Used Screw Compressor 55 Kw Variable55 for sale (44,297)

Condition: used, Year of construction: 2006, functionality: fully functional, cooling capacity: 57 kW (77.50 HP), Trane CHHP0L1TKE0N057A refrigeration compressor several units for sale/ ct1968 Manufacturer: Trane Type: CHHP0L1TKE0N057A Refrigerant: Freon Refrigerant type: R134A Power: 57kW, 400V, 50Hz, 3 phases Dimensions: 1000x630x570mm Several pieces, for sale from stock Gedpfeubakuex Aatjbt

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Gbjdpfx Aeudy Sdjatst

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Gjdpfx Aasvmivcetobt Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor Gsdpfx Aaow U U Scetobt - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. Gbjdpfjwnxziex Aatjt The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Gbodpfxol Dxmfe Aatjt

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR series, is the most modern solutions used in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee efficient and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Gsdeklz Syspfx Aatsbt Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision of workmanship. Solid construction, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 15 kW Voltage 400V/50Hz Efficiency 0-6 bar 2100 l/min Efficiency at 6 bar 2000 l/min Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Outlet 3/4" Dimensions 1080 x 750 x 1000 mm Weight 460 kg Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 Gbsdpjzi Dbhsfx Aatst YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD S/N AIF072891 YEAR 2001 POWER (kW) 181 OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 2 1/2 Gjdpfx Aajzq An Notjbt NEW/USED USED

Condition: used, Year of construction: 2016, Rated power: 132.0 kW Engine speed: 1,492 rpm Maximum operating pressure: 8.5 bar Gbedpfxszwgbaj Aatot Ambient temperature: 3-45 °C Operating hours (display): Approximately 64,834 hours / Load: Approximately 64,658 hours

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter Gjdpfszu Aibox Aatebt The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Gsdpfx Aaszwmlrotobt Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Godpsrkpp Hofx Aatebt Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: used, Year of construction: 2005, feed pressure 10 bar Gbjdpsvuz Rhefx Aatot liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. In working order. Ready for use. We have 3 units available. The price stated applies to 1 unit. The price listed in the advertisement is the net price, to which VAT must be added. Gbsdpfx Ajzhux Ioatst The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM.

Year of construction: 1997, condition: good (used), Build in 1997 Godpog A Dypsfx Aatsbt Power 75 KW Pressure: 9 bar

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Gsdpfx Aaezhw Rtetobt

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, Godpfx Aaszhux Uotjbt For sale: SCS 30-08A screw compressor. In good working order. Ready for use. The price stated in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW 9.75 bar 37.80 m3/min Gbedpfxjzhu Nao Aatot Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: excellent (used), Year of construction: 2017, operating hours: 10,846 h, functionality: fully functional, Screw compressor, Variable28 Inverter integrated. 28 kW 13 bar Gbodjznuf Ujpfx Aatot 4.24 m3/min Year of manufacture: 2017 Operating hours: 41,635

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE DSD202SFC S/N 1937 YEAR 2013 POWER (kW) 110 CAPACITY (m3/min) 4-17.3 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) Gbedpfxozu Inpe Aatot FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 5.2m3 COMPRESSOR 2019 DIESEL compressor ATLAS COPCO XAS 88 after full service Technical data: Gbederdf Swjpfx Aatot capacity 5.20 m3/min; working pressure 7 Bar; production year 2019; KUBOTA engine mileage 1519h!!! compressor fully operational net price: 58800 zł gross price: 72324 zł Below is a link to the video , showing the work of the machine

Condition: used, Year of construction: 1998, feed pressure 8 bar liter capacity 1,65 m³ / min dimensions 1000 x 750 x 950 mm Gedpfxsqa Tw No Aatobt total power requirement 11 kW weight of the machine ca. 175 kg

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Gjdomqlguepfx Aatobt Weight 120 kg Manufacturer: Cormak

Condition: like new (used), AIRPOL PR75 Screw compressor Excess pressure [MPa] - execution options: 0.75 / 1.0 / 1.3 Variable performance: Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740... Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740 Capacity min-max [m3 / h] [1.3 MPa]: 212 - 565 Compressed air connection: G 2 Ambient temperature [° C]: +5 ÷ +40 Cooling air demand [m³ / h]: 11700 Temperature of compressed air [° C]: about 10 above ambient temperature Sound level [db (A)]: 75 Transmission mode: direct drive Rated engine power [kW]: 75 Rated fan motor power [kW]: 4 Degree of motor protection: IP55 Supply voltage [V]: 400 Recommended cross section of the power cord [mm2]: 3x70 + PE Protection [A]: 160 Manufacturer: Airpol Model: PR75 Height: 2200 mm Width: 1500 mm Length: 1675 mm Goded S Udcepfx Aatsbt Weight: 1900 kg Total power: 75 kW