Used Plan - Mafi 11 for sale (16,223)

Condition: excellent (used), Year of construction: 2021, operating hours: 1,926 h, variable screw compressor ALMIG F-DRIVE 8 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2021 Operating hours: 1926 Bh Technical specifications Type: F-Drive 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0,16 to 1,32 m³/min at 6 bar (g): 0,20 to 1,27 m³/min at 7 bar (g) : 0,23 to 1,21 m³/min at 8 bar (g) : 0,27 to 1,16 m³/min at 9 bar (g) : 0,27 to 1,11 m³/min at 10 bar (g) : 0,31 to 1,05 m³/min at 11 bar (g) : 0,31 to 0,99 m³/min at 12 bar (g) : 0,33 to 0,95 m³/min at 13 bar (g) : 0,38 to 0,89 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 660 mm Width: 690 mm Height: 1586 mm Weight: 356 kg Visit our store. Fsdpfjuz T N Hox Ap Dspn We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm Fodpfx Apjhtryxe Djpn -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: new, Year of construction: 2025, Trough belt, impeller wheel, shot blasting system, 11 kW, directly driven impeller turbine with 8 throwing blades. Belt width 1000 mm and diameter 900 mm. Fpedpohvikuofx Ap Den

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Fjdjhwwyropfx Ap Djpn Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Telemecanique, Variable Speed Drive Altivar 11 frequency converter Fsdsh Hrt Dspfx Ap Depn -Type: ATV11HU18M2E -Power: 0.75 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph : 200/230 V -Frequency: 0.5-200 Hz -Dimensions: 135/70/H143 mm -Weight: 1 kg

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives Fodpfoihpg Esx Ap Dopn - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Condition: good (used), Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 -Power: 11 kW -Speed: 1440 rpm -Voltage: 380 V -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 Fpjdpfx Aoia Rp Nop Djn -Number: 2x motors available -Price: per piece -Dimensions: 525/288/H330 mm -Weight: 88 kg/unit

Condition: refurbished (used), Model 11 completely overhauled Designation: CNC miter saw line Paul MKL or K or KE, as desired Manufacturer: Paul Year of manufacture: General overhaul with the latest technology Condition: Like new Technical data: Cutting width 150 mm Cutting height 85 mm Saw blade diameter: 450 mm Saw motor 5.5 kW Infeed length as desired CNC Maxi 5 control with optimization Sorting conveyor as desired Fpedpfx Asb Rl I Hep Den Machine completely overhauled, all bearings new, motors new, with the latest energy-efficient technology, control new, saw arm new.

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Power: 0.8/11/11 kW 60/818/4500 rpm -Speed: 60/818/4500 rpm -Shaft: Ø 48 mm Fpsdpedx Aivjfx Ap Dsn -Number: 2x motors available -Price: per piece -Dimensions: 330/330/H875 mm -Weight: 230 kg

Operating hours: 1,015 h, condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm Fsdpfx Ajfcw Twep Depn -Dimensions: 1300/400/H820 mm -Weight: 270 kg

Condition: used, Gear motor, electric motor, three-phase motor -Handover: as is as on pictures -Fixing: damaged -Power: 2.2 kW -Speed: 11 rpm Fpodpfx Aoffakbsp Don -Shaft: Ø 60 x 120 mm -Construction: B3 -Protection class: IP55 -Dimensions: 745/340/H345 mm -Weight: 119 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Fjdoq H Shcepfx Ap Dspn Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means. Fsdpfx Aoq Ngb Djp Dspn

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. Fsdoq Nyuvjpfx Ap Dspn 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle, support clamp, flange clamp, support clamp -Pipe elbow/support clamps: 11 p. / 82 pcs. -Type: various versions, see photos/parts list Fsdpfjq N E R Rjx Ap Dopn -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H200 mm -Weight: 189 kg

Year of construction: 2005, condition: good (used), Storage silo for animal feed -Storage of grain maize -Gross capacity approx. 1811m³ -Gross capacity approx. (800 kg/m³) 1449 t -Silo diameter 9.39 m -Cylinder height 26.67 m -total height 28.56 m -Stainless steel roof -High silo made of steel with PERMAGLAS (glass-fused steel plates) -Roof with central hatch and additional roof inspection hatch -Pressure and vacuum valves, inspection hatch in the silo ring -climbing ladder, roof ladder -Static requirements 1000 kg/m³, class II-B -Stored goods: Whole grain maize/CCM or wet grain in unground state Fjdpsp N Dvmsfx Ap Dopn Removal with Haake system (liquid grinding with stainless steel hammer mill, no moisture limitation)

Condition: excellent (used), Year of construction: 1998, Double end tenoner Homag 4+4 motors Opening side 2500 mm Feeding speed 4-24 m/min. Fsdpjrcbccefx Ap Dopn Perfect for panels, windows, furniture

Condition: good (used), scrubber-dryer, floor cleaning machine, mop, gearbox -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 .: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm Fpjdskx Srijpfx Ap Dsn -Weight: 4.7 kg/pc.

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head Fpsdpfxjb A N Uzs Ap Den -Recording: SK50 Minimum bore diameter: 100 mm -Max. bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg

Condition: good (used), geared motor, electric motor -Speed: 25 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm Fedpfx Apjb A Rnqe Dspn -Protection class: IP 65 -Weight: 14 kg

Condition: good (used), geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 3x geared motors available Fedpfob A Rnwox Ap Dopn Price: per piece -Weight: 20 kg

Year of construction: 1986, condition: used, • Working length (mm): 3200 • Drilling units: 3 from below, with a 3-spindle drilling head • Clamping cylinders: 2 from above Fpsdpj Drmxsfx Ap Dsn • Pressure cylinder: 1 on the side • Control system: Siemens, newer model

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Fpedpjzbt Aaofx Ap Don

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. Fsdpfszdtflsx Ap Depn The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Heidenhain UV 106 ID 366572-11. The costs only cover the repair analysis of your component, which you can send to us. After examination of your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis fee will be waived. Your component will be completely overhauled as part of the repair and will come with a three-month warranty from us. Fpsdpfx Aoy Nrldjp Djn