Used Proportional Pressure Control Directional Control Valves for sale (55,877)

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Bljdpjzpbqtefx Apvok Weight: 16 kg in good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Bljdpsxpqy Dsfx Apvek Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Blsdpoya Iaqjfx Apvok Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), LAUDA LTH 303 Temperature Control Unit / Heating Unit for Tool Temperature Control We have 3 LAUDA LTH 303 temperature control units for sale, all in very good condition. These units are ideally suited for temperature control of extrusion tools, nozzles, calibration dies, injection molds, and a wide range of industrial applications. All units are fully functional, immediately available, and can be inspected at our facility in Wuppertal at any time. Technical Data * Manufacturer: LAUDA * Model: LTH 303 * Year of Manufacture: 1990 * Heat Transfer Medium: Oil * Max. Supply Temperature: up to 350 °C * Connection Voltage: 220 V * Heating Power: 3.2 kW Bledpfx Aezpxcyspvok * Frequency: 50 Hz Features * Digital temperature display * Integrated circulation pump * Compact, robust industrial design * User-friendly control * Ready for immediate use

Condition: like new (used), 5 units of safety light barriers Light curtains Manufacturer: Datalogic Automation S.r.l. Series: SG4 Base Type: SG4-30-120-OO-X Protection class: IP65 Power supply: 24 V DC ±20% Range: up to 20 m Bledpfx Aozrfp Sopvjk Resolution: 30 mm Protective field height: approx. 1,200 mm (type designation “120”) Standards/Certifications: CE, UL

Condition: excellent (used), functionality: fully functional, warranty duration: 12 months, total width: 1,050 mm, total length: 1,690 mm, total height: 2,170 mm, It is a refurbished machine, ready for operation. It functions properly. Bledozpw Aropfx Apvsk

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: Bedpfeyaluljx Apvelk - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Condition: new, functionality: fully functional, New and original packed Ricoh Fiery Color Controller E-25C EDP Code: 418434 This Fiery is suitable for the following Ricoh machines: RICOH IM C3000 RICOH IM C3500 RICOH IM C4500 RICOH IM C6000 Blsdpfxewrcf Hs Apvsk

Year of construction: 2007, condition: used, Temperature range 140 °C heating capacity 8 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 mm weight of the machine ca. 48 kg Blodszpbipopfx Apvjk HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure

Year of construction: 2005, condition: used, Temperature range 140 °C heating capacity 8 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 m Blodjzpbiiepfx Apvek weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure

Condition: used, Permanent magnet DC servomotor INDRAMAT from MAHO milling machine Bedpfoznn H Eex Apvslk Type: MDC 10.10H / MMA-0 (MDC10.10H/MMA-0) Serial No. 12423 Component No. 230837 K-M = 0.30 Nm/A Ieff = 11 A Imax. = 75 A Umax. = 170 V n max = Maximum speed = 3000 rpm Tacho: 0.317 Vs/rad Shaft diameter: 22 mm Shaft length: approx. 21 mm (shaft extension from centering edge) Centering diameter: 70 mm, 7 mm height Bolt circle diameter: 92 mm, 4x M8 mounting screws Overall length: 270 mm (without shaft) Housing diameter: 133 mm Weight: approx. 20 kg Good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition Bodpfjv R E Rdox Apvelk

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Bledshik Ezopfx Apvek Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Bjdpfst Ac Efsx Apvjlk Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Spare parts donor Bledpfxodzqm Rj Apvjk We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards

Condition: new, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. (The threads are cut and painted. They must be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min ⦁ Weight: 95 kg Bljdpfxsfn Tu To Apvsk ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Bledsdf Ufdepfx Apvok Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow Bsdpfsfn Tvhjx Apvslk ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Bodpfedf Ud Sox Apvelk Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Bedpfjfn Tviox Apvslk Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic winch HAW4000 with electric valve for wheel loaders, excavators, cranes, mini-excavators, tractors in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many applications. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on logging cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They need to be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the steel rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Bledpfxjfn Tvkj Apvjk Please contact us; we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 1600 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Bsdpfxjzpbcvo Apvslk Technical features: Cutting area: approximately 5300 mm in length 1600 mm in height (model 6216) Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Location: will arrive in week 33 at warehouse 54634 Bitburg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,296 h, load capacity: 4,000 kg, lifting height: 4,660 mm, free lift: 1,660 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,350 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: - Operating hours: 3,296 - Lifting capacity: 4,000 kg - Lifting height: 4,660 mm - Overall height: 2,360 mm - Year of manufacture: 2016 Still 4.0-ton electric forklift with a full cabin, good battery, good tires, triple-mast with full free lift, side shifter, 4th valve, mini-lever, lighting compliant with German Road Traffic Regulations (StVZO), fork length 1,350 mm, charger. Price includes service according to STILL manufacturer specifications and a valid UVV inspection upon sale. The following options are available upon request: Bedpfjzfx Aljx Apvelk - Additional attachments (fork positioner, rotator, etc.; additional cost upon request) Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). Further information about us and other offers can be found on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure tank with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as a stabilizing element for compressor operation parameters. Key Features of the 200 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 200 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of ½", 1", and 2" allow flexible integration with various installations. Bledpfx Aexbzd Repvek High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Technical Specifications: Parameter Value Weight (kg) 80 Number of Connections 6 Connection Sizes ½", 1", 2" Dimensions 166.5 x 45 cm Tank Capacity (L) 200 Working Pressure (bar) 11 Wall Thickness (mm) 4 Diameter (mm) Ø 450 Height (mm) 1665

Condition: new, Year of construction: 2026, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Nameplate with CE Mark Blsdpfx Apsxbzbpjvek UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating