Used Rebar Bender Evo 36 for sale (5,858)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box Ndodpfxoyrhpps Aiyoa • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Ndsdpfxsyrhtne Aiysa Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), first registration: 01/2026, fuel type: hybrid, overall weight: 3,300 kg, color: red, gearing type: automatic, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 2,004 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4299.CHO25.SD41948 Errors and omissions excepted! ---- SPECIAL EQUIPMENT * Trailer coupling, electrically swiveling * Exclusive Package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting * Heated steering wheel * Matrix-LED headlights, adaptive - LED low beam including all-weather lights - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals in the front - LED cornering lights, static - Speed-dependent headlight range control - LED rear lights * Wheels: Alloy wheels 7.5 J x 19 in Active Design in Absolute Black * Technology Package 6: Exterior mirrors electrically adjustable, heated and foldable - Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation - Blind Spot Assist incl. CTA rear cross-traffic alert - Pre-Collision Assist, camera and radar-based - Driver drowsiness warning - Lane keeping assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Park assist system front/rear - Adaptive cruise control including Stop&Go function - Intelligent speed limiter with speed limit display - Surround view camera - Steering wheel in Sensico leather look OTHER EQUIPMENT Nedpjx Nt Exsfx Aiysda * 2 grab handles on the driver and front passenger side * 3 USB ports for the 2nd row * ABS * Airbag, front passenger side - with airbag deactivation function * Airbag, driver side * Battery: H7 AGM single battery * Roof rails, silver * Anti-theft alarm THATCHAM - with interior monitoring in the driver's cabin including central locking with additional double locking * Power windows front, electric - with quick-up/down function * Parking brake, electronic * Ford Key Free system - including Ford Power-Start function * FordPass Connect - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windshield, heated * Glove compartment with lockable lid * Interior lighting in the passenger compartment * Automatic climate control, 3-zone - with automatic temperature control for the driver and front passenger side and rear, separately adjustable - with auxiliary heater - with R-1234yf refrigerant - Auxiliary heater, electric - Electric temperature control in the rear * Charging cable, single-phase, length: 5m * Charging station, inductive in the center console, for mobile devices - according to Qi standard * Center console, large * Emergency Call Assist eCall emergency call system * Picnic light * Tire repair kit * Tire pressure monitoring system * Windshield wipers with rain sensor * Sliding door, with power assistance * Sliding door, left and right including sun blinds in the 2nd row * Rail-based flexible seating system * Side windows fixed, second and third row * Seat package 29: Front passenger seat, individual seat, 4-way manually adjustable - Driver's seat, 5-way electrically adjustable - Seat heating for driver and front passenger - Armrest inside and outside - Lumbar support for driver, electric - Lumbar support for front passenger - Airbag, front passenger side, side airbags, right and left, head/shoulder airbags, front, right and left, partially made of synthetic leather. Active, seat center in fabric, upholstery in synthetic leather velour * Socket: 12-volt connection - in the passenger compartment * Carp

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 10/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,474 mm, total height: 2,769 mm, loading space length: 3,350 mm, loading space width: 1,784 mm, loading space height: 2,025 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4722.CHO25.SG30624 Errors and omissions excepted! ---- SPECIAL EQUIPMENT * Airbag (passenger side) * Tow hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Bi-Xenon headlights with static cornering lights, LED daytime running lights * Load compartment protection package 1: Load compartment floor "Easy Clean" - wheel arch trim - high side wall trim * Load compartment protection package 2: Load compartment lighting (LED) - fuel tank 95 l * Sliding door, left * Seat package 8A: Driver's seat, 4-way adjustable - passenger double seat - headrests, height-adjustable - driver's and passenger's seat (outer seat), individually and variably heated - folding table on the passenger double seat - interior armrest for driver - lumbar support for driver - seat upholstery: fabric - leather steering wheel, heated * Auxiliary heating package 2: Auxiliary heater, programmable, incl. remote control, incl. 2 batteries and anti-theft alarm * Technology package 6P: Exterior mirrors, electrically adjustable, heated and foldable - Blind Spot Information System incl. Cross Traffic Alert - Audio system - Fog lights - LED downlight - Pre-Collision Assist, camera and radar-based - Rear collision assist - Lane Keeping Assist incl. Lane Departure Warning - Traffic Sign Recognition System, extended - Park Pilot System front/rear - Adaptive Cruise Control with Stop & Go function - All-round camera - Navigation OTHER EQUIPMENT * 1 battery * Airbag, driver's side * ABS with electronic brake-force distribution - ESP with traction control - Hill start assist - Crosswind assist - Emergency Brake Assist - Rollover protection - Emergency brake support incl. emergency brake light - additionally with trailer stabilization only in conjunction with tow hitch (at extra cost) * Exterior mirrors, short arm - with integrated turn signals * Battery: Battery life, programming the battery life to 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Headliner in driver's cab * Double-wing rear door with 180° opening angle (without window) * Power windows - with quick-down/up function for driver's side * Parking brake, electronic * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * FordPass Connect - incl. live traffic information and Wi-Fi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windshield, heated * Glove compartment with lockable lid * Interior lighting with delay function and front reading lamps * Automatic climate control * Steering column, adjustable in height and reach Ndodpfx Aijyf Sq Djyja * Particle filter: Diesel particulate filter * Radio accessories: 12-inch multi-function display and Ford SYNC 4 communication and entertainment system with voice control as well as Bluetooth and USB interface - integration of various telephone functions and hands-free system with voice control - Emergency Call Assist - Ford Power-Up software updates - Support for Android Auto and Apple CarPlay, AppLink (wireless) - Capacitive touchscreen technology - 15 different languages * Wheels: Wheel covers - full cover * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Windshield wipers with rain sensor * Headlamps - low beam Halogen headlights with daytime running lights * Sliding door, right * Mud flaps, rear * Side protection strips * Power steering * Seat belts - seat belt pretensioners and force limiters in the front

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), first registration: 12/2025, fuel type: hybrid, overall weight: 3,210 kg, color: red, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 1,982 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: CHO25.SE55291 Errors and omissions excepted! ----LOCATION: 04758 Oschatz, Filderstädter Straße 10 Phone number for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or schieler(at)---- SPECIAL EQUIPMENT * Trailer coupling, electrically swiveling * Exclusive package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting * Heated steering wheel * Matrix-LED headlights, adaptive - LED low beam including all-weather light - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals - LED cornering lights, static - Speed-dependent headlight range control - LED taillights * Technology Package 6: Exterior mirrors electrically adjustable, heated and foldable - Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation - Blind Spot Assist including CTA rear parking assistant - Pre-Collision Assist, camera and radar-based - Driver drowsiness warning - Lane Keeping Assist, lane departure warning, lane change assistant, lane centering - Traffic sign recognition - Wrong-way driver warning function - Parking assist system front/rear - Adaptive cruise control including Stop & Go function - Intelligent speed limiter with speed limit display - All-round camera - Steering wheel in Sensico leather look Nsdey Uqdcspfx Aiyeda OTHER EQUIPMENT * 2 grab handles on driver and passenger side * 2-stage unlocking for passenger compartment and cargo area * 3 USB ports for the 2nd row of seats * ABS * Storage compartment in the front * Airbag passenger side - with airbag deactivation function * Airbag driver side * Battery: H7 AGM single battery * Theft alarm THATCHAM - with interior monitoring in the driver's cabin and cargo area including central locking with additional double locking * Power windows in the front, electrically operated with quick-up/down function * Parking brake, electronic * Ford Key Free system - including Ford Power Start function * FordPass Connect - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Floor mats: carpet floor mats, front * GT stripes on the hood, the lower front bumper and the rear door - including side decorative stripes * Glove box with lockable lid * Rear window, heated * Rear window wiper * Interior lighting in the front * Automatic climate control 3-zone - with automatic temperature control for driver and passenger side as well as rear, separately adjustable - with auxiliary heating - with R-1234yf refrigerant - Auxiliary heater, electric - Electric temperature control in the rear * Charging cable, single-phase, length: 5m * Charging station, inductive in the center console, for mobile devices - according to Qi standard * Center console, large * Emergency call assistant eCall emergency call system * Picnic light * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 with 215/60 R17C 109/107T tires - in sport design in matte black * Windshield wipers with rain sensor * Sliding door, with power assist * Sliding door, left and right including sun blinds in the 2nd row of seats * Rail-based flexible seating system * Side windows fixed, second and third row, left and right * Seat Package 19: Driver's seat 5-way electrically adjustable - Front passenger individual seat, 4-way manually adjustable - Seat heatin

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: K08003, cutting length (max.): 650 mm, type of input current: three-phase, working width: 1,170 mm, input voltage: 380 V, NEWLONG 2036TS + 508HS Automatic Paper Bag Making Machine Manufacturer : NEWLONG Model : 2036TS + 508HS Year : 2008 Serial No. : K08003 Origin : Japan Condition : Good Working Condition Specifications Nodpfx Aiezmq T Eeyeda • Bag Width : 200 - 360 mm • Bag Length : 260 - 590 mm • Cutting Length : 350 - 650 mm • Bottom Width : 70 - 210 mm • Max. Paper Roll Width : 1,170 mm • Production Speed : Up to 180 bags/min Main Features • Full Servo Controlled System • Gearless Drive • Shaftless Unwinder • Automatic Roll-fed Operation • Concealed Flat Paper Handle Unit (508HS) • High Precision Photo Cell Registration • Fast Size Changeover • Stable High-speed Production The machine is in good operating condition and can be inspected under power. Inspection and test run are available upon request. Please contact us for additional photos, videos, or quotation.

Condition: used, empty load weight: 11,860 kg, maximum load weight: 22,140 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/2008, next inspection (TÜV): 07/2026, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle liftable, last axle steering, ABS (anti-lock braking system), catwalk, side underrun protection, supports, storage box, rotating beacon, rear discharge. Nodpfxjy Twmbo Aiysda Superstructure: Suction and pressure tank semi-trailer with 1 compartment approx. 26,000 l with ADR (FL/AT), 3x 9t BPW axles, disc brakes, 1st axle liftable, 3rd axle steered! Next tank inspection: 07/2026! Leakage and functional test valid until 07/2029! Accessory information without guarantee. Subject to change, prior sale and errors excepted!

Condition: new, functionality: fully functional, Year of construction: 2026, Sheet metal folding machine MB-2150 is used to bend metal sheets up to 2150 mm length and 1mm maximum thickness. You can make roofing, ventilation, drainage system elements, windows parts etc. with our sheet metal folding machines. The main difference of our sheet metal folding machine from other brand’s machines is replaceable upper bending bar, so you can change one with standard shape to another one segmented and to use folding machine as segmented bending machine. Or using corrugated shape bar to make corrugated sheet walls and roofing panels. So it allows to wide machine functionality, help to save you money from buying another machines and save your working places. “Standard +” set includes as in standard set sheet metal folding machine, cross cutting knife, alidade, angle limiter and also front cutting limiters, back table, handles, wheels and hand bending tool or shock absorber as an option. front cutting limiters back table handles wheels hand bending tool shock absorber As additional accessories you can also get: 1. Pedals, so it lets to press metal sheet without using sides handles and to make work of one person easier with the machine; pedal mechanism 2. Segmented upper bar, so it allows to bend metal sheets from all four sides and to produce boxes, etc.; segmented upper bar 3. Segmented bending bar, so it allows to bend façade cassettes with the machine; segmented bending bar 4. Corrugated sheets producing tool, so it lets to make corrugated sheets panels for walls and roofing; corrugated sheet tool corrugated panel We produce four models of sheet metal folding machines MB: 1. Sheet metal folding machine MB 1400x1.2mm Nedey Sgy Ijpfx Aiyoda 2. Sheet metal folding machine MB 2150x1mm 3. Sheet metal folding machine MB 2650x0.8mm 4. Sheet metal folding machine MB3150x0.7mm Weight: 200 kg Dimensions (LxWxH): 260 cm x 70 cm x 110 cm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,115 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished, no guarantee Technical condition: Good Front tire type: Non-marking Front tire size: 200 50 10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 16x6-8 Rear tire condition: 60 - 80% Battery voltage: 48V Battery Ah: 775Ah Battery manufacturer: Hoppecke Battery type: PzS Njdpfxsy Uz Swo Aiyjda Battery year of manufacture: 2020 Battery condition: 60 - 80% Description: Delivery includes a new FEM 4.004 inspection with inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We will gladly provide you with a quote for delivery at favorable conditions. We also offer trade-in options for Linde equipment, even if you do not purchase a device from us. The indicated operating hours were recorded at the time of listing. Subject to prior sale, changes and errors. Side shifter, fork positioner, Stabau fork positioner with separate side shifter, manufactured in 2021 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, compliant with STVZO (German Road Traffic Act), full cabin, full free lift, safety light, seat heater.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,747 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double-pedal Condition: Refurbished without warranty Technical condition: Good Front tyre type: Non-marking Front tyre size: 18x7-8 Front tyre condition: 60 - 80% Rear tyre type: Non-marking Rear tyre size: 140/55-9 Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2014 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 inspection incl. inspection booklet Nedsyx Nnbopfx Aiyoda Sideshift, Sideshift pre-installed, 4th valve to carriage, 3rd valve, 4th valve, rear work lights, front work lights, front windshield, full free lift, safety light, single-pedal control,

Condition: used, Year of construction: 2021, Technical details: feed pressure: 8 bar liter capacity: 620 l total power requirement: 4 kW sound level: 63 dB(A) revolutions per minute of the motor:: 920 Number of cylinders: 2 electrics - voltage/frequency: 400/50 V/Hz Pressure max.: 14,5 bar Number of working hours: 2195 h machine weight approx.: 194 kg Ndsdpsxrdw Iofx Aiyoa dimensions L x W x H: 1,24 x 0,85 x 1,20 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. *

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,186 h, load capacity: 1,600 kg, lifting height: 3,145 mm, free lift: 1,518 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,121 mm, battery capacity: 500 Ah, battery voltage: 48 V, fork length: 1,600 mm, Equipment: CE marking, UVV, full service history, gripper hydraulics, lighting, pallet forks, For Sale: Linde E16C-02 EVO Electric Forklift with 1600kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, offers a well-maintained Linde E16C-02 EVO, built in 2018 with 4,186 operating hours. This forklift is equipped with premium specifications that will optimize your internal logistics processes. Ndedpfoxtb Umex Aiyoa Key Specifications: Lifting height: 3,145 mm Overall height: 2,121 mm Free lift: 1,518 mm Load capacity: 1,600 kg Independent side shift: Enables precise and flexible handling of various loads. Tyres: Fitted with four high-quality solid tyres Operation: Equipped with a single foot pedal for intuitive and efficient control. Accessories: Work lights, amber beacon, blue spot, and red side lighting for enhanced visibility and safety. Including charger: Comes with a matching charger, allowing immediate operation. Advantages of the Linde E16C-02: Excellent Maneuverability: Thanks to its compact design and innovative Linde combi-steer axle, this four-wheel forklift is perfect for use in narrow aisles, with minimal tyre wear and no floor damage. Ergonomic Design: The spacious cabin and intuitive controls, such as Linde Load Control and the twin-pedal system, ensure a comfortable working environment, boosting productivity. Reliable Performance: The powerful AC motors and Linde Load Control system deliver precise and efficient load handling. Low Maintenance Costs: Maintenance-free components like the AC motors and wet disc brakes minimize downtime and maintenance costs. This Linde E16C-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and discover how it can enhance your business operations. Interested? Contact 2Bro-Trading B.V. today to schedule a viewing!

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Njdpfx Aiex Rz Dxsyjda Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386V11914, Year of construction: 2019, operating hours: 5,993 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm Ndodpfxoytn T Ro Aiyoa MACHINE DETAILS Mast type: Triplex Drive type: Electric Version: 3-wheel electric Battery: 48 V, 625 Ah, tested very good performance at 50.1 V Operating hours: 5,993 h EQUIPMENT Former Linde full-service unit UVV inspection valid until 02/2027 Next service due 02/2027 or in 1,000 operating hours All dimensions are rounded figures. No liability for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email proof of payment! Collection WITHOUT further registration possible Monday to Friday 7:00 am to 4:30 pm. A mast that is too high can be dismantled for transport upon request. In case of delayed collection, a storage fee of €20 per machine per day will be charged (payment must be settled prior to pickup).

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 15900 € 305.28 € 50 - 60 mm 180 mm 180 mm 180 mm 3 3.75 kW 6 m/min 60x10 mm / 500 mm; 20x5 m 80x20 mm / 500 mm; 50x5 m 32x32 mm / 400 mm; 12x12 Ø 35 mm / 350 mm; Ø 10 mm Ø 60x2 mm / 600 mm; Ø 15 50x25x3 mm / 450 mm; 20x1 45x3 mm / 600 mm; 20x2 mm 60x60x6 mm / 650 mm; 30x3 50x50x5 mm / 550 mm; 30x3 Ndsdeyn R E Sepfx Aiyoa UPN 80 / 600 mm, UPN30 / UPN 65 / 600 mm; UPN 30 / IPN 80 / 600 mm 1200 mm 850 mm 1200 mm 955 kg 3 mech. driven rolls (brake motor) hardened shafts lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH

Condition: used, functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: yellow, overall weight: 3,650 kg, operation weight: 3,759 kg, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2497348, Equipment: UVV, cabin, rubber tracks, standard shovel, Technical specifications Year of manufacture: 2022 Engine: 18.4 kW, 24.7 hp, diesel Ndjdpfx Aeyqyuzeiyea Weight: 3.7 t Dimensions (L x W x H): 4.80 m x 1.55 m x 2.48 m Track width: 300 mm Breakout force: 32 kN Displacement: 1.496 l Digging depth: 3.51 m Max. dumping height: 3.53 m Gradeability: 30% 3 different buckets Fully functional, UVV certified

Condition: used, Year of construction: 2017, operating hours: 5,405 h, functionality: fully functional, mileage: 40,637 km, power: 72 kW (97.89 HP), first registration: 08/2017, overall weight: 7,050 kg, fuel type: diesel, color: orange, axle configuration: 4x2, operation weight: 4,600 kg, empty load weight: 4,600 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, tail-lift, self-propelled cleaning machine: + Dulevo + 3000T Revolution EU6 + First registration: August 29, 2017 + 40,637 total kilometers; 5,405 total operating hours + 10,562 sweeping kilometers; 2,521 operating hours + 4-cylinder VM diesel engine, 2970ccm; 98 hp, Euro 6 (Stage IV/(EU) 64/2012A) + Hydrostatic transmission (max. speed 40 km/h) + Handheld suction hose + Dust filter + Fresh water tank with dust suppression nozzles + High-dumping system + Brushes on the left/right and center roller, individually controllable + Front brushes on the left/right, swiveling; direction of rotation can be changed + Warning lights + Central lubrication system + Rear-view camera + Radio/CD player Ndjdpfx Aiozcfndjyea + Radio communication system + 500cm x 160cm x 267cm (l x w x h) + Unladen weight: 4,875 kg; permissible gross vehicle weight: 7,050 kg Municipal vehicle from first owner Receive all new vehicle listings by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26018/1, operating hours: 24,390 h, load capacity: 5,000 kg, lifting height: 4,450 mm, load center: 500 mm, fuel type: gas, mast type: mono, construction height: 2,850 mm, motor manufacturer: VW, gearing type: hydrostat, front tire type: pneumatic tires (air-filled), rear tire type: cushion tires (black), Equipment: lighting, sideshift, Tele free-view mast, build height: 2850 mm, lift height: 4450 mm, fork positioner with sideshift, road lighting according to STVO, LED work lights front and rear, fully enclosed cab with heating (left door missing!), VW LPG engine, dual pedal foot control, 4x pneumatic tires front, SE tires rear, operating manual included. Technical condition upon sale: Forklift has been technically overhauled! Major service newly carried out! UVV inspection newly passed without defects! Delivery: In perfect condition! 20 years of professional experience! Ndodpjy I Dn Usfx Aiyoa

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, load capacity: 2,000 kg, lifting height: 2,800 mm, fuel type: electric, Are you looking for one of the absolute best electric forklifts on the market? We are now offering a Linde E20 Evo from 2022, which is in excellent condition. This is the right truck for those who prioritize operator comfort, precision, and world-class reliability. The forklift has only run about 650 hours and was recently serviced by certified Linde technicians (January 2026), including a full maintenance check and a passed fork inspection. The machine is fitted with studded front tires, which can easily be removed if desired. Included are also long forks (extensions). Technical highlights & equipment: - Capacity: 2,000 kg lifting capacity - Powertrain: Dual maintenance-free AC motors (Linde Dual Motor Drive) for seamless acceleration and excellent traction Ndodpfx Aioy Dd Hijysa - Operator station: Fully equipped cabin with heater, radio, and new-generation ergonomic seat/armrest - Linde Twin Drive Pedals: Dual pedal system allows fast and smooth switching between forward and reverse - Linde Combi Axle: Patented rear axle provides the stability of a four-wheeler with the maneuverability of a three-wheeler Year of manufacture: 2022 Operating hours: approx. 650 h Lifting capacity: 2,000 kg Lift height: 2,800 mm Travel speed: Up to 20 km/h (with and without load) Turning radius: approx. 1,700 mm Total weight (incl. battery): 3,700 kg Battery: Lead-acid battery (48 V / 690 Ah) This Evo model is optimized for lower energy consumption and higher productivity compared to previous generations. A solid investment, ready for immediate delivery. Shipping costs apply.

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ndjdpfjyb Hu Nox Aiyoa Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: good (used), Year of construction: 2003, CNC turning center Nodezaud Aopfx Aiyjda TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,24,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar Nsdpfx Asza Ucxjiyjda • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information! Njdpfxexz Ex Se Aiyeda

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,343 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: gas, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Single-pedal control (conversion to two-pedal possible) Condition: Refurbished without warranty Technical condition: Good Front tires type: Superelastic Front tires size: 200 50 10 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires size: 18x7-8 Nedjxxdzaepfx Aiyoda Rear tires condition: 60 - 80% Description: Supplied with new FEM 4.004 inspection including test log. Feel free to call us if you have any questions. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to offer you leasing & financing options as well as delivery at favorable conditions. We can also consider taking your Linde machine in part exchange—even if you do not purchase a unit from us. Operating hours shown were read at the time of listing. Subject to prior sale, changes, and errors. Side shifter, integrated side shifter, 4th valve pre-installed up to the fork carriage, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, full free lift, safety light, non-marking tires, exterior mirrors, single pedal.

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Ndedpfsxqm Tvjx Aiyoa