Used Rollmak Sme 140-20/4,5 for sale (32,906)

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Dwjdpozcbmiofx Apteb Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Dodpfx Aszzwgueptjwb Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 Dodpfozlr Dcox Aptswb If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Dsdpjzb N T Uefx Aptjwb Storage location: Nattheim

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Djdpezb Enzsfx Aptjwb Highlights: • Swiss precision machine (Pemamo) • Very high accuracy • Ready for operation – demonstration possible • Robust and durable design The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, Zeiss Accura II - measuring range 2000x3000x1500 mm - RDS with XXT ( possible additionally LineScan) - C99 - pneumatic damping system - laser safety system installed Dwodpfx Apozpzp Njtob - compressed air drying system included - probe changer, callibration sphere, aluminiumi threaded plate included - latest Calypso basic CNC - installation and callibration included (ILAC possible)

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Dwedpfxov I U Hcj Aptob Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table.

Condition: used, Year of construction: 2012, Engel ES4550/750K-V (2000) Dwsdpfxjy I Anmj Aptob Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Dwodpfx Apszrwypsteb Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 20 ft, overall weight: 30,400 kg, maximum load weight: 28,000 kg, empty load weight: 2,300 kg, loading space volume: 33 m³, loading space width: 2,350 mm, loading space length: 5,900 mm, loading space height: 2,390 mm, operating hours: 10 h, machine/vehicle number: 0000, 🚢 20ft Storage Container – Like New (Year of Manufacture 2026) – Available Immediately! High-quality shipping container in near-new condition – perfect as storage space, workshop, construction site container, or for professional transport. ⭐ Your Advantages at a Glance 🆕 Year of Manufacture 2026 – like new 💪 Very stable steel construction (2 mm wall thickness) 🌧️ Wind- and waterproof 🔐 Securely lockable with a 4-point door locking system 🚚 With CSC plate – transportable worldwide 🌬️ With ventilation to prevent moisture 🪵 High-quality wooden floor 🛠️ Forklift pockets in the floor 📏 Dimensions & Technical Data 📐 External Dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal Dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door Opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Tare Weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers impress with their durability, safety, and versatility – ideal for businesses, construction sites, trades, or demanding private use. 📬 Request a quote now – we will create an individual offer for you! 👀 Other container sizes & variants available. Dedpfx Ajwu Uy Ujptswb 🚛 Delivery possible throughout Germany (for an extra charge).

Condition: new, Year of construction: 2022, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 456516, overall weight: 255 kg, load capacity: 20 kg, arm reach: 2,010 mm, This is a KUKA KR 20 R2010 KS-F/SEL industrial robot with KRC5 controller, manufactured in 2022. The controller includes the following options: KUKA.ActivationManagementTool KUKA.Platform DiagnosisSafety DiagnosisServiceEtherCAT ExpertTech GripperSpotTech KUKA.BoardPackage Dodpfx Aezl Dv Rsptowb KUKA.DeviceConnector (pre-installed) KUKAPROFINET MS KUKA.SoftwarePackage smartPAD-2 KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration LoadDataDetermination OrangeApps.UserLogonUSB SafeOperation UserTech

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant Year: NEW Capacity: up to 140 t/h 1 year warranty - Calorific value of the fuel: 9,600 kcal/kg - Material passing through the #8 (2.38mm) sieve: no more than 20% - The equipment was developed to facilitate transportation as much as possible without the need for pilot vehicles. Simply connect the equipment to the asphalt binder storage and fuel system. - Chassis is constructed with a highly resistant I-beam with a forged kingpin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, and a mechanical support leg with telescopic support. - Quadruple feed bin (two-by-two) with a 3.80mm wide opening and a capacity of 6m3, completely designed to withstand the stresses during material unloading. Regulated slide gate for aggregate flow. - Automatic vibrator system for one bin, which facilitates the flow of fine aggregates with high humidity levels in one of the bins. - Feeding belts with 20" wide canvas supported by 4" rollers in a "V" configuration with permanent lubrication. The gearbox is directly connected to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-beam, 24" wide canvas supported by 4 rollers in a V configuration with shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven support rollers made of high-carbon steel, driven by a gearbox, 15hp electric motor. Dodpshd I T Ssfx Aptewb - Rotational external mixer - Burner with fuel spraying via gear pump, Kcal/h - Dry filtering system consisting of a dust collection system - Control system: Sistex Further options and accessories: Control system, control room, dust filter/dust collector Further information: Intended use: Construction, Usable material: Asphalt, Overall condition: very good, Technical condition: very good, Visual condition: very good.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow Oil Cooler D20V D30V 2 Flow Oil Coolers - Coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulating coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Dwodpeg U H E Ssfx Aptjb Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr Flow Oil Cooler Type D 20 V, Year of manufacture 1998, serial number 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow Oil Cooler D 30 V Wöhr Flow Oil Cooler Type D 30 V, year of manufacture 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Price negotiable Our target price per unit is €1,950 net, ex works, plus packaging costs. All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Union.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 930 h, load capacity: 1,400 kg, lifting height: 3,250 mm, free lift: 76 mm, fuel type: electric, mast type: simplex, construction height: 2,170 mm, fork length: 1,150 mm, empty load weight: 1,200 kg, total length: 760 mm, drive type: Elektro, construction width: 770 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 225Ah Battery year of manufacture: 2024 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). Dsdevlmdhjpfx Aptowb Pulse control, CE certificate,

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head Dwodoxc U H Ujpfx Aptsb -Boring head: MK5 mount -Spindle size: Ø 120-140 mm -Dimensions: Ø 124 x 253 mm -Weight: 8.4 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Dodpfx Apozrwzajtjwb New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model with 20 GN 2/1 or 40 GN 1/1 trays is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant supervision. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The iCombi Pro has only been used for 5834 operating hours! Approximate power consumption: 37 kW Manufacturer's recommended retail price: €30,739.49 net = €36,580.00 gross Request your best price. These are example photos of an identical model in comparable used condition. Actual photos will follow shortly. Our device service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded devices at fair prices. Professional and competent advice - before and after the purchase. Flexible shipping or self-collection options. Provision of operating manuals, connection diagrams & spare parts. Complete range of accessories at attractive prices. Condition: used, inspected, fully functional Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity / tray: 5 kg Max. total loading quantity: 100 kg Weight of electric device: 325 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection value: 67.9 kW Power in steam mode: 54 kW Power in hot air mode: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Further information: Temperature range: 30°C to 300°C Detects current cooking chamber conditions Recognizes the size, loading quantity and product condition and calculates the browning accordingly Learns which cooking habits are used most often and implements them Determines the ideal cooking path to the desired result MyDisplay - user-configurable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature probe with automatic error correction in case of probe failure and positioning aid Door compartment glazed, energy-saving LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and adjustment Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 stages USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: Fast cooling of the cooking chamber Dwjdpfx Apszwu U Isteb Automatic adjustment to the installation location (altitude, climate, etc.) Device door with ventilated triple-glazed pane and swiveling inner pane Waste water fixed connection permissible according to SVGW Splash and spray water protection IP X 5 Separate solenoid valves for soft and hot water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to changes and errors.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, ABB Robotics IRB 2600 20/1.65 Foundry Plus IRC5 M2004 robot – mechanics only Number of axes: 6 Max. payload: 20 kg Max. working range: 1650 mm Year of manufacture: 2012 Dedpfszmq Rkox Aptewb Serial numbers: 1 x 26M-65014 1 x 26M-65015 1 x 26M-64955 1 x 26M-64956 Scope of delivery: Robot mechanics, control cabinet, teach pendant, connecting cables Used – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Dwedpfx Apjxl S Uhotsb

Condition: ready for operation (used), Year of construction: 1990, control type: manual, degree of automation: manual, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge adjustment: manual, back gauge: 800 mm, power: 7.5 kW (10.20 HP), overall weight: 1,800 kg, total length: 2,850 mm, total width: 2,350 mm, total height: 1,600 mm, cutting length (max.): 2,050 mm, throat depth: 300 mm, Guillotine shear, cutting length 2050 mm, cutting capacity 3.25 mm, throat 200 mm, motor 7,5 KW, working high 800 mm, back gauge 800 mm manual, dimension 2850x2350x1600 mm, weight ca. 1800 kgs Dsdpfx Aozy Nlyjptewb

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,709 h, load capacity: 14,000 kg, lifting height: 4,265 mm, fuel type: electric, mast type: duplex, construction height: 3,525 mm, drive type: Elektro, Multidirectional forklift Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Sideshift, fork positioner, Dwedpfx Aeywp R Hjpteb

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. Dwedpfx Apjzy U Rujtjb The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: used, Year of construction: 2019, We offer this used OMS Hennecke Ecomaster 2 (40/20) polyurethane processing machine, year of construction 2019. Dwedezpah Depfx Aptjb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, The machine has undergone a complete overhaul. It features new shafts, bronze bushings, bearings, rollers, rear sprockets, a completely new pneumatic system, a new electrical cabinet, and a feed rate control has been installed. Dodjzv Euvjpfx Aptowb

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Technical data: - Pressing force 320 t - Working width 3050 mm - Distance between uprights 2550 mm - Overhang 460 mm - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain Dodpfx Apjzzzcmstswb - Electric foot pedal - 4-way universal die, split - V-dies - Split top tool set, various other tools