Used Schüco Four-Head Press for sale (22,638)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17650001, functionality: fully functional, power: 34 kW (46.23 HP), pressing force: 250 t, stroke length: 400 mm, throat depth: 250 mm, working width: 3,100 mm, TECHNICAL DETAILS Number of axes: 8 Press force: 250 t Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Max. stroke: 400 mm MACHINE DETAILS Control system: Bystronic ByVision Power: 34.0 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 EQUIPMENT Crowning system: CNC-controlled Ram holder: Hydraulic Tool holder type: WILA standard Tools included Documentation CE marking and certificate Lodjzk Dv Ispfx An Isad Additional finger stop Stroke assistance Finger protection Offline software

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 22093, functionality: fully functional, volume flow: 4,000 m³/h, filter area: 24.7 m², total height: 3,420 mm, total length: 2,000 mm, overall weight: 725 kg, TECHNICAL DETAILS Filter area: 24.7 m² Volume flow rate: 4,000 m³/h Negative pressure: 2,110 Pa Suction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar MACHINE DETAILS Connected power: 5 kW Motor power: 4 kW Lodpfezktr Ejx An Ioad Rated speed: 2,925 rpm Rated operating voltage: 400 V Type of current: Three-phase (3 Ph) Rated current: 9.2 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 3,420 mm Weight: 725 kg EQUIPMENT New filters

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: A7879, functionality: fully functional, pressing force: 70 t, overall weight: 3,000 kg, opening width: 400 mm, TECHNICAL DETAILS Total pressing force: 70 tons Specific pressing force: 2.5 - 3.5 kg/cm² Opening width: 400 mm MACHINE DETAILS Control: Push-button control for opening, closing, and stopping Drive: Electro-hydraulic Heating plates: Aluminum Dimensions of heating plates: 2,550 x 1,100 mm Heating: Electric Hydraulic cylinders: 4 Diameter of hydraulic cylinders: 80 mm Laodpfjzktpqsx An Isd Rated voltage: 380 V Type of current: 3~ Frequency: 50 Hz Control voltage: 220 V Rated current: 21 A Power: 13.6 kW Dimensions & Weight Shipping dimensions: 2,900 x 1,400 x 2,000 mm Weight: 3,000 kg EQUIPMENT Safety pull cord Pressure monitoring (Automatic adjustment) Adjustable limit switch for specific opening width

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Ledpfezmfnqjx An Ijad Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: used, Year of construction: 2014, functionality: limited functionality, operating hours: 9,999 h, type of input current: AC, year of last overhaul: 2024, Equipment: 3rd hydraulic function, documentation/manual, 5Ton-1, -Supreme 10Ton-01 , - Rajindra Laedszlg Snspfx An Ied 50Ton--05- Rajindra ,GREWAL , Shri Balaji , Supreme

Condition: excellent (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 31765 B, color channels: 5, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 744 mm, paper height (max.): 592 mm, counter reading (color): 2,50,00,000, Key Technical Features & Benefits Maximum Production Speed: Runs up to 18,000 sheets per hour, ensuring you hit even the tightest deadlines. Substrate Flexibility: Effortlessly handles different gsm materials It’s a true "all-rounder" for paper and thick cardboard. Large Transferters: Double-diameter transfer cylinders and impression cylinders ensure "mark-free" printing and a smoother sheet travel path. Quick Start-Up: Features advanced automation for plate loading and wash-ups, significantly reducing make-ready times and substrate waste. Pecom Control System: Integrated console for precise remote ink and register control, ensuring color consistency across long runs. Ergonomic Design: Low-profile construction for easier access and maintenance compared to taller competitors. Automation: PPL (Power Plate Loading) / Automatic Wash-upInking Units: 16-roller high-performance inking system All units are UV Prepared 1 UNIT UV INTERDECK PLUS END OF PRESS UV Lodpfxey Ipmvj An Iead Also has an IR DRYER

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies Lasdjza Rm Tspfx An Ijd - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: new, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: central locking, cruise control, fog lights, spoiler, = Additional options and accessories = - CD - Immobiliser - Spoilers - Sun visor - Tachograph = Remarks = Country of origin: SPAIN Displacement: 11,120cc Brakes: Electronic Braking System Emergency Brake Assist Construction: Tractor Head ADblue tank 135L LED daytime running lights Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP Lane Departure Warning System Model: AS440S46T/P Exterior Color: White Laodpfx Aoy Tymdsn Iod Cylinders: 6 Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM Ledpfx Anjy Tylgo Isad STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 470 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, table width: 900 mm, table length: 3,200 mm, throat depth: 400 mm, Equipment: safety light barrier, Machine type Electro-hydraulic servo numerical control bending machine Order Type Non-Standard Basic parameter Pressure 220t Workbench length 3200mm Workbench height 900mm Column spacing 2500mm Throat depth 400mm Slider stroke 200mm Maximum opening height 470mm Fast descent speed 120mm/s Return speed 120mm/s Work speed 10mm/s Rear gauge (X-axis travel) 550mm Maximum operating speed of the X-axis 400mm/s X-axis positioning accuracy ±0.05mm X-axis repeat positioning accuracy ±0.02mm Y-axis positioning accuracy ±0.02mm Y-axis repeat positioning accuracy ±0.01mm R-axis stroke 100mm Maximum operating speed of the R-axis 100mm/s Working accuracy: Straightness ±0.2mm/m, angularity ±0.5°/m KW Main motor power (servo motor) KW 22KW Rated power (servo motor) KW 25.03KW Fuel tank capacity 200L Oil product model 46# Hydraulic Oil" Overall dimensions (length * width * height) 4200mm*1950mm*2700mm Lajdpfx Anszgzt No Isd Weight 12T

Condition: used, Year of construction: 2007, machine/vehicle number: 1593, functionality: fully functional, pressing force: 400 t, stroke length: 300 mm, table width: 1,200 mm, table length: 800 mm, ram plate width: 1,150 mm, ram plate length: 600 mm, overall weight: 44,000 kg, DMS 40 Mechanical Press Lodpozhuk Refx An Ioad 400 kN 25 strokes per minute Max capacity 9500 kg Max die dimensions 1150x500 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press 800ton with overhead hydraulic tank and robot loading system. Lasdpfxozhugxj An Ied

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners Lasdeznv A Ujpfx An Ijd - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: excellent (used), Year of construction: 2001, Manufacturer: LVD Laodpey Sk R Dofx An Ied Type: PPEB 170/42 Year: 2001 Serial number: 27755 Maximum pressing force: 170t Bending length: 5m Number of axes: 4

Condition: excellent (used), Capacity: 2.5 tons Lajdpfxsw U Aure An Ied Year of manufacture: 2017 Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Transport wheels included Tools not included in delivery

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Lodpfx Anjzmu N Rj Ioad Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Ledjzmu E Eopfx An Ioad Controlled by an electric foot pedal. Waste is directed to an external sleeve. The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Ledpfozmu Erox An Ioad Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Laedpfxozmu Efj An Iod Made in Germany.

Condition: excellent (used), Year of construction: 2009, Press force: 100 tons Bending length: 2050 mm Stroke: 215 mm Open height: 500 mm Throat depth: 400 mm Distance between columns: 1700 mm Rear bumper: X-R-Z Motor power: 7.5 kW Lsdpjzclczefx An Ioad Weight: 7400 kg Year of manufacture: 2009

Condition: excellent (used), Year of construction: 2011, Bystronic Xpert 150 press brake with Bystronic CNC control, bending length: 4100 mm, Laedpoyrnfdofx An Ied max. force: 1500 kN, max. stroke: 215 mm, automatic stops, Bystronic Fast Bend laser system. Serial number: 11530057 (2011). Machine weight: 11,800 kg. Country of origin: Germany. Axes: Y – Raise/lower beam X – Adjustment of approach and bending distance R – Approach/retract position 2 x Z – Lateral and relative positioning 1 x Z – Manual feed

Condition: excellent (used), Year of construction: 2008, pressing force: 100 t, Press force: 1000 kN (100 tons) Bending length: 2050 mm Stroke: 215 mm Opening height: 500 mm Overhang: 400 mm Column spacing: 1700 mm Back gauge: X, R, and Z axes Accuracy of Y-axis: ±0.004 mm Motor power: 7.5 kW Weight: 7400 kg Lajdpfx Ajzclc Isn Isd Year of manufacture: 2008

Condition: excellent (used), Year of construction: 2020, Edwards Pearson EPT-CNC-ECO-174x3200 Press Brake Serial number: 201105B Year of manufacture: 2020 Axes: Y – Beam up/down movement X – Adjustment of back gauge and bending distance R – Back gauge up/down movement Crowning – Bending angle compensation Lasdpfx Anjyrnfqe Ied Machine with EP10 control, 1750 kN nominal force, 3200 mm maximum bending length, Lintech SLA-3 laser protection, Wonder Foot control, and an extensive tool set.

Condition: excellent (used), Year of construction: 2021, Bending length: 4100 mm Pressing force: 240 tons Equipped with a comprehensive tool set for bending Manufacturer: Baykal Lsdeymldgopfx An Ijad Model: APHS 41240 Power supply: Three-phase Year of manufacture: 2021 Serial number: 28635 Axes: Y – Raise/lower beam X – Adjustment of approach and bending paths R – Approach/descent Bending angle compensation

Condition: excellent (used), Year of construction: 2006, Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical data: Maximum pressing force: 2,200 kN (220 tons) Working length: 3,050 mm Width between uprights: 2,600 mm Maximum ram stroke: 450 mm Max. table overhang distance: 685 mm Feed (overhang): 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: adjustable Hydraulics: Bosch / Rexroth SYDFE1 Laodpfsyhdyijx An Ijd Oil tank: 350 l Other specifications: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Axes: Y-axis – Upward and downward movement of the beam X-axis – Approach and bending distance adjustment R-axis – Approach and downward movement 2 x Z-axis – Lateral and counter movement stop 2 x Z-axis – Forward and backward movement with slight inclination of the X-axis V-axis – Easy-Form laser crowning – bending distance compensation