Used Mica V Mix 100 Neu for sale (53,251)

Condition: used, mileage: 33,153 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, In good condition and fully functional, with no pending repairs. +++ Vehicle is ready to drive ++ Power steering ++ 7.5 tons possible with an H-certificate +++ Ncodpfx Aozmqncjflow Recent inspection including brake fluid change, lubrication, and fuel filter replacement. In addition, the air dryer cartridge and windshield wipers will be replaced. Both starter batteries have been renewed, and the fluid levels of all components have been checked and topped up if necessary. The windshield washer system will be upgraded to an electric pump with a push-button. The exhaust system will be overhauled, with the last pipe being replaced. This 1113 runs very well and is ready to drive without any issues. 9 seats (6 seats possible with private registration as a truck), All-wheel drive 4x4, central and rear differential locks, trailer hitch with ring eye 1.5t Transfer case with off-road reduction and differential locks, Walk-in equipment box with equipment holders, Wheelbase 4200 mm +++ Maximum speed according to documents = 85 km/h, actual speed with GPS 88 km/h Interior cabin dimensions from behind the driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 GVWR is 9.0t - Changes, prior sales, and errors excepted - ?080?

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Ncsdpfxjzc Rhvs Aflew Accessories: ruffler and special press ram

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46003, Technical characteristics: Ncjdpfx Afsxw Ub Ielow Work Area # Maximum diameter of the clamping plate: 220 mm # Maximum turning diameter: 170 mm # Maximum machining diameter: 170 mm # Maximum workpiece length: 100 mm # X-axis travel: 495 mm / Rapid feed in X: 48 m/min # Z-axis travel: 250 mm / Rapid feed in Z: 30 m/min # Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle # Spindle interface to DIN 55026: Size A5 # Maximum speed: 7000 rpm # Power at 100% duty cycle: 23 kW # Torque at 100% duty cycle: 130 Nm Powered Tool Turret # Turret type: VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter # Number of stations: 12 # Maximum speed: 4000 rpm Electrical Equipment # Operating voltage: 400 V, fuse protection 80A GL # Connected load: 41 kW Dimensions # Total dimensions: Length = 3913 mm, Width = 2160 mm, Height = 2955 mm # Weight: 6500 kg Main Features and Capabilities: # Vertical design: Optimal chip evacuation and easy loading/unloading # CNC control: Siemens 840D SL # High precision: Positioning in X and Z axes via Heidenhain linear encoders # Main spindle - Manufacturer: Weiss, providing high power and wide speed range # Automated loading/unloading: Integrated automation supplies and removes parts # In-process probe: Marposs T25 # Live tooling: Allows drilling and milling operations in addition to turning # Chip conveyor: Knoll # Coolant filtration and cooling: Knoll KF150/950 paper filtering unit # Fire suppression system: Kraft & Bauer # Electrostatic oil mist filter: IF Vario EC1500 Machine status: WORKING

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46001, Technical characteristics: Work Area - Maximum clamping plate diameter: 220 mm - Maximum turning diameter: 170 mm - Maximum machining diameter: 170 mm - Maximum workpiece length: 100 mm - X-axis travel: 495 mm / X-axis rapid traverse: 48 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Standard enclosed automation (number of loading positions by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle (DIN 55026): Size A5 - Maximum speed: 7000 rpm - Power at 100% duty cycle: 23 kW - Torque at 100% duty cycle: 130 Nm Tool Turret with Driven Tools - Turret VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter - Number of stations: 12 Nodpfjxw Ufysx Aflecw - Maximum speed: 4000 rpm Electrical Equipment - Supply voltage: 400 V, 80A GL fuse protection - Connected load: 41 kW Dimensions - Total dimensions (L×W×H): 3913 × 2160 × 2955 mm - Weight: 6500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision: X and Z axis position accuracy via Heidenhain linear scales - Main spindle by Weiss: High power and broad speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - In-process control probe: Marposs T25 - Driven tools: Enables drilling and milling operations - Chip conveyor: Knoll - Coolant “paper” filtration & chiller unit: Knoll KF150/950 - Fire suppression system: Kraft&Bauer - Electrostatic mist collector: IF Vario EC1500 Machine status: - Working

Condition: used, maximum load weight: 2,110 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2017, next inspection (TÜV): 04/2028, total width: 2,485 mm, total height: 2,400 mm, * Harbeck 6853 Cable Transport Trailer 2.7 t - 2 axles - new TÜV inspection - * Overall length: 4,466 mm - Width: 2,485 mm - Height: 2,400 mm * Permissible total weight: 2,700 kg - Unladen weight: 590 kg - Payload: 2,110 kg * German vehicle - German registration certificate - immediately available - * Please arrange an appointment to view * Contact: Mr. Andreas Vogel * The information provided online serves as a non-binding description. Nedpey Rg R Rjfx Afljcw * They do not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors, and prior sale.

Condition: used, mileage: 50,599 km, power: 115 kW (156.36 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,510 kg, maximum load weight: 990 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 07/2026, color: white, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 3, loading space volume: 15 m³, loading space length: 4,680 mm, loading space width: 1,740 mm, loading space height: 1,900 mm, Year of construction: 2024, Equipment: ABS, air conditioning, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, color: White IC 194, unladen weight: 2,510 kg, permissible total weight: 3,500 kg, cargo area (L x W x H): 4,680 mm x 1,740 mm x 1,900 mm, 1st axle: 225/65 R16, leaf spring suspension, 1 x airbag, digital tachograph, ball-type tow hitch, electronic stability program (ESP), traction control system (ASR), automatic climate control, height-adjustable driver’s seat, front passenger bench, radio, DAB digital radio reception, USB port, Bluetooth hands-free preparation, rear parking sensors, power steering with City function, adjustable steering column, electric windows, outside temperature display, electrically adjustable and heated exterior mirrors, immobiliser, central locking with remote control, tinted windows, wooden load compartment floor, high plastic wall lining in cargo area, rear doors with 260° opening angle, daytime running lights, cup holders, pre-installation for 12V 13-pin trailer socket. Two rows of Airliner lashing rails on the side walls. Engine start-stop system. Central storage compartment with USB charging port. Technical inspection and servicing prior to vehicle delivery, including new TÜV and service as per maintenance schedule. Optional at extra cost: 1-year Intec Premium Plus used vehicle warranty and dent removal. For further information, please contact Jan Furtak. Phone . Subject to errors and changes. Sale to trade customers only. Former rental vehicle. Ncsdpfxjyl A Nde Aflow

Condition: used, mileage: 96,948 km, power: 85 kW (115.57 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 3,520 mm, next inspection (TÜV): 06/2026, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 10 m³, loading space length: 3,130 mm, loading space width: 1,740 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, cruise control, traction control, CERTIFIED PRE-OWNED Standard model, color: White IC 194, permissible total weight: 3500 kg, cargo area (L x W x H): 3,130 mm x 1,740 mm x 1,900 mm, 1st axle: 225/65 R16, seats: fabric, leaf spring suspension, 1 x airbag, electronic stability program ESP, anti-slip regulation ASR, driver's seat adjustable in height, passenger bench seat, radio, digital radio reception DAB, USB connection, hands-free Bluetooth system, adjustable steering column, electric windows, outside temperature display, outside mirrors electric and heated, central locking with remote control, tinted glass, partition, cargo area floor: wood, cargo area wall lining: high-quality plastic, rear doors with 270° opening angle, spare wheel, daytime running lights, cup holders, speed limiter: 160 km/h, business package, preparation for trailer socket 12V 13-pin. Parabolic spring reinforced on the rear axle. Grab handles on the A-pillar. Central storage compartment with USB charging port. Maintenance service performed according to time intervals, and new TÜV inspection prior to vehicle handover. Optionally available for an additional charge: 1-year used car warranty Intec Premium Plus with deductible. Dent removal is possible optionally for an additional charge. For any questions, Jan Furtak is available. Tel. Errors and omissions excepted. Sale only to commercial customers. Formerly a rental vehicle. Ncodpfxsykcyyo Afljw

Condition: used, mileage: 98,556 km, power: 368 kW (500.34 HP), first registration: 08/2023, fuel type: diesel, energy efficiency: A, CO₂ emissions: 2 g/km, fuel consumption (urban): 25 l/100km, fuel consumption (extra-urban): 25 l/100km, fuel consumption (combined): 25 l/100km, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of seats: 2, Adaptive Cruise Control (ACC), ZF Intarder, auxiliary heater, automatic climate control, multifunction steering wheel, disc brakes, differential lock, 78-liter AdBlue tank, Euro 6e emissions standard, AEBS (Advanced Emergency Braking System) emergency brake assist, passenger seat armrests, ASR (Anti-slip Regulation), automatic light function and rain sensor, COMFORT PLUS PACKAGE, roof and side spoilers, ECO roll function, electronic braking system (EBS), ESP (Electronic Stability Program), cab with electric tilting function, suspension: air suspension with 2 air bellows, transmission: 12-speed ZF Traxon automatic gearbox, rear axle 12 t, fuel tanks 600 + 450 L, refrigerator, LDWS (Lane Departure Warning System), Ford Ecotorq 12.7L engine, multimedia system with 7.2" touchscreen & truck navigation system, upper sleeper bunk with overhead storage compartment at rear wall, premium air-suspended driver’s seat with lumbar support, tire size: 315/70 R 22.5 | 2.47 axle ratio, tire size: 315/70 R 22.5, radio and infotainment system, wheelbase: 3,600 mm, SAF fifth wheel coupling with 1,100 mm coupling height, external sun visor, fuel tank side panels on both sides, front axle 8.0 t, predictive cruise control (route-based) Ncjdpfjwv Ap Hox Aflow Note Despite careful verification of all our price labels, errors may still occur. In some cases, these are caused by transmission errors in the systems of various platform providers. We also cannot rule out mistakes originating on our part. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. A displayed price cannot be declared as a binding part of the contract. If you place particular value on a specific feature in our listing, please inform us of this when concluding the contract. We thank you for your understanding!

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,100 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table width: 560 mm, table length: 1,400 mm, rotational speed (min.): 20 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,500 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG MORI CMX 1100 V / 2017 / HEIDENHAIN TNC 620 All repairs and maintenance work have been performed promptly. The machine is well-maintained, fully functional, and ready for continued operation. We are selling it solely due to our planned purchase of a new machine tool and our established process of regularly updating our machine park. We currently have four DMG MORI milling machines, and the machine offered here is the seventh machine tool of this brand in the history of our company. Ncsdpfx Aoy I A Duoflew We can confidently recommend this machine. Throughout its service life, it has been used in our facility and has been consistently maintained in good working order. The buyer will receive a tested machine tool, ready for immediate integration into further production. The machine is still connected to the power supply, so we invite you to inspect and test it on site. Key specifications: Manufacturer: DMG MORI Model: CMX 1100 V Year of manufacture: 2017 Control system: HEIDENHAIN TNC 620 Travel in X/Y/Z: 1100 / 560 / 510 mm Table: 1400 × 560 mm Spindle speed: 20–12,000 rpm New spindle installed in November 2024 Operating hours of the new spindle: 3500 hours Total operating hours of the machine: 60,300 hours Program operating hours: 33,000 hours Spindle taper: SK40 DIN 69871 Tool magazine: 30 positions + 120 positions external magazine Linear scales in X/Y/Z axes Wireless HEIDENHAIN measuring probe Chip conveyor Electronic handwheel Coolant tank: 250 l Machine weight: approx. 5830 kg

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Car transporter REPO R2P – Top quality for safe vehicle transport! This trailer is the ideal solution for the safe and professional transport of: Construction machinery and excavators, as well as other vehicles ✅ Robust and durable construction ✅ High stability and safety during transport ✅ Perfect for private and commercial use Njdpeyqyf Tjfx Afljcw This car transporter impresses with its quality, reliability, and well-thought-out design – ideal for anyone who wants to transport their vehicle safely to its destination. Technical specifications: • Brand: REPO • Type: Vehicle transporter • Permissible total weight: 3500 kg • Tare weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5290 mm • Width: 2100 mm • Loading area length: 3500 mm • Vertical load: 150 kg The trailer is in absolutely new condition and is ready for immediate use. Location: Rheda - Wiedenbrück Price: €4,390 net plus VAT If you are interested or have any questions, please do not hesitate to contact us! An on-site viewing is possible by arrangement.

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system Ncsdpfx Afeir Imyslow - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix also available as geared variants

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21071601, input voltage: 380 V, power: 6.05 kW (8.23 HP), Sinmag mixer, entirely made of stainless steel, with a 100L capacity. Nodpfezpfnpsx Afljcw Equipped with a bowl, a whisk, a spiral beater, a paddle, and 1 scraper.

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 Njdpfjtq Ngbox Aflocw BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2460428, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, fuel type: electric, tire size: 0,41 x 0,13 m, color: red, Equipment: UVV, Manitou 100 VJR Telescopic Mast Lift Technical Specifications: * Working height: 9.90 m * Platform height: 7.90 m * Load capacity: 200 kg * Overall width: 0.99 m * Overall length: 2.82 m * Overall height: 1.99 m * Weight: 2,650 kg Equipment: * Proportional control joystick * Drive possible at maximum outreach * Audible warning signal and indicator light for tilt and overload * Integrated battery charger * Manual emergency lowering * Negative brake * Audible warning system in the work basket * Hour meter * Battery charge indicator * Crane lugs * Integrated diagnostics system * Non-marking tires * Work platform with anti-slip perforated floor * CAN-BUS technology * Toolbox in the work basket Optional features available: * New CE inspection (UVV) * Removal of our company decals * Custom paintwork and decals on request * New batteries * Warranty * New service Nedpfx Afezmf E Aoljcw * Delivery within Germany

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2460108, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, tire size: 0,41 x 0,13 m, color: red, transport length: 2,800 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Motor: Electric (2 x 1.5 kW) Working height: 9.85 m Platform height: 7.85 m Max. lateral outreach: 3.15 m Ncsdpfx Afozmfm Holsw Basket capacity: 200 kg Upper carriage rotation: 350° Platform dimensions (L x W): 1.11 m x 0.93 m Overall dimensions (L x W x H): 2.80 m x 0.99 m x 1.99 m Boom length: 1.50 m Weight: 2,650 kg Climbing ability: 25% Travel speed: 0.65 km/h - 5 km/h Fully operational, general signs of use

Condition: used, mileage: 29,100 km, power: 107 kW (145.48 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 20 m³, loading space length: 4,230 mm, loading space width: 2,100 mm, loading space height: 2,230 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Mobile: WhatsApp Office: Email: Vehicle location: Geistenbecker Str. 125, 41199 Mönchengladbach Renault Master box van L4 with Dhollandia 750kg tail lift Very well-maintained vehicle, first owner Accident-free Air conditioning Cruise control Navigation system Camera Service booklet available 6-speed transmission 3-seater Radio Electric windows Central locking + remote Power steering ABS, ESP, ASR Start/Stop system LED lights Rain sensor Bluetooth Electronic immobilizer On-board computer Comfortable driver's seat Euro 6, green environmental badge New TÜV/emission test Total weight 3500 kg Payload 980 kg We always have approximately 30 vans in stock: box vans, box vans with tail lift, tipper trucks. Just call or come by! Of course, you can have the vehicle inspected on our lift by your own mechanic or our master technician. We can also arrange transfer plates for you for the transport of the vehicle. Favorable financing or leasing options up to 60 months, results in 60 minutes. We will gladly accept your vehicle as a trade-in. A warranty of 12-24 months is possible. Errors and prior sale excepted. You can reach us from Monday to Saturday from 9:00 a.m. to 8:00 p.m., and on Sundays by prior appointment. Nsdpfxjzngv Es Aflocw

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,838 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2020. It features an X-axis travel of 1100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a clamping area of 1400 x 560 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 120–630 mm • Clamping area: 1400 x 560 mm • Spindle power: 13 kW (40% DC) / 9 kW (100% DC) • Spindle torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool magazine: 30 pockets (double gripper, loaded through spindle, programmed via control panel) • Max. tool diameter: 80 mm (130 mm with free adjacent pockets) • Max. tool length: 300 mm (from spindle face) • Max. magazine load: 120 kg Nsdpfezibzxox Afljcw • Feed drives: AC drives with ball screws • Feed rate (X/Y/Z): 30 m/min • Rapid traverse (X/Y/Z): 30 m/min Additional equipment • Renishaw tool probe • Renishaw workpiece probe • Clamps/workholding set Technical Specification Taper Size SK 40

Condition: used, mileage: 67,967 km, power: 129 kW (175.39 HP), first registration: 04/2024, fuel type: diesel, empty load weight: 4,017 kg, maximum load weight: 3,183 kg, overall weight: 7,200 kg, axle configuration: 4x2, wheelbase: 5,100 mm, next inspection (TÜV): 07/2027, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 34 m³, loading space length: 6,006 mm, loading space width: 2,495 mm, loading space height: 2,325 mm, Equipment: air conditioning, cruise control, tail-lift, Color: White IC 194, unladen weight: 4017 kg, permissible total weight: 7200 kg, cargo area (L W H): 6,006 mm x 2,495 mm x 2,325 mm, cargo area volume: 34 m³, seats: fabric, leaf-spring air suspension, 1 x airbag, tail lift, electronic stability program (ESP), passenger bench seat, radio, adjustable steering column, electric windows, electric and heated exterior mirrors, central locking with remote control, tinted glass, pre-wiring for trailer socket 12V 13-pin, air conditioning compressor 170ccm, preparation for telematics system, previously a rental vehicle, errors and changes excepted. Nsdpfjzl H Ebox Afljcw

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Njdpfx Afsziizaolecw Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Ncedjyf Hihspfx Aflsw Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: ready for operation (used), functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 6,512 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. Njdpfx Aszm Ew Ssfljcw We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: used, mileage: 1,07,322 km, power: 120 kW (163.15 HP), first registration: 06/2012, fuel type: diesel, overall weight: 2,973 kg, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * First owner * Air conditioning * Long version L2 * Parking sensors * New TÜV inspection (German vehicle inspection) Nodpfszm Dxhox Aflocw Special features: Airbag (passenger side), Parking Package, Exterior mirrors electrically adjustable, heated, and foldable, Parking assist (rear), Visibility Package, Automatic headlight activation, On-board computer Additional features: Airbag (driver side), Battery 50 Ah, Double passenger seat, Anti-slip regulation (ASR), Rear double doors without glazing, Body/structure: Van, Exterior mirrors electrically adjustable, heated, and foldable, Parking assist (rear), Cargo protection grid behind driver, Steering column (steering wheel) mechanically adjustable in height and length, Model refinement, Engine 2.0 L - 120 kW HDi FAP, Wheelbase 3122 mm, Side impact protection strips, Spare wheel with regular tires, Low emissions according to Euro 5 emissions standard (PSA = L6), Sliding door (right) without window, Front left seat adjustable in height, Seat cover/upholstery: Fabric, Additional brake light

Condition: ready for operation (used), operating hours: 4,028 h, functionality: fully functional, machine/vehicle number: WB843-2, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,990 kg, next inspection (TÜV): 11/2026, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, number of seats: 1, number of previous owners: 1, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1650 sweepers, first owner Engine inspection including oil, oil filter, and fuel filter will be carried out free of charge upon sale Machine version with a new pedal system 1,960 sweeping operating hours 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf suction hose (rare) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Nodpfx Afozmzk Ujljcw Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cabin with air-sprung driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawn mowers (not included) Errors, changes and prior sale reserved. We only sell under our general terms and conditions and with the exclusion of all warranties. Errors, changes and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale reserved!

Condition: used, mileage: 59,945 km, power: 88 kW (119.65 HP), first registration: 11/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Renault Maxity platform GSR aerial work platform - Work platform type: GSR E179T - Hydraulic drive - Max. working height: 12,50m - Tower rotation 450° - Max. Basket load: 200 kg, 2 persons - Control from the basket or with the remote control - ABS - Driver airbag - Central locking - Manual gearbox - Electric windows - Reversing camera - 4x hydr. outriggers Ncodpfx Aovihqqefljw First-hand vehicle, in very good technical and optical condition. All CE certificates, COC documents and UVV tests available. 21 full approval, UVV and German approval possible. Renault Maxity GSR High worker - Working platform type: GSR E179T - Hydraulic drive - Max. Working height: 12.50m - Tower rotation 450 ° - Max. Basket load: 200 kg, 2 people - Control from the basket or with the remote control - ABS - Driver airbag - Central locking system - Manual transmission - Electric windows - Backup camera - 4x hydr. support Truck from firsthand in very good technical and optical condition. All CE, COC certificates and UVV tests available. Renault Maxity GSR con cesta elevadora - Tipo de cesta elevadora: GSR E179T - Impulsión hidráulica - Altura máxima de trabajo: 12,50 m - Torre de rotación: 450° - Carga máxima de la cesta: 200kg, 2 personas - Control desde la cesta o con el control remoto - ABS - Airbag del conductor - Cierre centralizado - Transmisión manual - Elevalunas y Espejos eléctricos - cámara de respaldo - 4x estabilizadores hidráulicos Único dueño, muy buen estado técnico y óptico. Certificados CE,COC y pruebas UVV disponibles. - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano Subject to errors and prior sale. All information without guarantee.

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DN-80-100-PPV -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 320/95/H125 mm Ncjdpfxjffk Iqo Afljw -Weight: 4.8 kg