Used Pneumohydraulic Press 40 Kn for sale (33,395)

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for 2 rolls of strapping A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Bedpfeu Iwgvsx Apvodf Can crusher insert AUTO compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. Bsdpfx Ajflpnyjpvjdf After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.

Year of construction: 2015, condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Press bonding framework of internal and external doors " Bdsdpfx Apocczuqjvjf Companies Lignum-Evert Johanson --- pneumatic-hydraulic press bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded hardware give one year warranty

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Bodpfx Apexp Eqkevsdf Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter Bdjdpfxjwuq A Ej Apvjf - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Weight: 30kg

Condition: as good as new (ex-display), Collet chuck SK 40, DIN 69871/OZ32 Bjdpfx Apolrt S Nevjdf Collet type OZ32 467 E Overall length 190 mm The parts are unused in the original, unopened packaging Price per piece 12 pieces available Weight per piece 2 kg

Condition: used, Year of construction: 1998, turning diameter 555 mm turning length 4000 mm control Monforts Control System type MTC-K CCUO turning diameter over slide rest 290 mm cross movement . mm spindle passage . mm turning speeds 1600 U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw chuck Rotha-S Plus 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Bsdpfx Apjyqv N Usvodf Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Bodpfxscmat Ue Apvodf the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Bdodpfx Apju Axfcevjf Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Year of construction: 2010, operating hours: 170 h, fuel type: electric, Manitou 150 AETJL Bi Energy Articulating Boom Lift / Work Platform 2015, 15.40M Working Height Bdjdpfey Dfy Rex Apvsf Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER CSC VALID MARCH 24 SEALING IN WORKING CONDITION 2 UNITS AVAILABLE Bdjdpferk Eqvex Apvsf

Condition: new, Mori Seiki MV 40 E main spindle MV40SPU080ADA01 NEW GM4021244-009 from stock (traces of storage) Please refer to the pictures for further technical information Scope of delivery as shown Auction price is without 19% VAT and invoice The invoice will be enclosed with the shipment. The invoice will be enclosed with the shipment. Bjdeuxnwaspfx Apvsdf Cj2Gdlmgos Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. Payment method Paypal bank Pick up by yourself You will receive information about bank details, payment methods, etc. by email Request more information PROVIDER Schneider Technik CNC 74423 Obersontheim, Germany +49 7973 ... show Last online: Last week Registered since: 2018 16 ads online Please call me back Show more SEND INQUIRY EN I am a dealer Receive offers for similar machines Send inquiry Privacy policy TELEPHONE & FAX +49 7973 ... show +49 7973 ... show print view Share Manage advertisement edit

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone at ...). Bjdoyfqpropfx Apvodf IVECO S-Way AD190S40/P box body with tail lift Steel wheels, standard reverse gears, speed limiter 90 km/h, cab tilting device operated manually, halogen front headlights, black decorative film on doors, rear cab wall without window, fog lights, front underrun protection for chassis with a gross weight over 7,490 kg, first aid kit, plastic bumper, black cab attachments, electrically adjustable and heated exterior mirrors, standard cab roof insulation, flat roof in white, electronic immobilizer and second vehicle key, digital tachograph 4.1, static passenger seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, two wheel chocks, batteries mounted horizontally on the frame, generator 2160 Watt (24 Volt x 90 Amp), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, single-cylinder air compressor, 352 cc, chassis frame in grey, APU pressure release to atmosphere, standard combination brake, steel air tanks (number depends on suspension/axle version), front axle stabilizer, exhaust pipe to the left, emission standard EURO VI E, rear frame overhang 2,793 mm, omission of rear underrun protection, AdBlue tank 50 liters, heated pre-filter with separator, standard transmission mode, optimized A-pillar aerodynamics, pre-installation for toll system (OBU), includes antenna and wiring to dashboard (without receiver unit), ECO switch (switch between power and eco mode to optimize total cost of ownership (TCO) through fuel-optimized engine and gearbox settings), VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0, Eco-Roll transmission software (freewheel function), driving style analysis (DSE), adaptive cruise control (ACC), lane departure warning system (LDWS), warning triangle according to ECE-27 directive, warning beacon, electronic stability program (ESP), emergency brake assist (AEBS), tires 315/70R22.5, transparent sun visor exterior, curtains at bed, pneumatic horn behind bumper, ashtray in center console, reinforced parabolic spring on front axle, electrical preparation for tail lift operation as per VEHH standard, front axle weight variant 8,000 kg / rear axle 11,500 kg (technically possible: 13,000 kg), reinforced rear torsion bar D 60mm, battery disconnect switch in cab (electronically operated), batteries 225 Ah, without jack, battery charging socket with terminals, rear axle ratio: i 3.08, trailer socket for 24-volt operation (15-pin), trailer coupling brand Rockinger, trailer version for operation with continuous braking system, fuel tank 390 liters, aluminum, end crossmember, D-value: 130 kN, trailer coupling, 40 mm, 130 kN, frame end edge protection, electrical connection for body on left side of frame, side marker lights, reverse warning buzzer (can be switched off), axle load indicator in cluster, hill holder for comfortable starting on slopes, LED rear lights, tire manufacturer: GOODYEAR - 315/70 R22.5 KMAX S GEN-2 (3PMSF), KMAX D GEN-2, printed operating and maintenance manual, young box body tail lift according to AN 200028995 + optional right side door, ...

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Equipment: auto duplex, Demo Unit AccurioPress C4080 Low usage, as it was only used for demonstrations. Counter reading available upon request. Configuration can be customized as required. Shown here: Bdedjxgqk Dopfx Apvef - C4080 with KM-Controller IC-609 including UK-220 (APPE) - DF-716 (document scanner) - PF-707 (vacuum paper feed) - RU-518 relay unit (cooling/smoothing unit) - IQ-501 with VI-515 - FS-532 staple finisher with SD-510 booklet module Sale/rental exclusively within Germany! Price upon request! Unfortunately, we regret to inform you that we do not conduct sales outside of Germany. We kindly ask for your understanding in this matter and request that you refrain from making further inquiries regarding this issue.

Condition: like new (used), Year of construction: 2025, Equipment: auto duplex, Demo system AccurioPress C14010S Low usage, only employed for presentations. Meter count available upon request. Configuration can be customized as required. Shown here: C14010S with white toner, equipped with KM-Controller IC-610 Bjdpfx Apexgqr Ijvodf IM-104 Intelligent Media Sensor (internal) for paper characteristics and IM-105 Intelligent Media Sensor (internal) for paper sizes PF-812 (vacuum paper feed unit for banners up to 980 mm) RU-518 Relay Unit (cooling/decurling unit) IQ-601 with VI-514 LS-507 including 1 trolley TU-510e Trimmer Unit SD-513 Booklet Finisher with 3-side trimming, crease, and spine pressing Sale/rental exclusively within Germany! Price upon request! Unfortunately, we regret to inform you that we do not conduct sales outside of Germany. We kindly ask for your understanding in this matter and request that you refrain from making further inquiries regarding this issue.

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 512 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: FANUC 18i, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 64, CNC horizontal machining center, 4 axes X Y Z B (360,000) Bjdpfxey Azaks Apvsdf Automatic Workpiece Change: 5 palettes 400×400 mm Tool magazine: 64, BT40 Tool change time: 3 seconds CNC control: Fanuc 18i Motor and drive: Fanuc

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE Bsdpfx Aoh Rkhnepvjdf

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 004, 2 Vacuum Pressdryers QUATTRO with Automatic Stacking and Remote Control. Lumber and Platens are combined transported 2 Vacuum Pressdryers SIGMA 9 QUATTRO with automatic stacking Lumber content 72 m³ (30 mbf) comparable to 210 m³ (90 mbf) vacuum dryers with fans or to 800 m³ (340 mbf) conventional dryers but more economical, without contamination of the atmosphere and Bdsdpjv S U Tqefx Apvjf with Super drying-quality!

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 Bdodpfx Aeu Nyu Sspvef 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Find more items in our shop!

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr Bdedst Rhb Ijpfx Apvjf with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: new, fuel type: diesel, Tailift FD40 forklift    • Lifting capacity: 4000 kg    • Long forks Bjdpfsyaupxex Apvedf    • Direct from operation Condition: New

Condition: like new (used), Year of construction: 2024, functionality: fully functional, AccurioPress C4080 Bdedpfox H Sbgex Apvsf as new, first commissioning on 26/11/2024 PF RU517 TU510 FS532 IC610

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, load capacity: 4,000 kg, lifting height: 6,350 mm, free lift: 1,600 mm, fork length: 4,000 mm, Equipment: UVV, Includes new safety inspection! TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 6,350 mm Free lift: 1,600 mm Load center: 600 mm Fork length: 4,000 mm MACHINE DETAILS Mast type: Triplex Full free lift: Yes Fuel type: Diesel Transmission type: Automatic Overall height: 3,000 mm Operating hours: 16,620 h EQUIPMENT Side shifter Fork positioner Trailer hitch Work lights Lighting Bdodpfxezmuk Io Apvof Cab Cabin heater Air conditioning Seat heating Air-suspended seat Head protection New tires, front and rear

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Bodszmfnqepfx Apvjdf Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Bdedpfxszpw Hdo Apvef Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.