Used Glass Drilling Machine for sale (68,124)

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Hnjdpfonp I N Ajx Achor

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Hjdpfsh Ek H Sox Achjnr Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Hnodpfozmwrnjx Achjr Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Rated current: 8 A Weight: 520 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 1991, Glass drilling machine with table (extendable) 1. Width: 900 mm Hsdpfx Aozfhd Eschjnr 2. Width: 1800 mm / with arms extended Height: 1600 mm Depth: 1200 mm Condition: good, second-hand

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Hnjdpfey Nltnex Acher Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: used, • Type: W125 • Year of manufacture: 1989 • 2 brushes / water tank, pumps • Running direction: Right to left • Open top • Washing brushes 130 cm high Hnodpsyucwyjfx Achjr • Heating • Price on request

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Hsdsx Rp Rgepfx Achsnr

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Hedpfx Aceyfrvyjhsnr Surplus drilling/countersink bits included As is Available immediately

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually Hnodpfx Aeuqma Aschsr

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Hnedow Sdwijpfx Acher Width: 1850 mm Height: 1800 mm Depth: 1200 mm

Condition: good (used), Year of construction: 1995, Electrical connection rating: 1.75 kW 380/220 V/ 5.2 A Total length with side tables: approx. 2520 mm Depth max. approx. 1170 mm Height max. 1550 mm Hedpfexrp Niex Achjnr

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Hjdpjyc Egyefx Achonr

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 5976/07, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, total width: 1,850 mm, total length: 2,500 mm, total height: 1,750 mm, overall weight: 420 kg, drill diameter: 130 mm, pressure: 6 bar, working height: 1,000 mm, Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Hedpjxg Ngqofx Achjnr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine with extendable roller table 700 mm Hnjdpfx Aeyub Azscher machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm Hnedeyy Rn Sepfx Acher * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, spindle diameter: 100 mm, number of axes: 3, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,400 mm Travel range, Z-axis: 1,000 mm Spindle diameter: 100 mm Hnodpjzrmncsfx Acher Table length: 2,200 mm Table width: 1,500 mm MACHINE DETAILS Drive system: Conventional Number of axes: 3 Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,400 x 2,850 mm Weight: approx. 5,000 kg

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Hjdpfx Asw Hanhjchjnr Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Hedpfx Acew Db Nuehsnr Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm Hnodpfeibq Itox Acher sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm Hsdpfx Aezuk Aiechjnr - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of feed cylinder (drilling depth adjustment): 50 mm - Drilling speed, pneumatically adjustable - Drilling angle, manually adjustable - Main motor: 1.5 kW - Side guides: 400 mm - Compressed air requirement: 6-8 bar - Diameter of dust extraction port: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES – Made in Italy – 21 spindles – drill bits mounted on quick-release fittings – Drilling in vertical, horizontal, and angled positions – Unpainted – Used drill press, very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, machine/vehicle number: 008698, X axis working area: 4200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Hsdpfjztka Eox Achsnr Maximum edge height: 65 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Hnedpfxozgdfbo Achjr Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Hedezuynhjpfx Achonr Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Hnjdpfx Acezuxdbohor Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Hnsdpfxezuw Ixe Achjr Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)