Used Pcb Assembly for sale (3,351)

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane Gusdoihiiispfx Ahajf 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). Gusdpfx Asibx S Nehaof St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, This listing is for 1 of 4 Kinbio Tech YK1225-Shanghai Assembly Roller Conveyor Gjdpfxexzg H Do Ahaeuf

Condition: used, This listing is for a Kern PCB 250-3 Balance. Gedpfjxx Atzex Ahasuf The unit is in full working condition and is ready for immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,500 kg, We are offering this new RUBIX assembly machine, year of manufacture 2025. I am a professional in the industrial sector, offering my services as an industrial premises developer. During a relocation and the construction of a new platform, my client RUBIX transferred to me some new, packaged hydraulic and pneumatic equipment after discontinuing this activity from their range of industrial equipment supply. Therefore, I am offering for sale a batch of equipment as listed in the attached document: hydraulic pumps, hoses, and fittings. I can provide a sales invoice and offer an attractive price for the lot, which is valued at €43,000 (excluding VAT). Gedpoyc Eudjfx Ahaeuf I remain available to discuss with you according to your interests. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Welding or assembly table, 2760mm length x 1960mm width x 360mm height, plus legs total 4500kg. Gjdpfovdklgox Ahajuf

Year of construction: 2003, condition: used, SCHNELL Idea 12/25 assembly machine Gujdpfxoymb Nrs Ahaof Machine recently dismantled in working order, production stopped. 3 payoffs Payoffs: 3

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 365 kg, total height: 1,900 mm, Manufacturer: APC by Schneider Electric Model: Upsilon STS 600 Article No.: 3400488000 Serial No.: RJ-93PM04007 Year of Manufacture: (to be confirmed, approx. 2006–2007) Gujdpfx Ajw Tbi Eehaef Location: United Kingdom Technical Specifications Rated Current: 600 A Input Sources: 2 independent mains inputs Input Voltage: 380–400 V, 50/60 Hz Output Voltage: 380–400 V, 50/60 Hz Output Phases: 3W + N + PE Height: 1900 mm Condition Decommissioned from a data centre Professionally maintained, excellent working order Available for inspection upon request

Condition: new, Kontron CP603 PC board, serial number: 248072028, unused, 100% functional, scope of delivery as shown in the photos. Guodpfsi Ebwpjx Ahajf

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Guedpfxjt Ac Efs Ahasf Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: ready for operation (used), Maho Philips PC Board 4022 224 6886.7, used, normal signs of use, 100% functional, scope of delivery as per photos Gsdepqb Ecepfx Ahajuf

Condition: new, Baldor A.S.R. Servotron EPCPNM30-1C circuit board in opened original packaging, 100% functional. Gedpfx Ahoi D T Drjaouf

Year of construction: 2025, condition: new, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external influences such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and reproducible, which is essential for quality and reliability in serial production. Transport System Transports PCBs through the machine (inline or stand-alone). Coating Application Depending on the configuration: - Spray coating (selective or full coverage) - Jet coating - Film or mist application techniques XYZ Positioning and Motion System Provides precise control of the spray valve. Vision and Camera System (optional) For alignment, inspection, and process monitoring. Masking / Selective Coating Protects connectors, test points, and other areas not to be coated. Drying or Curing Module For UV, thermal, or air curing, depending on the coating material. Control Software Programmable for various PCB designs and coating recipes. Suitable Coatings - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial control systems - Medical equipment - Aerospace - Consumer electronics Advantages - Consistent and high coating quality - Reduced material waste - High repeatability Gjdpjydnlhofx Ahaeuf - Suitable for mass production - Improved reliability and lifespan of electronics

Condition: used, This listing is for the Agilent PCB1500 Water Peltier System. The unit is in full working condition and ready for immediate use. Designed for precise thermal regulation, it provides stable and efficient temperature control for sensitive lab processes. Ideal for integration with analytical instruments requiring consistent cooling performance Transparency Report and Technical Audit: Gujdjyz Aquspfx Ahasf • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2020, 2 units available! Rear-mounted shelving system with 4 shelves, 650x300 mm, and 4 support arms for long parts. Perforated back panel. Workplace lighting. Height adjustment system via handwheel (fine adjustment in 5 mm increments per revolution). Gedpfx Ahszab Smsajuf Pneumatic clamping device for clamping individual profiles for hardware assembly, 180° swiveling, with locking in 30° increments, locking pneumatically actuated. Clamping position adjustable in the longitudinal direction of the profile. Clamping range for profiles with a construction depth of 45-120 mm and a working width of 50-150 mm, each adjustable in 7 mm increments. 4 pneumatic connections, 5 electrical connections, 2 holders for hand drills or screwdrivers, etc., mounted on a sliding tool drawer. Drawer extends across half the table width on the right.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 7.50.1081, Schneider & Koch AOI TS-LV6 / LaserVision Twin LV6 Automated Optical Inspection System (used 2D/3D AOI for SMT circuit boards, fully functional, manufactured approx. 2014–2016, for precise inspection of components, solder joints, and paste) Test technology: Schneider & Koch Model: TS-LV6 Guodjyid Duepfx Ahaef AOI unit Fully operational

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Guodpey Sv S Hefx Ahasf

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. Gusdoxtfqxopfx Ahaef • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software Guedpjzlx E Tsfx Ahaof 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology Godpfshgr Ihjx Ahajuf The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Gusdpfjhgfnbjx Ahaef Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Gujdjhgg Rrjpfx Ahaof Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: Nr. 291, used inline automatic 3D solder paste inspection system (AOI) for SMT. Fault description: Error in solder paste printing. Year of manufacture 2013 used inline automatic 3D inspection system (AOI) for assembled PCBs. Faults: Component misplacement, bent pins, etc. Multiple units available. Years of manufacture 2013–2016 ----- Please quote your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland ----- Technical specifications according to handout. No packaging; any warranty rights are excluded. If you intend to dismantle the equipment yourself, please indicate this accordingly in your bid. We assume no liability for the accuracy of the technical data, for the completeness of accessories and tooling, Gujdpfx Aew Dfh Ijhaof or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: Zeile 270, used inline automatic 3D X inspection system (AOI) for assembled PCBs. Defect types: misalignment, bent pins, etc. Multiple units are available, manufactured between 2013 and 2016. Gedjwzv Itspfx Ahajuf ----- Please indicate your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. ----- Technical specifications can be found in the handout. Without packaging; all warranty rights are excluded. If you intend to dismantle the equipment yourself, please mention this in your offer. We make no guarantees regarding the accuracy of technical data, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as outlined in accident prevention regulations.

Condition: ready for operation (used), machine/vehicle number: 95 202 74, This listing includes a fully operational, complete DELO DELOLUX UV curing system, consisting of: DELOLUX pilot A4T control & power supply unit 2× DELOLUX 20/400 A2 LED area lamps (400 nm) Mounting brackets, integrated cooling, and all original high-quality cabling DELO is one of the world’s leading manufacturers of industrial UV curing systems used in electronics, optics, medical device assembly, precision bonding, and automated production lines. This system provides extremely high-intensity, uniform UV illumination over a large area, perfect for high-speed adhesive curing and automated processes requiring absolute stability and repeatability.  Included Components 1) DELOLUX pilot A4T Control & Power Unit Model: A4T Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 1.45 kW Fuse: T16 A / 250 V User Interface: Large touchscreen display (Login, Admin/User profiles) Control Ports: PLC 1–4 (digital control inputs) Function: Central control, monitoring, and power delivery for LED heads 2) Two LED Heads – DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination Area: 112 × 112 mm Perfect uniformity for industrial curing processes Both heads include mounting brackets + 280 cm cable each Technical Specifications UV LED Heads (each): Model: DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination area: 112 mm × 112 mm Serial Numbers: included on the labels Cable length: 280 cm Control Unit (A4T): Model: DELOLUX pilot A4T Input: 100–240 V AC Power: 1.45 kW Fuse: T16A Port outputs: Up to 4 LED heads Power cable length: 180 cm Condition Fully working, tested with both LED heads Bright output, even intensity Cosmetically excellent No damage to connectors, filters, or LED arrays Perfect for: Industrial adhesive curing, electronics production, display manufacturing, PCB assembly, medical device fabrication, optical bonding, and automated UV curing stations. Cable Lengths (included): Power cable (A4T): 180 cm LED head cables: 280 cm each Thank you for considering our surplus machining and electrical items for purchase. These items have been in our company's stock for several years, but they are in functional condition. Due to the length of time they've been in storage, some of the items may show signs of aging or wear on the packaging, but the contents are in excellent condition. We want to be transparent about the condition of these items, so please note that the packaging may be slightly damaged, discolored, or have markings from storage. However, this does not affect the functionality of the items inside. We have inspected all of the items and can confirm that they are in functional condition. We will take great care in packaging and shipping your order to ensure that it arrives in the same condition as it was when it left our facility. If you have any questions about these items, please don't hesitate to contact us. Thank you for your interest! Gusdpfx Ahsx Emqgjasf