Used Rotoflex Racer 1000 for sale (8,170)

Year of construction: 2000, condition: good (used), Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Kdsdpfxsi Eld Uo Ac Nel Machine weight approx. 11000 kg

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Press force 100 t Bending length 3100 mm Stroke 215 mm Kdedpfewn Ebvox Ac Nsl Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Total power requirement 7.5 kW Machine weight approx. 8,000 kg Dimensions L-W-H 3450x2000x2800 mm

Condition: used, Conical mixer, Nautamix, Nauta N.V. Mixing capacity: 1000 liters Stainless steel mixing vessel and mixing screw Kdedsy Tlgpepfx Ac Nol Drive shaft made of steel Motor power: 4 kW and 0.55 kW Upper cone diameter: +/- 1700 mm Equipped with a pneumatic discharge slide valve See our other listings.

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms Ksdpfxeiy Dl Ho Ac Nodl - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 0529/90, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning diameter: 1,000 mm, center height: 200 mm, turning length: 1,000 mm, overall weight: 1,800 kg, For sale: Universal lathe Prvomajska - Type: TNP 190 / 1000 - Machine No.: 0529 / 90 - Year: 1990 - Weight: 1800 kg - Certificate: 0251 - Max. turning length: 1000 mm - Max. turning diameter: 400 mm - Spindle bore: d=50 mm Kedpfxjy Rzt Ts Ac Njdl ACCESSORIES: faceplate fi200, tailstock centre, drill chuck head, tool holders, tapers for large drills, sleeves for large workpieces, various belts, various drills… The machine has been regularly serviced, maintained, and is in excellent condition. It has performed various tooling operations. It is connected to the power supply and ready for immediate use.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 0216/88, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning diameter: 1,000 mm, center height: 200 mm, turning length: 1,000 mm, overall weight: 1,850 kg, For sale: Universal lathe Prvomajska - Type: TNP 380 1000 - Machine No.: 0216/88 - Year: 1988 - Weight: 1850 kg - Max. turning length: 1000 mm - Max. turning diameter: 400 mm Kodpfxsy Rztys Ac Nodl - Spindle bore: d=50 mm ACCESSORIES: lathe chuck fi200, tailstock center, drill chuck, tool holders, tapers for large drills, steadies for large workpieces, various belts, various drills… The machine has been regularly serviced, maintained, and is in excellent condition. It has been used for various tooling jobs. It is connected to the electrical network and ready to operate.

Year of construction: 2021, condition: used, Set of two containers. Sold as a set or individually. Internal reference : - #12431-1 -> SN° : 323808 Kjdpjy N Ec Ajfx Ac Nedl - #12431-2 -> SN° : 323809 Manufacturer : Thielmann Model : 31AW Type: 1000-litre container with agitator (removable) Year : 2021 Engine power: 1.5 kW – 1,500 rpm Heating and insulation between the outer shell and the tank Variable speed drive Material: 304 stainless steel Maximum pressure: 0.30 bar Weight : 320 kg Dimension : 120 x 110 x 200 cm Quantity available : 2

Condition: like new (used), Year of construction: 2009, 🔥 FOR SALE: 2x Fröling Turbomat 500 kW Cascade System – Total Output 1000 kW 🔥 ✔ 2x Fröling Turbomat 500 kW ✔ Total output: 1000 kW ✔ Fully automatic woodchip heating system ✔ Lambda control + negative pressure regulation ✔ Moving grate feed ✔ Automatic cleaning and de-ashing ✔ 4-pass heat exchanger with automatic WOS cleaning system ✔ Integrated multi-cyclone dust separator ✔ Water-cooled feed channel ✔ Heavy-duty industrial design Suitable for: - Woodchips - Pellets - Sawdust - Biomass fuels 📦 Included in the price: Kedpfxey Rfa Rj Ac Nsdl - 2x boilers - 2x screw conveyors - 2x pumps - 2x return flow mixing valves - 2x control panels / controllers - Return flow lift up to shut-off valve - Ash screw conveyors ❌ Not included: - Moving floor discharge - Ash container 🔧 Dismantling: - 16.06 – 17.06.2026 - Dismantling included in the price - Crane loading directly via roof opening 🚛 Loading: - 18.06.2026 - Crane firmly booked from 07:00 – 10:00 - Transport and truck logistics to be organised by the buyer ⚠ The buyer's truck must be on site before crane works begin. Additional crane hours due to delayed truck arrival must be paid directly by the buyer on site. Márton Pauker Top Heating Systems BEN & JAK KFT 📞 🌐

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Kodpovvkqgjfx Ac Nedl

Condition: excellent (used), with internal grinding attachment Ksdey H Dq Hjpfx Ac Nedl Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm Kdodpfxowwl I Io Ac Njl workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Kdjdpsq Nx E Sefx Ac Nel After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Kodpfoy Hki Aox Ac Nedl Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 Kjdpfx Acjr D Nmye Nodl - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: used, Attachment suited for: Construction machines Kjdpey Taq Nefx Ac Nodl

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Kedey Hhqdjpfx Ac Njdl Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, Machine used for shot blasting of steel components; additionally, the machine is equipped with a wet dust collector, which enables blasting of aluminium parts (additional installation available at extra cost). -Year of manufacture: 2024 -Machine operating time: 2,000 hours -Mesh conveyor made of manganese, width 1,000 mm -Adjustable conveyor belt speed -4 turbines, 11 kW each, type Rutten Gamma 330 HD -Variable turbine speed regulation -Hot Spot chamber made of manganese and tool steel Ksdpfswvgbgjx Ac Njdl -Automatic parts detection -Automatic abrasive flow control -Automatic abrasive refill -Automatic parts blow-off -Dedusting system: Rosler BF 40/40 -The machine allows the use of GH-grade extremely hard, sharp-edged blasting media -Turbine blades made of carbide guarantee 30,000 working hours -Turbine housings made of carbide offer even greater protection against machine body wear

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Kodpfx Aey Iam Hoc Nedl Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2003, GRASSAIR SFX 1000 screw compressor (ATLAS COPCO screw module) on a 500L tank after service Kdedjwc Shxopfx Ac Nsl Technical data: capacity 1.00 m3/min (1000 L/min); 7.5 KW engine; max. pressure 10 bar; year 2003 compressor fully operational; net price: PLN 9,500 gross price: PLN 11,685

Condition: used, Scope of delivery see photos Technical data see PDF file Kdsdpjvucgqofx Ac Njl *

Condition: ready for operation (used), functionality: fully functional, The Glass VSM 1000 mixer is an industrial machine designed for the homogenous mixing of food products in demanding food processing environments. It is used to ensure an even distribution of ingredients, particularly in meat processing and prepared food production lines. In this way, it guarantees consistent quality while improving product stability. Thanks to its robust design and intensive mixing system, the Glass VSM 1000 allows for rapid and uniform mixing of products. The machine ensures efficient operation even with large volumes, which directly optimizes production performance. Consequently, it helps improve material yield while limiting variations between batches. Furthermore, its continuous operation allows for a smoother flow of industrial cycles. Next, this mixer stands out due to its all-stainless steel structure and design tailored for environments with high hygiene requirements. At the same time, it can be easily integrated into an existing line, particularly after grinding and before packaging or cooking. In addition, its simplified maintenance reduces downtime and improves machine availability. Finally, the Glass VSM 1000 mixer represents an efficient solution for manufacturers seeking reliability, consistency, and productivity. As a modern piece of equipment, it offers an excellent balance between industrial capacity and control of investment costs. Technical specifications: Year: 2023 Machine number: 4456 Power: 14 kW Power supply: 400 V Electrical configuration: 3~ PE Kdodey Tkkmspfx Ac Nel Frequency: 50 Hz Rated current: 30.7 A Maximum protection: 32 A Unladen weight: 1800 kg Construction: stainless steel

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Kjdey H Igfepfx Ac Nedl Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: good (used), functionality: fully functional, working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved bed Working width: 240 mm, Working height: 160 mm, 5 spindles Spindle diameter: 50 mm Kdodpsx Dzc Sofx Ac Nol Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6 – 36 m/min, One powered roller in the table at the outfeed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Light barrier, Cutting angle: 2.4°, Kodpfx Asxal Uwsc Nodl Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm Kdedpfxeyif Nls Ac Nsl max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.