Used Rubber Belt Shot Blasting Machine for sale (71,449)

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 571 EIT 9106/1149, clamping force: 2,500 kN, Injection molding machine REP S, floor dimensions 500 x 630 in working condition with clamping force 250t and injection capacity 968 cm3 Guedsyb Icbspfx Al Aod

Year of construction: 2021, condition: ready for operation (used), A Timesavers (Grindingmaster) wide belt grinding machine with two upper wide belt grinding units and one brushing unit is available. Contact roller diameter: 180mm/280mm, grinding belt accuracy: 0.01mm, brushing unit outer diameter: 300mm, brush oscillation: 150strokes/min, brush motor speed range: 8m-22m/s, table height adjustment: 1mm-100mm, grinding belt dimensions X/Y: 1630mm/2620mm. Machine dimensions X/Y/Z: approx. 4300mm/2650mm/2650mm, weight: approx. 5500kg, control: Siemens PLC. Including one IEP nanofilter cartridge extraction system. Documentation vorhanden. An on-site inspection is possible. Godpfxjy D Tq Ro Al Aeud

Condition: used, Year of construction: 2011, machine/vehicle number: AVZ80-160-315/29264/11-01, Adelmann Umwelt GmbH Rubber shredder Gusdpfeuab Dmox Al Aed

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Godjwdgpgjpfx Al Asud

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. Gujdjwdgrzjpfx Al Aed The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: new, Year of construction: 2026, CORMAK SM150D Belt Grinder The CORMAK SM150D belt grinder is an industrial machine designed for intensive operation in production plants, locksmith workshops, and tool rooms. It is a metal belt grinder that combines high grinding efficiency with an effective dust extraction system, ensuring safety, cleanliness, and comfort in everyday use. Its solid steel construction and large worktable surface guarantee stability and precision, even when processing large components. Main Advantages Two belt speeds (14.5 / 29 m/s) – allows adjustment of speed to the type of material and nature of work (coarse or finishing grinding). Integrated dust extraction system – ensures a clean and safe working environment without the need for external dust collection units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large worktable (480 × 150 mm) – allows comfortable handling of larger workpieces. Stepless grinding angle adjustment – enables precise positioning of the belt relative to the workpiece. Quick belt change system – minimizes downtime and improves work efficiency. Design and Technology The stationary CORMAK SM150D grinder is built on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The integrated extraction system provides highly efficient removal of dust and grinding debris. A 2.8 kW motor delivers sufficient power for demanding machining tasks. Precision and Efficiency Thanks to the use of a 150 mm wide and 2000 mm long belt, the machine provides a large contact surface, reducing processing time and increasing efficiency. The two belt speeds allow for a quick switch from aggressive material removal to fine surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the work cycle. Applications The CORMAK SM150D metal belt grinder is suitable for use in: production plants working with steel, stainless steel, and aluminum, welding and locksmith workshops, Guodpfx Asxrzgtjl Aed surface preparation and finishing departments, grinding edges, welds, and flat surfaces. Standard Equipment Stable steel base with tilt adjustment Grinding belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection cover Adjustable protective shield Technical Specifications Parameter Specification Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 14.5 / 29 m/s Motor speed 1400 / 2800 rpm Motor power 2.8 kW Machine dimensions (L × W × H) 700 × 540 × 1130 mm Weight 90 kg Power supply 400 V Extraction port diameter 2 × Ø100 mm Worktable dimensions 480 × 150 mm Chip bag diameter Ø100 mm Chip bag length 500 mm

Condition: new, Year of construction: 2026, NEW ON THE MARKET! Universal belt grinding machine with extensive standard equipment and the ability to work vertically and horizontally. quick & easy replacement of the sanding belt quick & easy adjustment of the grinding angle quick change of the head position in the vertical-horizontal area Smooth speed regulation with RPM indicator 550W brushless motor Shock absorber to dampen vibrations during operation, regulates the tension and adherence of the belt to the material Aluminum drive wheel Aluminum guide rollers with bearings Belt covers in accordance with CE standards Steel supports allowing for precise pressing of the workpiece to the tape Guodpfx Ajvu Ukhel Ajd Technical data Power 230V Engine 0.55 kW Tape speed 12-34 m / s Tape dimension 50x1000 mm Weight 20 kg Dimensions 440x340x420 mm

Condition: new, Year of construction: 2026, Universal belt grinding machine with rich standard equipment and the ability to work vertically and horizontally. Machine description easy and quick change of grinding tools easy and quick setting of the grinding angle easy and quick change of grinding belt quick change head position in the vertical-horizontal range Technical parameters Belt speed 14,5 / 29 m/s Belt dimensions 75 x 2000 mm Voltage 400 V Motor power 1.5 kW / 2.2 kW Weight 110 kg Maximum tube diameter 60.3 Equipment rubberized wheel Ø200 mm tool with sliding support and rollers 120 x 90 mm pipe grinding vice with adjustable angle 0-30° Gujdpfsvu Ukzsx Al Ajd rollers set: 20; 21,3; 26,9; 33,7; 42,4; 48,3; 60,3 mm grinding belt 75x2000 mm

Condition: new, Year of construction: 2026, Professional belt grinder CORMAK BS 150-200 for rough grinding and polishing of metal. Suitable for various shapes and materials. The size of the sanding belt is 150x2000 mm and the powerful 3 kW motor make it universal in its applications. Characteristics of the BS150-200 belt sander CORMAK BS150-200 belt sander with extraction - excellent combination of performance and stability. Equipped with a solid and rigid steel base , it ensures reliable stability during operation. With one working speed, precision sanding becomes easier than ever before. Adjustable, stepless grinding angle with lock allows precise setting and maintaining the optimal position. The large grinding surface facilitates manipulation and grinding of various workpieces. Additionally, the belt sander is standardly equipped with an effective extraction system , eliminating dust and ensuring a clean and safe working environment. Good stability thanks to the strong and rigid steel base Two working speeds Adjustable grinding angle with lock The large grinding surface makes it easier to grind workpieces Equipped with extraction as standard Product parameters: Gujdpfevu Uqnox Al Aed Dimensions of the abrasive belt (L x W) [mm] 2000x150 Belt speed [m/s] 15/30 Engine speed [rpm] 1400/2800 Engine power [kW] 2.5/3.0 Weight [kg] 117 Dimensions (L x W x H) [mm] 1000x650x1150 Power supply [V] 400 Extraction motor power [kW] 0.37

Condition: used, Year of construction: 2025, A universal mobile belt grinder designed for grinding/polishing elements that may be impossible to transport due to their size or weight. Machine description Excellent device stability. Adjustable depth stop Easy and convenient operation Designed for grinding/polishing elements that are difficult to transport due to their dimensions Highly effective in grinding or polishing welds near the floor Technical parameters Motor (kW) 2.8 Contact wheel (mm) 195x150 Steering roller (mm) 195x150 Flat grinding (mm) 150x450 Tape size (mm) 2000x150 Belt speed (mm) 15/30 m/s Working height (mm) 475-1240 Weight (kg) 85 Packaging (cm) 750x1100x800 Guodoxpvknjpfx Al Asd WARNING!!! THE MACHINE IS RETURNED, COMPLETE. NO ORIGINAL PACKAGING. NO WARRANTY.

Condition: new, Year of construction: 2026, The CORMAK SM75DC belt grinding machine is a high-efficiency industrial metal belt grinder designed for professional metal surface processing where precision and effective dust removal are equally important. Thanks to the integrated extraction system, solid steel construction, and large working surface, the SM75DC model performs excellently in production plants and metal workshops, ensuring a clean and safe working environment. Main advantages of the machine Extraction system with 860 m³/h capacity – effectively removes dust and metal particles during grinding. Two belt speeds (14.5 / 29 m/s) – enable optimal adjustment of grinding speed to the material being processed. Stable steel base – provides rigidity and vibration damping, improving both working comfort and surface quality. Adjustable grinding angle with lock – allows precise positioning of the belt to the workpiece. Quick abrasive belt change system – minimises downtime during retooling. Spring-loaded belt tensioning system – ensures automatic and stable belt tension throughout the operation. Gedsycqitspfx Al Asud Design and technology The CORMAK SM75DC belt grinding machine is designed for continuous operation under demanding industrial conditions. The rigid frame made of thick-walled steel, solid base, and precision belt-tensioning mechanism ensure both stability and long service life. The built-in dust extraction unit with two Ø100 mm nozzles significantly reduces workplace contamination and protects the operator. Precision and performance Equipped with a 75 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area for fast material removal and high-quality surface finishing. Two operating speeds (14.5 and 29 m/s) allow the operator to match the speed to the work material – from rough grinding of structural steel to fine finishing of aluminium or stainless steel components. Applications The stationary CORMAK SM75DC belt grinding machine is ideal for: production and industrial facilities, locksmith and welding workshops, surface preparation and finishing operations, deburring, weld grinding, and surface preparation before painting or galvanising. Standard equipment Stable steel base with adjustable tilt Abrasive belt 75 × 2000 mm Built-in dust extraction system with 0.55 kW motor Anti-spark and dust shields Tilting protective guard Technical data Abrasive belt dimensions (L × W) 2000 × 75 mm Belt speed 14.5 / 29 m/s Motor speed 1420 / 2840 rpm Main motor power 2.2 kW Extraction motor power 0.55 kW Extraction capacity 860 m³/h Extraction nozzle diameter 2 × Ø100 mm Power supply 400 V / 50 Hz

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Gujdpfxjpmtb Ro Al Ajd

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 23 03 28 / 1, functionality: fully functional, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min Gsdpjt Hvkvjfx Al Ajud - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm Gedpfx Aew Nbycel Ajud - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0204231, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, height adjustment type: electric, total length: 4,800 mm, total width: 1,500 mm, Kuhlmeyer ZBS 2 Grinding Machine / Belt Grinder – Year of Manufacture 2002 – Industrial Version For sale is a robust and powerful grinding machine, type Kuhlmeyer ZBS 2, built in 2002. This machine is manufactured in Germany and is specifically designed for industrial use in metalworking. Technical Data: Manufacturer: Kuhlmeyer Maschinenbau GmbH Type: ZBS 2 Year of manufacture: 2002 Machine No.: 0204231 Connection voltage: 400 V Control voltage: 230 V Connected load: 6.5 kW Rated current: 16 A Frequency: 50 Hz Compressed air: 6 bar Weight: approx. 2,500 kg Guodpfx Aoyvrtzjl Aed Description: The Kuhlmeyer ZBS 2 is a heavy-duty industrial belt grinder, ideal for grinding, deburring, and finishing metal components. Thanks to its sturdy construction and high own weight, the machine runs extremely smoothly and enables precise processing results, even on larger workpieces. Features & Equipment: - Massive, long-lasting construction - Suitable for continuous operation - Pneumatic components (6 bar required) - High grinding capacity with 6.5 kW drive - Made in Germany – proven industrial quality Condition: Used, fully functional. Age- and use-related signs of wear are present, but technically ready for operation. Areas of Application: - Metal fabrication - Stainless steel processing - Grinding and finishing work - Industrial and workshop use Other Information: Viewing by appointment possible. Loading can be assisted. All information without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 2020, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, number of injections: 1, Excellent rubber injection moulding machine in mint condition, year 2020. Very few operating hours, in mint condition. Closing force 600 tons Injection volume 2500 cc Heater blades 1200 x 1300 mm FIFO injection system 2500 bar Guodpfx Aljtu H Ste Aod Core lifting moving plate Core lifter fixed plate Data backup on CF card Energy reduction by servo pump control

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. Gusdpfxsghaywo Al Ajd The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request.

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Gedpjxpiw Uofx Al Ajud Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear. Guodpetdpa Uefx Al Aod

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 32026, compressed air connection: 9 bar, overall weight: 60 kg, input voltage: 230 V, warranty duration: 12 months, Dry Ice Blaster GR II Gsdeyh Hr Sepfx Al Asud New device 10 kg ice hopper capacity 3 mm pellets 5 meter blasting hose LED light on the gun 7 mm round nozzle 25 mm flat nozzle 5 meter air hose Technical performance: 9 bar Max air flow: 4200 L/min Air pressure regulator: 1-9 bar Ice feed regulator: 0 - 70 kg ice per hour

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Gedemza S Eepfx Al Aoud Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: new, Year of construction: 2024, Rubber belt (steel reinforced) for shredder LINDNER Urraco 95. Gjdpovu Dddjfx Al Aoud

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Gedpfx Aloywuqrj Aoud Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: excellent (used), Hettich hinge boring machine, 380V power supply, vertical and horizontal drilling, 3 drilling heads, rotatable heads, parallel (row of holes) or perpendicular positioning, pneumatic feed of drilling head. The condition of the drill is very good. Godsyt Icljpfx Al Aoud

Condition: good (used), Year of construction: 2020, operating hours: 340 h, Technical specifications: • Year of manufacture: 08/2020 • Operating hours: 340 • Dry ice capacity: 18.2 kg • Feed rate: 0–2 kg/min • Dimensions: 91.4 × 50.8 × 101.6 cm • Weight: approx. 117 kg • Air consumption: 1.4–4.7 m³/min at 5.5 bar • Blasting pressure range: 1.4–17.2 bar Includes hose package, gun, and round nozzle. Godpfjywawwox Al Ajud Net price plus 19% VAT.