. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 6. top (22 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 7. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 8. universal (11 kW) // 6.000 rpm // flight circle 112 - 200 mm - Spindle diameter: 50 mm - Working width: 20 - 230 mm - Working height: 12 - 160 mm - Feed 22 kW // approx.: 8 - 100 m/min Knsdpoup Av Defx Adbod - Year of manufacture: 2003 - ATS system - Drive for horizontal spindles via toothed belts - 5 driven rollers in the table - Air cushion system in the machine table - Short infeed table with driven 4 rollers - 400 V // 50 Hz

Condition: new, Holzkraft minimax me 35 t s edge banding machine 5507235 For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm and workpieces from 8 - 50 mm Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10" large touch screen: HMI Maestro Active Edge; Graphic display of all machining units and their operating status; Graphic simulation of machining operations; Control of all machining units; Regulation of glue pot temperature; Assistance functions for setting up the machine according to the machining program; Error diagnostics for quick correction of simple errors; Statistics on machining parameters; USB connection; Preparation for network connection. Excellent accessibility to the working units thanks to the large hood that ensures protection and noise reduction Monobloc steel construction ensures high stability and rigidity of the machine Automatic aggregate positioning when changing the slab thickness Automatic application of strip edges with edge magazine (me 35 t s): The strip edges of solid wood are automatically loaded and synchronized with the panel guide Panel feed is made by feed chain with rubber glides Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 3314mm width/depth (product) approx. 1085mm Height (product) approx. 1300mm weight (net) approx. 545kg Flush radius milling unit Flush radius milling unit Input power 2 x 0,35kW Flush radius milling unit Cutter diameter HM 55,3mm flush radius milling unit cutter speed 12000min¯¹ flush radius milling unit suction port diameter 2 x 60mm Electrical data Supply voltage 400V Mains frequency 50Hz Glue unit Glue tank input power 0,25kW Glue pot working temperature 190°C Glue tank suction port diameter 60mm Ksdpfx Ajkknbqjdbjnd Glue tank filling capacity 0,8kg Pneumatic connection Working pressure 6,5bar Feed Feed input power 0,55kW Feed speed 7m/min Edges edge thickness roll material 0,4 - 3,0mm edge thickness strip material 0,5 - 5mm Pre-milling unit Pre-milling unit suction nozzle-Ø 2 x 80mm Pre-milling unit power input 3kW Pre-milling unit cutter speed 7200min¯¹ Pre-milling unit diamond cutter-Ø 80mm Pre-milling unit cutter height 56mm Pre-milling unit material removal 0,5 / 1 / 1,5 / 2mm Scraper aggregate Radius scraper 2mm Buffing aggregate buffing unit input power 2 x 0,14kW buffing unit speed 2800min¯¹ Workpiece workpiece thickness 8 - 50mm Workpiece length min. 120mm Workpiece width min. 110mm Holkraft dealer - accessories available on request!

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment Ksdev N D E Rjpfx Adbond - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: new, Year of construction: 2025, 🏆 Upgrade Your Sawmill with the Ultimate Wravor WRC 1250 AC Line! 🏆 🚀 Unmatched Performance – Precision Cutting – Maximum Efficiency 🚀 🔹 Complete Sawmill Solution – From log handling to final cutting, timber sorting, stacking etc. 🔹 Cuts Logs Up to: Ø 1250mm & length: adjusted to customer's demand 🔹 Fully Automatic & Hydraulic System on band saw WRC 120 AC – Fast centering, turning & clamping system on sawbed, full hydraulic equipment on sawhead Knjdev Id Tljpfx Adbsd 🔹 High-Performance Horizontal Band Saw with Sew drive with steel ropes for moving forward-backward, 🔹 Smooth & precise cutting 🔹 Integrated Multi-Rip Circular Saw 20-160 and/or 40-200/250 – Maximized lumber output 🔹 Heavy-Duty Log Loading & Sorting System – Seamless production flow 💡 Why Choose Wravor? ✔️ High-Speed Processing for maximum productivity ✔️ Advanced Automation & Hydraulics ✔️ Minimal Waste, Maximum Yield ✔️ Proven Reliability – Sawmills Worldwide Trust Wravor! 📩 Contact Us Today! Get your customized sawmill solution with the Wravor WRC 1250 AC Line and boost your production!

Condition: reconditioned (used), Year of construction: 2002, Longitudinal profiling machine for parquet 4+4 motors Minimum working width 80 mm M+F profile Knedsvxz Syepfx Adbjd

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Dimensions (L/W/H) 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31 also for window production ----- Machine is cleaned and functionally checked ! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- Kodpfsvnv Uzsx Adbond First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm Ksdsqprk Tspfx Adbsnd - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Knedpfx Adstq U A Ijbod

Condition: new, Year of construction: 2025, combustion chamber power: 175 kW Kodpfei Hplrex Adbsnd Working power: 140 kW Diameter smoke outlet: 200 mm Hot air delivery pipes: 1 x 500mm Firebox length: 950 mm Firing chamber width: 600 mm Firebox height: 860 mm Air delivery : 8900 m³/h Power consumption : 3500 W designed for room volume : 3000 m³ area to be heated: 500/600 m² furnace height without hot air conveying pipes: 2200 mm Furnace width: 930 mm Furnace length without flue gas fan: 1700 mm Weight: 615 kg