Used Samzon Pile Turner for sale (514)

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Lajdpfjzcfhdjx Afuoc

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Ljdpfx Aozatf Esfusac Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Lsdpfx Aexybdhsfueac Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Pallet stackers or dispensers are used for automatically stacking and destacking of empty pallets to a complete pile. Those empty pallets can be loaded by any pallet truck or forklift. (similar to green palomat) Type PD15 In very good condition Capacity: 15 europallets Dimension pallet : 1200 *800 mm Ledpog Du Epefx Afujac Dimension machine : 1.600x1.370x2.170 mm Control: electrical on 220V (single phase) no need for compressed air

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Lsdpfexd U Saex Afuoac Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: ready for operation (used), Year of construction: 2008, operating hours: 88 h, PCS-H: console for ink and register control with touch panel Electronic double sheet detection Electronic missing sheet detection Photocells Automatic ink regulation from console RyobiMatic-D: alcohol dampening with variable speed Technotrans refrigeration unit Lajdpjy H Elxjfx Afusc Automatic washing of blankets and rollers Semi-RPC: semi-automatic plate changer Circumferential, axial and diagonal registers Extended delivery High pile delivery GrafiX powder sprayer Books and tools 88 million impressions

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, PCS-G control desk, IVS - Ink Volume Setting, Grafix dry spray > RYOBIMATIC dampening system, Ryobi RPC semi-automatic plate change > Preset - automatic size device > Suction feed board > Automatic blanket, roller and impression-cylinder washing device > High pile delivery, non-stop delivery Technotrans LED UV dryer Ljdpey Hx Imefx Afueac Interdeck between 1st and 2nd unit 45 million

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Minimum Creasing Distance: 0.1 mm A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Net Weight: 180 kg Dimensions: 150 x 75 x 120 cm Ledey Spaqopfx Afusac

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Transmission: Clark 4-speed automatic Condition: Ready for operation and fully functional Technical condition: Good Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Ledpfx Aey S Hciefuoac Piggy-back, hydraulic pile slope on spreader, hydraulic sliding cabin

Condition: used, operating hours: 20,782 h, mileage: 1,93,509 km, power: 130 kW (176.75 HP), first registration: 04/2006, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 3,000 kg, empty load weight: 12,000 kg, wheelbase: 3,260 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, fog lights, immobilizer system, low noise, onboard computer, seat heater, traction control, trailer coupling, German vehicle, single owner, documentation available, only 193,509 original km, ONLY 20,782 operating hours, condition as per photos. Equipped with Bucher Schörling Cityfant 60 sweeper body, ideal for cleaning gutters, multiple-lane roads, traffic islands, roundabouts, and large surfaces. Features right-hand disc brush and central roller brush, with a hydraulic suction hose boom for cleaning gullies and waste bins as well as collecting leaf piles. Includes front spray bar, 6m³ debris container, 1,500-litre fresh water tank, separate Mercedes engine. Sweeping speed (work mode) up to 18 km/h (instead of 12 km/h). Debris container with V2A stainless steel floor tray. Municipal mounting plate with hydraulic connections, trailer coupling with electrical & hydraulic connections, municipal lighting and headlamps, air conditioning, air-suspended comfort seat, cab with 2 seats, seat heating, manual transmission, roof hatch, beacon, leaf/air suspension with lift and lower function, electric windows, differential lock, electrically heated mirrors, radio CD, EasyDrive (hydrostatic drive) (SN). Self-propelled street cleaning machine, wheelbase 3,260 mm, GVW 15,000 kg, unladen weight 12,000 kg, payload 3,000 kg. For sales to businesses and for export (both EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV approval, DGUV inspection, safety test, or UVV. Further trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspection of the goods, to prevent any misunderstandings regarding condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. Lasdpfjw Ulc Sox Afuec All information is provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: used, mileage: 4,15,441 km, power: 265 kW (360.30 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 14,075 kg, maximum load weight: 11,925 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,100 mm, brakes: engine braking, driver cabin: other, gearing type: other, emission class: euro5, number of seats: 2, operating hours: 4,201 h, Equipment: air conditioning, cabin, crane, cruise control, differential lock, seat heater, * German vehicle * Condition see photos * Meiller roll-off hook * MKG loading crane type HLK 171 * Radio remote control * 5th + 6th control circuit * Crane height 14.15 m * Grapple control * 2 hydraulic extensions * 2 hydraulic outriggers * 10.15 m = 1.20 t. * 8.20 m = 1.50 t. * 6.25 m = 2.00 t. * Only 4,201 operating hours * Complete crane inspection book available * Pile uncoiler type RK 2070 * Suitable for all containers up to 7.00 m * Pneumatic locking system * Hydraulically extendable underride guard * Steerable trailing lift axle * L - driver's cab * 2 air-sprung comfort seats * Seat heating * Air conditioning * Cruise control Lodpfsvhqpyex Afusac * Bluetooth telephone * Differential lock * Engine brake * Electric windows * Heated electric mirrors * Reversing camera with screen * Storage box * Mains box * Rotating beacons * Working lights * Wheelbase 5,100 mm + 1,350 mm * GVW. 26,000 kg. * Unladen weight 14,075 kg. * Payload 11,925 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, We are pleased to offer you the following machine, subject to its availability: PETRATTO METRO SD 78 - 2007 Equipment: • FEEDER SECTION: o Friction feeder for thicker paper o Flat pile feeder for thinner paper (envelopes, etc.) • Metro 78 FOLDING AND GLUING UNIT - Metro transport system with 4 programmable outputs - Small plough folder, left and right - Large plough folder, left and right - Folding buckle plate - Folding buckle plate for thinner papers - Turning device - Stream belt delivery with pressure roller • Double-sided adhesive tape applicators x 3 Lajdpfx Afoy Eda Ssusc Refurbished, with new rollers, bearings, and belts AVAILABLE: IMMEDIATELY LOCATION: Belgrade, Serbia Installed in Belgrade, Serbia. Testing possible.

Condition: used, No. 3130-02 Block bandsaw Primultini 1300 SG Used, year of construction approx. 1980 Right-hand version Roller diameter 1300 mm Blade support width 140 mm Saw blade 150 x 1.1 mm Clearance height with block carriage CFA according to drawing 1075 mm Cutting height with block carriage CFA according to drawing 700 mm Cutting width with block carriage CFA according to drawing 530 mm Electric blade guide and blade tensioning Main motor 380 V, 50 HP Laodpfx Afsurmvaouoc Block carriage PRIMULTINI CFA, length 8000 mm 5 automatic clamping blocks Electric closing and opening of the hooks Electric clamping and adjustment Hydraulic feed by means of cable pull Electro-hydraulic block turner with 2 arms System already dismantled Electrics and controls must be partially replaced Total weight approx. 10 tons Sale on behalf of customer, ex location near 92660 Neustadt, without transport and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Laedpfx Aozbtq Rjfuec Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos

Condition: excellent (used), color: green, lifting height: 33,000 mm, Year of construction: 1998, operating hours: 8,137 h, Drivetrain Make of engine: Mitsubishi Weights Empty weight: 52.000 kg Functional Mast: lattice Mast length: 3.300 cm Lifting capacity: 50.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: CC00261 Other information Delivery terms: EXW Counterweight: 17000 Production country: JP Min boom length: 910 cm Additional information Please contact Christiaan Dekker for more information = Additional options and accessories = - Hook blocks = Remarks = Make: Kobelco Type: BM500 Serial number: GG00261 Year: 1998 Colour: Original green Operating hours: 8,137 h Engine: Mitsubishi 6D16-TE1 Output: 132 kW (180 HP) Undercarriage: Crawler Track type: Flat shoes Shoe width: 760 mm Max lifting capacity: 50 T Lifting capacity @ radius: 50 T @ 3.8 m Main boom: 33 meter lattice boom Winches: - Main hoist winch: double drum, 22 mm rope - Auxiliary hoist: 22 mm rope - Boom hoist: 16 mm rope - Free-fall function on winches Ledpfxjzc N Sgo Afuoac Line pull: - Max available line pull: approx. 17 T Hook blocks: - 2 hook blocks included Swing speed: 3.7 rpm Travel speed: - High: 2.2 km/h - Low: 1.4 km/h Counterweight: approx. 17 T Operating weight: approx. 52.6 T Cab: Enclosed operator cab with good all-round visibility Additional: - Strong and reliable foundation crane - Suitable for heavy duty lifting and piling work - Simple and robust hydraulic system - Easy maintenance access

Year of construction: 1995, condition: used, machine/vehicle number: ref. BM4933, Ref. BM4933 top machine! This machine puts inserts into envelopes Inserter stations (2) safety features double-/missing sheet detection air suckers feed from bottom of pile envelope counter Laodobzlzxepfx Afusc Insert dims 156x244 to 84x114mm envelope dims max 156x244mm min 89x171mm working speed up to 10.000 envelopes/hr variable speed adjustement

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 Lsdsy Na Hvspfx Afuoac TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a Lsdpfxowh Rvre Afueac particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

Condition: good (used), Year: 2014 Size max 360 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3697 Description: - air pump - blower - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III Lsdpfjzbux Nex Afueac - ASAC automatic self adjusting calliper - 10 Stream feeders 3741 - 3 Bundle clamp: Müller Martini Bundle clamps - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book Block feeder base - Transfer into the binder Perfect binder Müller Martini Corona C15 S/36 (18") Year: 2014 Description: - Book Data Center BDC - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: Robatech MOD - Stream cover feeder - Scoring station - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 70 meters - Escape delivery Three knife trimmer Müller Martini 3675 Orbit Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini 3632 CB 18 Description: - Compensating stacker - Delivery to the left and right Pile tacking device Müller Martini 457 Option: - 2 Card gluer

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 2,900 mm, total width: 620 mm, total height: 1,500 mm, for approx. 100 E2 crates/hour incl. crate turner (single-person operation) System layout: 1. Zone – Main washing zone: – with a centrifugal pump with 2.2 kW (900 l/min at approx. 1 bar) distributed over a total of 50 stainless steel nozzles, which enable thorough cleaning of all 4 sides. A plate filter continuously cleans the washing solution and filters it continuously. – Tank volume 180 l – Washing temperature in the main washing zone 50-55°C The crate transport takes place via a spiral (KITZINGER utility model), which ensures precise crate separation and an unobstructed impact of the washing solution for comprehensive cleaning of all sides. 2. Zone – Rinsing area: – The products cleaned in the machine are thoroughly rinsed from all sides with fresh water. The fresh water must be at least 45°C when fed to the machine and is heated to approx. 80°C in the system. Approximately 250-300 l are required per hour. Technical data: – Overall length of the base machine: 2000 mm – with crate turner: 2500 mm – with crate turner and discharge table: 2900 mm – Machine width: 620 mm – Machine height: 1500 mm – Washing tunnel passage width: up to 430 mm (adjustable) – Washing tunnel passage height: 330 mm – Total heating power: boiler 1 x 10 kW – Pump power: 2.2 kW, 900 l/min at 1 bar Lasdpfsza Dvuox Afuec – The housing is completely welded and consists entirely of stainless steel. The substructure is largely made of 3 mm sheet metal and is therefore very durable. The machine has the following connections: – Fresh water at least 45°C, 3/4″, – Flow pressure at least 1, max. 6 bar via hose connection, – Consumption approx. 300 l/h, IMPORTANT: the machine requires warm fresh water, connection 1/2″ or 3/4″ – Electricity 14 kW, 400 V, 50 Hz, 32A fuse – Wastewater DN 40 to floor drain or channel near the machine, below the machine tank with standpipe – with main switch – powerful centrifugal pump – system on stainless steel rollers – sloping discharge side for returning water to the bottom of the crates

Year of construction: 2004, condition: used, machine/vehicle number: 1224400758 , Palletfeeder PD 78 Tremat Flat Pile Feeder 4 Buckles (manual) Lasdpfx Aek Izqzofusc 3 Folding Knives Up to 32 pages folding

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets Lodpeyuuzdefx Afuoac • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Ljdpfx Asu Tipksfusac Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Laedpfx Afeuvi Sajuec Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Horizon APC-T61 Hydraulic guillotine Ledpfey E Ey Hjx Afujac The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.