Used Elmag for sale (69)

Condition: ready for operation (used), Year of construction: 2015, Main Drive Spindle motor power 3000 W Tool taper ISO 40 Additional Equipment Feeds X/Y: 20 - 360 mm/min Feed Levels X/Y: 8 Rapid Traverse X/Y: Prjdsw Saxvepfx Ab Iod Feed Z: 400 mm/min Feed Drive X/Y: 550 W Feed Drive Z: 750 W This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2017, functionality: fully functional, grinding length: 630 mm, grinding width: 330 mm, electro magnet plate coolant device Technische Daten / technical details: gr. Schleiflänge / max. grinding length 630 mm gr. Schleifbreite / max. grinding width 330 mm Magnetspannplatte / magnet clamping plate 630x300 mm Längsweg Tisch / longitudinal travel table 765 mm Schleifscheibenabmessungen / grinding wheel dimensions 400x40x203 mm Antriebsleistung / drive capacity 7,5 kW Gewicht der Maschine / weight 2800 kg Prodpfx Absudv Hwj Iod Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set Pjdpjxykafofx Ab Isrd - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Year of construction: 2005, condition: excellent (used), I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Prjdpfx Abjiuc R Hj Ijd Weight: 4000kg Available immediately. Fully working.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz Prsdpfju Nhh Tox Ab Ijd - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: new, ELMAG Hydraulic sheet metal shears HGS-A 2100x6mm -CybTouch 8 control unit -hydr. cutting gap adjustment -backgauge 1000mm -illumination of the cutting line -safety light barrier 'rear' Standard equipment Prjdpet Hg Npsfx Ab Ijd - Upper and lower knives also for stainless steel processing - Hydraulic cutting gap adjustment - Upper blade with two cutting edges, special hardened steel beam - Bottom blade with four cutting edges, special hardened steel - Cutting gap adjustment device - NC-controlled backgauge with recirculating ball screw - Cutting line lighting - Automatic hold-down system - CE safety devices - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control unit with color touchscreen - Mobile control column with foot release and emergency stop button - Operating instructions / CE Special accessories - Angle stop with scale - Sheet metal holding device type I or type II - Support arm length up to three meters, with ruler - Laser cutting line indicator - Finger protection light curtain - CNC HGS-A with CYBELEC DNC 61 G control unit ADVANTAGES High quality standards Robust industrial models from state-of-the-art production High cutting accuracy Welded, very stable and stress-free monoblock steel construction steel construction with excellent vibration damping S275 material with very high tensile strength High-quality BOSCH-REXROTH or HOERBIGER hydraulic system Low-noise ATOS hydraulic pumps with high pressure capacity Powerful hydraulic cylinders honed and chrome-plated Upper blade with two cutting edges, special hardened steel Lower blade with four cutting edges, special hardened steel Central cutting gap adjustment for quality cuts of different material thicknesses and types NC-controlled, motorized, precisely adjustable back gauge with recirculating ball screw High adjustment speed 110 mm/s, adjustment range 1,000 mm Back gauge with automatic reset Cutting line lighting Automatic hold-down system with high holding force for support and tilt safety during the cutting phase CE safety devices Installed safety through cutting gap cover Light barrier on the rear of the machine Emergency stop button on the machine and on the control column TECHNICAL DATA Cutting length 2100 mm Cutting capacity 42 kg/mm² 6 mm Cutting capacity 70 kg/mm² 4 mm Cutting gap min. / max. 0.05 - 0.8 mm Number of strokes 28 1/min Hold-down device 11 No. Hold-down pressure 9 t Main drive Motor power 11 kW Backgauge Motor power 0.75 kW Backgauge adjustment range 1000 mm Adjustment speed 110 mm/s Cutting angle 1.2 ° Table length 2415 mm Number of support arms 2 Width without support arms 2410 mm Transport width 2100 mm Table height 800 mm Oil tank volume 150 l Length 3010 mm Width 2410 mm Height 1640 mm Weight 4250 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 7281, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units Podpfx Ajtz Dgzsb Iord - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm Prjdjvdld Ropfx Ab Iod total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation

Condition: new, Year of construction: 2024, For sale is a robust ELMAG EUROREEL AIR 15 automatic hose reel 42181 with metal housing. The all-round reel is still unused and therefore in new condition. Technical data: Prjderpl S Uspfx Ab Isd - 15 m hose length (PU) Ø 8x12 mm + 2 m supply line - Max. working pressure 15 bar - With Euro-standard coupling (¼") - Weight 8 kg - Free shipping The reel is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms, reel, hose reel Reference: ZEL-42181

Condition: excellent (used), I sell the 2-cylinder roller coater Superfici Elmag FVR. Working width 1400mm Very good condition. Fully working. Pjdpfx Aoiuc R Rob Iord Available immediately.

Year of construction: 2005, condition: not inspected (used), ROLLER COATER WITH ULTRAVIOLET DRYING ELMAG COMBI-VAL S3 OF OCCASION TECHNICAL FEATURES: - Folded and welded steel structure. Prodpfxshknc Ns Ab Isd - TOTAL LENGTH OF 5.800 MM - Product applicator roller - Ultraviolet drying - Year 2005

Condition: used, Year of construction: 2020, ELMAG ROTAIR compressor, performance: flow rate 1600 L/min, pressure 8 bar, air connections, engine: HONDA GX 690, gasoline, weight 220 kg, vehicle may be covered with advertising and/or lettering. Prsdpfjwm Ub Nex Ab Ijd Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, Year of construction: 2009, Driven roller conveyor with PVC-coated transport rollers for transporting workpieces. Power transmission via flat belt via transmission shaft. Absolutely smooth running even at high feed rates, feed frequency controlled. Technical data: - Year of manufacture 2009 - Transport length: 2,500 mm - Working width, usable: 1,300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 64 mm - Roller pitch: 125 mm - Adjustable feed rate (manual): 3-15 m/min - Installed power: 0.37 KW Predpfx Abjumvlms Isd

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V Psdskxhqnopfx Ab Ijrd total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, ELMAG oil/diesel heating gun with chimney flue TURBOHEAT ODK 32 ADVANTAGES Heating guns with indirect combustion through chimney flue for closed rooms/halls or also for tent heating etc. Combustion with very high efficiency Stainless steel combustion chamber Safety switch-off in the event of flame/fan failure and overheating Desired temperature easily adjustable via rotary knob incl. 10 meter temperature sensor for measuring the room temperature Predpot Hvw Nsfx Ab Iod TECHNICAL DATA Output 30 kW Air output 1100 m³/h Fuel consumption (heating) 3 l/h Tank capacity 50 l Mains voltage 230 V Flue gas connection Ø 110 mm Air outlet Ø 23 cm Dimensions LxWxH 1080x445x495 mm Weight 26.2 kg

Condition: used, Year of construction: 2021, ELMAG ROTAIR compressor with HONDA GX 690 engine, performance: flow rate 1600 L/min, pressure 8 bar, air connections, weight 230 kg, vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Podpfx Aswm Ub Aeb Ijrd Please contact us!

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min Podpoumvmkefx Ab Iord - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm Pjdpfxjvdld Do Ab Ijrd turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V bore capacity in steel 16 mm throat 169 mm quill stroke 50 mm turning speed range - drilling 50 - 2250 U/min spindle drive 0,5 kW total power requirement 0,75 kW weight of the machine ca. 0,175 t dimensions of the machine ca. 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, ELMAG Portable Powerstation ENERGY 2400, LiFEPO4 battery with 2232Wh ENERGY 600 - 2400 The new ENERGY series comprises 4 performance sizes of portable power stations for a mains-independent power supply and emergency power supply for your consumers. The extensive range of applications covers all areas of use. Whether for camping, at festivals, as a power source for sales stands or as a self-sufficient emergency power solution in the event of a blackout, the ELMAG Powerstations are always your reliable companion. Display - Battery capacity in % and segments - Remaining runtime - Power output - Power consumption - Output status - Symbol display for protective function Features Outlets: - 4x Schuko 230 Volt - 1x 12V KFZ 10 A - 1x 12V round 10 A - 2x USB-C 60 W - 1x USB-A 5V 2 A - 3x USB-A QC3 Inputs: - 2x 7909 12V - 45V - 2x ANDERSON 12V - 45V - 1x 12 KFZ 10 A LED light 7W Digital display Protection class IP21 Podpfxet H E Iqj Ab Iord Protective functions: - Deep charge - overvoltage - overcharge - short circuit - Overtemperature - Undertemperature 2x mains adapter 200W included 1x car charging cable included ADVANTAGES Lithium iron phosphate battery (LIFEPO4) for maximum safety and durability Also ideal for operation in high ambient temperatures High cycle stability > 2500 cycles 3 charging options: Solar, 230V and 12V Intelligent battery management system with extensive protection functions against undervoltage, overvoltage, overheating, short circuit and overcharging Extensive connection options: Schuko 12V DC, USB-A, USB-C etc. Digital display with detailed status monitoring Integrated MPPT solar charge controller Simultaneous charging and discharging possible Internal lighting with SOS function TECHNICAL DATA Battery type LIFEPO4 Battery capacity 2.232 kWh Voltage type pure sine wave Dimensions LxWxH 425x275x315 mm Weight 25 kg Maximum power 1~230V 5000 W Continuous power 1~230V 2400 W Maximum charging power 400 W

Condition: used, Year of construction: 2021, ELMAG ROTAIR compressor with HONDA GX 690 engine, performance: flow rate 1600 L/min, pressure 8 bar, air connections, weight 230 kg, vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Predpfxjwm Uafj Ab Iod

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul Pjdpfxstz Dg Ue Ab Iord - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: new, ELMAG container unit SEDSSC 350WDE-Stage 3A with SCANIA DC13 071A 02 01 diesel engine with LOROY SOMER LSA 450kVA generator with DSE 7420MK2 control module with motorized circuit breaker 630A in 20' soundproof container with 1000 liter double-walled fuel tank Sound level 65 dB(A)7m incl. engine preheating with ON/OFF switch incl. trickle charge with ON/OFF switch incl. oil drain pump incl. starter battery 24V incl. 2-layer paint 300my incl. container interior lighting incl. motorized louver flap on air inlet side Standard equipment Connection: 1 direct power outlet 24V electric start Shutdown: - Emergency stop - Magento stop - Oil pressure - Oil temperature - Tank low - Overload - Short circuit ThM-SS Generator type Leroy Somer LSA 47.3 S4 (410 kVA) DSE7420 Trickle charge Cooling water preheating Electric speed controller Modbus interface Ethernet 4 dig. inputs Pedpfx Aet H Iqujb Iord 5 potential-free outputs Tank with drip tray Oil drain pump Sound insulation SS Lifting eyes Forklift pockets TECHNICAL DATA Voltage - frequency 400 / 50 V/Hz Maximum power 3~400V 330 kVA Continuous power 3~400V 300 kVA Power 3~400V cont. 433 A Fuel type Diesel Speed 1500 rpm Cooling water-cooled Engine type SCANIA DC09 072A 02 03 Exhaust stage 3A Engine power 261 kW Displacement 9300 cm³ Cylinder 5 Tank capacity 1000 l Consumption at 75% load 46 l/h Running time per tank filling at 75% load 21.7 h Voltage regulation AVR Protection class 23 IP Dimensions LxWxH 6060x2440x2590 mm Weight (without fuel) 3760 kg Sound power according to RL 2000/14/EG, 2005/88/EG 90 LWA Sound pressure level at 7m 65 dB(A)

Year of construction: 1997, condition: used, machine/vehicle number: 4353, Technical data: - Manufacturer: Elmag Superfici - Length: 6.000 mm - Belt width: 1.300 mm - Total width: 1.540 mm - Year of manufacture: 1997 - Feed adjustable via handwheel - Feed speed approx. 2-7.5 m/min. - Frequency converter required on site - Location: in storage - Volt, Hz 400 / 50 - Motor power 0.75 kW Psdpjv Tc T Ujfx Ab Ierd

Condition: new, ELMAG Mobile pneumatic light mast K45-360 600 watt = 85,000 lumen, 230 volt, 4.5 m extendable with integrated compressed air unit and wheel set and fold-out legs TOP safety: Tilt and locking sensors in the support legs ensure automatic retraction of the lighting column if contact with the ground is lost and prevent extension if the support legs are not locked. Variable 360° LED light head Flexibly adjustable LED modules enable both 360° illumination and directional light beams. The LED modules can be adapted three-dimensionally to the area to be illuminated. ADVANTAGES Flexible use for construction sites, events, fire departments, rescue services, police and disaster control Integrated air compressor for quick and easy extension Fold-out support legs with safety switch and locking indicator Rotary control for light activation and dimming function Integrated overload protection and residual current circuit breaker Series connection of several light poles possible via 230 volt output Equipped as standard with transport and carrying handle, wheel set and removable loading aid for one-man loading Walkway mode: enables attachment to existing structures (e.g. security fence) to enable operation with folded legs. Optionally available with radio remote control! Easy handling thanks to removable railing wheel set (standard) TECHNICAL DATA Light output 85000 lm 230 V connection Max. Wind stability 70 km/h Height extended 4500 mm Height retracted 1500 mm Length 1500 mm Width 400 mm Prjdot H I Tispfx Ab Ied Height 400 mm Weight 75 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY Pedpfxjumvk As Ab Iord - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!