Used Automatic drilling machines for sale (33)

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Csb Hljgbdpke H Iksgt Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: repair required (used), Functionality: not functional, used drilling rig , consisting of : - drilling machine MAXION , 50 mm , infinitely variable speed adjustment - hydraulic feed device , without hydraulic unit - 2-spindle drill head BOHRMASTER , max. 32 mm drilling capacity - Pneumatic clamping device - Sliding table with spray plates , table 1200 x 600 mm, adjustment range 600 mm - Coolant device - Separately standing : Electric cabinet Cgob Hl H Iswduw Ejkjt . For setting up : - Feed device without hydraulic unit - Electrical system (without wiring diagram) .

Condition: good (used), Year of construction: 1984, A Heckler & Koch BA20 CNC-controlled automatic drilling machine from 1984 is for sale. Working range x-axis 650 mm, y-axis 350 mm and z-axis 200 mm Work table with two clamping surfaces each 750 x 420 mm, drive spindle speed range 50-6000 min-1, tool holder steep taper SK30 system HK, drive power DC motor 10.5 kW, torque approx. 40 Nm, tapping M16, feeds infinitely variable 10-8000 mm / min., inputs y and x axis 12 m / min., z axis 8 m / min, Capacity 2 x 12 tools, max. tool diameter 50 mm, max. tool length 320 mm, coolant system can be switched on and off automatically via program, delivery rate 75 l / min., operating voltage 3 x 380 V 50 Hz, control voltage 220V 50 Hz, total connected load 15 kW, fuse protection for the entire system 30A. Large tool kit and plenty of accessories. Cgeb Hljtzakwe H Ikst Machine can be tested under power in advance. Loading possible on collection via overhead crane.

Condition: excellent (used), Year of construction: 1986, bore diameter 65 mm throat 380 mm Control PLC-Steuerung bore spindle turning speed range 63 - 1600 U/min Cjb Hl Heucgqqe Ikjgt table-size 630 x 500 mm rapid traverse Z-axis 4,75 m/min boring feeds: 0,05 - 0,56 mm/U total power requirement 9 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch

Condition: good (used), Max. drilling capacity ∅20 mm/ 600 N/mm2 Total stroke 125 mm Working stroke, continuously adjustable 125 mm Feed force at 6 bar 4130 N Max. transferable. Torque 80 Nm Speed range at 50 Hz 360–5800 min-1 Speed range at 60 Hz 432–6960 min-1 Max. permissible speed 8000 min-1 Feed rate 30–2400 mm/min Air consumption 0.45 l/cm stroke Concentricity 0.01 mm Cob Hl Hjvxryho Iksgt Tool holder – standard ISO 30 / HSK 50 Inductive limit switch 24 V Normal voltage 230/460 V Motor speed at 50 Hz 2900/1450/970 min-1 Motor speed at 60 Hz 3480/1740/1160 min-1 Motor power at 50 Hz 1.5 kW / 1.1 kW Motor power at 60 Hz 1.8 kW / 1.3 kW Weight / color 73 kg / RAL 5012

Condition: used, Year of construction: 2001, bore capacity in steel (diameter) 32 mm throat 322 mm bore stroke 180 mm table-size 500 x 370 mm spindle taper MT 4 number of spindle speeds 55- 5000 UpM Control Software Spezial total power requirement 3 kW weight of the machine ca. 0,52 t dimensions of the machine ca. 1 x 1 x 2,35 m column type drilling machine with additional turret head ARBO 20. Machine comes Cgjb Hleu Rt Iuo H Ikot with spare parts.

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs Cgebeu Id Rue Hl H Ikst opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: like new (used), Year of construction: 2015, Ficep Orient 1202DD Drilling machine Automatic CNC single - spindle drilling lines This machine has been completely cleaned and checked Section size [min. mm] 80 x 10 Section size [max. mm]1220 x 610 Drilling heads [no.] 1 (2) Drilling tools per head [no.] 6 (12) Drilling diameter [max mm] 40 Spindle power [kW] 31 Spindle speed [max.RPM] 5000 Machine weight [kg] 6000 Input and output of the brand Kaltenbach. Input: 20M Output: 20M For more information, please contact us Cgjb Hov Iazfjl H Ikot

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: N/A, feed length Z-axis: 200 mm, drilling capacity: 16 mm, type of input current: AC, control cabinet height: 1,800 mm, overall weight: 300 kg, spindle speed (max.): 1,000 rpm, power of the servo motor: 3,000 W, Its a multihaed special drilling machine Ceb Hl H Ijwdbh Rskjgt

Condition: used, TECHNICAL DETAILS Ceb Hlsuhabte H Ikogt - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: good (used), 12-head drilling machine for sale, Table size: 400 x 360 mm Ceb Hopy D Dwol H Ikogt

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 30/35 mm throat 300 mm bore stroke 140 mm table-size 700 x 500 mm spindle taper MT 3 Cjb Hlou Rt Hqs H Ikegt number of spindle speeds 65 - 1750 UpM total power requirement 1,7 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1 x 1 x 2 m Pillar drilling machine.

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Ceb Hsikrtqsl H Iksgt Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: like new (used), Year of construction: 2011, Ficep Automatic Drill & Raveel 1104 DFRC This line is fully automated All two machine have been completely cleaned and checked. Ficep Drill 1104 DRFC Year built: 2011 Weight 15,000 Ficep Raveel machine 1101 FRC Year built: 2017 The pincher has a single clamp Length input and output: Cjbet Tmdgs Hl H Iksgt Input: 18 Meters Output: 15.3 Meter Also there is a document added there are all the specifications on it. If you want more pictures or information please contact us.

Condition: good (used), Handpieces, for flexible shaft machine, quill machining unit, drilling machine, drilling machine, pillar drill, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Suhner -Drawing No.: 010 281 02 -without: drive -Hole: Ø 14 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 140/33/H33 mm -Weight: 6 kg/piece Cgsb Hljcgan Te H Ikjt

Year of construction: 1993, Condition: ready for operation (used), Drilling machine Schüco 293784, built 1993, for drilling door hinges, 8 drill shots, Cgeb Hl Hed R Sdye Iket

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Ceb Hljfu Itbj H Ikjgt Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine Cob Hlsgd Ipkj H Ikogt - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: like new (used), Year of construction: 2011, Ficep Automatic Drill & Raveel 1204 DFRC This line is fully automated Csb Hjt Dv N Hol H Ikjgt All two machine have been completely cleaned and checked. Ficep Drill 1204 DRFC Year built: 2011 Weight 15,000 Ficep Raveel machine 1201 FRC Year built: 2017 The pincher has a double clamp Length input and output: Input: 28M Output: 28M Also there is a document added there are all the specifications on it. If you want more pictures or information please contact us.

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine Cgobecgqdfs Hl H Iket -Max. Feed stroke: 150 mm -Drive: 1.1 kW 2750 rpm -Thread: M8 -Number: 3x drill heads available -Price: per piece -Dimensions: 700/180/H180 mm -Weight: 26 kg/piece

Condition: new, Year of construction: 2024, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Cjb Hl Hsgwt Sle Ikegt Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm insert sheets Struts for stabilization switch cabinet Available options: Minimum quantity spray system with spray head and holder Gripper tongs for clamping the material on the stop plate

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed: stroke 150 mm Cjb Hleci Ahte H Ikegt -Drive: 1.5 kW 2750 rpm -Admission: thread -Number: 1x drill heads available -Price: per piece -Dimensions: 700/200/H180 mm -Weight: 18.3 kg/piece

Condition: new, Year of construction: 2024, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. Cgjb Hl Hjfu Swxs Ikst 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Multi-spindle head, multi-spindle drilling head, drilling gear, feed drill -Manufacturer: Desoutter, AFD - AUTOMATIC FEED DRILLS AND TAPPING TIPS Cgeb Hl H Ijra Rntokjt -Type: AFDE-40 -Speed: 3800 rpm -Multi-spindle head: Desoutter type 174183 distance 10 to 67 mm -Engine: ABB 0.33 kW -built-in collets: Ø 3 mm -Quantity: 1 piece available -Dimensions: 890/220/H150mm -Weight: 12kg

Condition: new, Year of construction: 2024, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Cgsb Hl H Iofu Iwmskjt Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.