Used Plasma/Autogenous Cutting System for sale (48,385)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip Iodpjy Nd Hyofx Acfjif • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Iiedpfexywupsx Acfef Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Year of construction: 1980, condition: good (used), Equipment number: 2 002 Welding current at 100% duty cycle: 80 amps Connection: 18 kVA Cooling type: External cooling Features: Hose kit for connection; burner; Iisdohk El Tspfx Acfjf mobile Dimensions: 1,000 x 700 x 1,000 mm Weight: 0.3 t

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution! Iiodpfx Acetwc Absfsf

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Ijdpfx Acexa Excjfeif

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Cutting sand: 6 t MACHINE DETAILS EQUIPMENT Iiedpfew T Rxpox Acfsf - Accessories - Spare parts - Wear parts

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Iodpfxey Ipb Ts Acfoif Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table. Iijdpfsv I U Hcox Acfof

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Iisdsyazhzjpfx Acfof

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 4,00,02,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Iiodpfx Acow Al Rmofof

Condition: good (used), Year of construction: 1994, Cutting unit with edge peeling for the Lisec ESL-60/30RS cutting line Iiedpfx Acjyx Dvmjfof In good condition, as it has rarely been used. Length: 1100 mm Width: 800 mm Height: 850 mm Weight: 120 kg Condition: Good, second-hand

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Iisdpfx Acshzbi Njfsf Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Feed 6,9 kW Iijdpfx Acjkv Untefjf worked 1995 - 2012 approx. 4 hours/day

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° Iedpfxexvqvfj Acfoif • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Sale subject to prior sale.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Cutting range steel up to 30mm, exchangeable head Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Shaft for processing pipes and profiles (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes Iisdjrurraopfx Acfof

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP Ijdouixdcspfx Acfeif (Pictures are condition)

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Iedorwxu Ijpfx Acfoif Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training - Service, training and maintenance work Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Our team will be happy to help you.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. Iodpfx Aerm Ilfjcfoif With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, power: 37 kW (50.31 HP), OMAX 55100 TiltaJET, 37 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Factory-refurbished with manufacturer certification and a two-year warranty! Iiedpferm Imnex Acfef The configuration of the waterjet cutting system can be freely selected. Feel free to contact us with your individual configuration requirements. Customers searching for efficient and highly precise waterjet cutting systems will find their solution within the OMAX premium line. These powerful and extremely precise machines combine operational flexibility with the highest precision in the waterjet cutting sector. The systems can be equipped with a comprehensive range of accessories tailored to your specific cutting tasks. OMAX waterjet cutting systems are revolutionizing tool and mold making as well as single-part and series production. They are also widely used in various areas of mechanical and plant engineering. Financing via leasing is available upon request under highly attractive conditions, e.g. for up to 86 months. - Accuracy up to ± 0.02 mm - Machine components and software are up to date with the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swiveling head automatically compensates for taper errors at the cut edge, regardless of the selected quality level or cutting speed. The machine is factory-refurbished; therefore, images may vary from the actual offer. Prompt delivery can be arranged with INNOMAX AG.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. Iiedpfxeua U Tzs Acfef - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: new, - Custom machines for the mass production of solar mounting parts - Cutting - Drilling - Milling - Tapping Iodpfx Acomft Dqsfjif - Modular construction: can be adapted to your specific requirements

Condition: ready for operation (used), Cutting systems Iiodpfeibil Uox Acfof Müller Martini medium-format cutting unit

Condition: new, This collection features three of the most advanced CNC plasma cutting machines. Thanks to the user-friendly software, the Swift-Cut-Pro series promises precise cutting at the highest speeds with minimal investment. The Swift-Cut-Pro series is easy to use, quick to learn, and is backed by excellent customer service. The Swift-Cut-Pro series is the solution for affordable, in-house metal cutting. We would be happy to arrange a demonstration appointment for you. Iiedpfxogkgugj Acfjf

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Ijdpfxsw Nwuce Acfjif

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 Iijdpfjn Hxiiox Acfjf - heating: included - cooling: included