Used Neue Walzen / New Rollers for sale (27,334)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. Fpedpfx Aasyug R Rstsl The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: T7-165S, Brand New Holland Models T7.165S Type Agricultural Tractor Year 2018 Excellent condition Power 165 HP RM Number 4 RM Number of hours 4300 h Gearbox type Semi-automatic gearbox Transmission name RANGE RECOMMENDATION Air conditioning Yes AV equipment Rel PdF AV equipment Front suspension axle Yes Suspended cabin Yes Number of distributors 4 distributors Front dimensions 540/65R28 Rear dimensions 650/65R38 Front wear (%) 70% wear Fpedpfxewq A Aps Aatjl Rear wear (%) 70% wear (AR)

Condition: used, Hofmann under-table milling machine Spindle adjustable up and down, and at an angle from -25 to +45 degrees, electrically Interchangeable spindle shank, diameter 40mm Long tables, 270cm with extension Culaga adjustable electrically with AIGNER fences 4-roller feed system Fodpfjzh E Uasx Aatspl Spindle speed continuously adjustable from 1000 to 10,000 rpm 11KW motor Left-right rotation Spindle lock Brake The machine has a new, non-original control system. The milling machine is in working condition and ready for operation.

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused Fpsdpfx Aasziviketjl -CE marking -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted.

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer Fodpfx Aezwylrsatjpl KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos Fpodpfx Aaoy Awzketsl With 1 piece square pin HS-Code: 8462 5900

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system Fpsdszxgf Uepfx Aatol

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 500 h, Sublimation machine for wood effect on aluminium profiles. Fodpfx Aasu Td Izjtspl the machine has 11 places for profiles and is totally functionable and ready for use.

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Fedpfjv Nv Taox Aatspl Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system Fodpjzyghljfx Aatjpl • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) Fpjdpfx Aaev Ebf Hotel - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece)

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account Fjdpfjx E Rdwex Aatjpl - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, grinding width: 650 mm, Equipment: type plate available, Kündig Botop, sanding unit on top roller, pneumatic shoe, sanding unit on bottom roller, pneumatic shoe. Machine has been completely overhauled, new carpet, new rollers. Fpodpfx Ajvmt D Reatel

Condition: good (used), You are bidding on: a branded machine set – a folding machine from a renowned and well-known manufacturer – Schechtl HA and a guillotine shear RAS by Reinhard Maschinenbau Sindelfingen. Machine details: Folding machine: - Die rail bends cleanly – test possible on site - Angle display - Bending length slightly over 2.5m - Sheet metal capacity: 1.5 mm for steel – also suitable for aluminium, zinc, etc. - Standard die rail - Foot-operated closure - Current new price approx. €20,000 net Guillotine shear RAS: - Electrically operated guillotine shear up to 2mm steel – also suitable for aluminium, etc. - Cutting length: 2.5m - Extension table for special applications included in the price – can be mounted on the left side - Optional spare blades available - Adjustable depth gauge from the front Fpsdpfx Aasyqytqstel - Many additional onsite tools and auxiliaries available as options - Machines can also be purchased individually Important: Optionally, you will also find a wide range of machines and equipment for sheet metal and steel processing on offer in our shop, including various rails, depth gauges – everything relating to bending and shearing, such as press brakes, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, round rollers for gutter fabrication, back gauges, etc.), as well as hand tools and spare parts from many top manufacturers in stock. Please feel free to contact me for any questions. You will receive an invoice in accordance with § 25a UstG, VAT is included in the invoice amount (margin taxation system). Free loading available – approx. weight: bending machine about 1900 kg, shear about 1600 kg. Inspection and testing are possible and encouraged by prior phone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Folding machine RAS 251009

Condition: used, Year of construction: 2003, Wedge ring roller front serrated disks (new) / Fpodpfetqd Tlex Aatjl

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Fodpfsw Tfzfjx Aatepl

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module Fjdpfx Ajzyz Erjatjpl – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: new, Year of construction: 2019, working width: 1,600 mm, Trailed land roller with hydraulic wheel assembly Fedpfex I Du Iex Aatjpl Working width: 160 cm Condition: New Year of manufacture: 2019

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm Fpedpey Erwfsfx Aatel - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: used, power: 175 kW (237.93 HP), next inspection (TÜV): 10/2026, Year of construction: 2010, operating hours: 11,658 h, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulics, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating warning lights * 1 aluminum diesel tank * 1 AdBlue tank EXCHANGEABLE FLATBED * Separate exchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side panels * Rear and side panels * Detachable front grille, mountable at the front on the loading area * Tie-down points in the loading floor * Support stands with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side panel height: 402 mm * Volume: approx. 2.03 m³ BODY * Jotha CombiCon 4520 U quick-change system * Year of body construction: 2010 * Lifting, lowering, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Year of snowplow construction: 2006 TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * Euro 5 Fpedpfx Aaszq Ivlstol * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CAB / DRIVER'S CAB * Air conditioning * Heated windshield * Rearview camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Tare weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT and weight adjustments are available upon request. We won't leave you alone even after the purchase: We will help you obtain export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us - we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to change, errors, printing and typesetting errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we accompany you personally and reliably - from the first contact to the delivery of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in the organization of special transports. Export and short-term license plates We will help you obtain export or short-term license plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle transport On request, we will organize the transport of your vehicle.

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Year of manufacture: 2021/2022 Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting stretch film offers you the following benefits: - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Fpsdpfx Aaowb A N Rjtel Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: 916xxxxx, Year of construction: 2018, operating hours: 1,776 h, load capacity: 2,000 kg, lifting height: 125 mm, fuel type: electric, fork length: 1,600 mm, empty load weight: 890 kg, total length: 2,474 mm, drive type: Elektro, construction width: 760 mm, Low-lift truck Chassis number: 916xxxxx Load center: 800 Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load roller, polyurethane, single Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2026 Description: Serviced, technically and visually refurbished, safety inspection passed, a new battery will be ordered and installed before delivery (photos show the workshop battery), no warranty/liability for defects Impulse control, initial lift, electric steering, operator presence system (foldable seat), discharge indicator, hour meter, battery (will be installed NEW) with Aquamatik, external charger included Fpsdpfx Aaezxu Ikjtol

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 1,757 h, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 250 mm, cutting width (max.): 250 mm, control type: NC control, overall weight: 1,700 kg, Equipment: documentation/manual, For sale is a KASTO KASTOtwin A2 fully automatic bandsaw from 2008. The machine was in use until recently, has been regularly maintained, and operates reliably. It will be thoroughly cleaned before collection. Technical specifications: Manufacturer: KASTO Type: KASTOtwin A2 Fjdpfx Aaozyarwetspl Machine No.: 6459 104 007 Year of manufacture: 2008 Control system: KASTO BasicControl Connection: 400 V / 50 Hz, 3~ Connected power: 5.0 kW / 16.0 A Weight: approx. 1,700 kg Operating hours (control system): 3,756.6 hours Operating hours (saw): 1,702.9 hours Total number of pieces cut: 12,480 Equipment: Roller conveyor 4,100 mm Chip conveyor Coolant system Several new, unused saw blades included Operating manual and documentation available The machine can be inspected and demonstrated in operation after prior arrangement. Loading is possible without any problems; a forklift is available on site. Invoice with VAT shown. Sold as a used machine, excluding any warranty, guarantee, or right of return.

Condition: used, Year of construction: 1987, Edge and profile sanding machine with new feed beltused, great condition, little used, top equipmentMake ArminiusType ST-4Year of construction 1987Machine no. 1948Belt feed with top pressure rollers and support roller conveyorapplication-controlled sanding pad that can be exchanged for a profile sanding bodyProfile grinding spindle with infinitely variable speed controlGrinding spindle 28 x 90 mm1.5 kW / max. 1,500 plessWorkpiece passage height 0-100 mmMotor 1.5kWMotorized oscillation 0.02 kWVeneer edge grinding device with controlled shoefront table approx. 500 mm x 1350 mmUnit tiltable 0-90°Belt length 1600 mmBand width 150 mmBelt speeds infinitely variablemobilemiter gaugeRound edge grinding deviceInfinitely variable feed system - belt feed with top pressure 5-25 m/e tiltable 0-90°New price approx. €25,000.00Suction connection 100 mmSpace requirement approx. 1350 mm x 930 mm x 1100 mmWeight approx. 280 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenWithout guarantee and guarantee Fpsdpfx Asvwfx Ioatjl

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers - Spare parts Fpodpfxsxnb Iis Aatsl - Control cabinet - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland