Used Semi-Automatic Nut Packing Machine for sale (81,577)

Condition: excellent (used), Year of construction: 2005, Automatic Stellite welding machine Iseli type SAA. For gang saw, circular saw, or band saw blades with central height adjustment. The saw blades are loaded fully automatically. An attached annealing unit anneals the saw teeth with high frequency. Blade thickness 0.8 - 3.8 mm Tooth pitch 13 - 115 mm Band saws 5600 - 14000 mm Circular saws 250 - 1200 mm Gang saws 80 - 160 mm Kedov Srx Depfx Apdjlu

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Kedjq Dzi Tspfx Apdslu Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 29,525 mm, total height: 1,980 mm, total width: 7,120 mm, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2036, power: 15.5 kW (21.07 HP), product height (max.): 250 mm, product height (min.): 28 mm, product length (max.): 2,800 mm, product length (min.): 300 mm, INSTANT-PACKING Safe and responsible packaging — just in time. CNC Carboard Series produce resource-friendly packaging solutions for the future of the wood-processing industry. This series produce made-to-measure cardboard boxes fully automatically and just in time. In a dynamic process, raw materials are used responsibly, thereby saving packaging and filling material in significant amounts. With the models of our cardboard box cutting machines, we have the right solution for every customer — from entry-level models up to high-performance machines, from standard use to complex packaging cutting. With this series, produce exactly the packaging that you need — in optimal form, with a high volume-utilization factor and the lowest possible unit costs. Kedpfxey N U Saj Apdjlu SEALMASTER box sealing machine provides economical and high quality bonding of the front, back and side covers of the FEFCO 410 box model, in which the product is placed in full automatic mode, together with the HOT MELT application. In combination with the various HOT MELT application heads, the glue line is precisely applied to the desired location, at the right length and in the right amount. For this reason, it can be adapted to customer requirements in the most appropriate way and reduces costs.

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Kjdpoyu Tu Aefx Apdjlu

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 4,350 mm, total height: 2,200 mm, total width: 1,920 mm, input voltage: 380 V, warranty duration: 12 months, air demand: 6 m³/h, year of last overhaul: 2036, roll width: 17 mm, film width: 17 mm, power: 1.5 kW (2.04 HP), product height (max.): 450 mm, product height (min.): 15 mm, product length (max.): 6,000 mm, product length (min.): 450 mm, Edda Olympia series of Horizontal Stretch Wrapping Machine with various models are well-known as the best solutions of packaging needs. All models are equipped with the latest technology. By the durable mechanical structure and required systems for operator safety, this machines compliance with European Union safety directives and are certified with CE Certificate. All standard components which used in machine are the best in their field as worldwide trademarks. Kljdpfx Ajy N Uzzjpdeu These machines are developed for a long and trouble-free servicing life and are produced with well-know, best quality components by our qualified staff. Edda Olympia Series packing machines are intented for easy packing of the products by the PE bubble nylon, PE foam film and PE strecth film materials.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 11,425 mm, total height: 3,382 mm, total width: 3,770 mm, input voltage: 380 V, overall weight: 1,200 kg, compressed air connection: 6 bar, year of last overhaul: 2036, power: 0.75 kW (1.02 HP), product height (max.): 2,500 mm, product length (max.): 3,000 mm, INSTANT-PACKING Klsdpfx Aey N Uvfopdeu Safe and responsible packaging — just in time. Automatic carton feeding station Ideal solution for creating boxes for products of different sizes with the lowest waste rate after positioning the cartons in the magazine, the operator manually places the Z cartons in the specified cassettes. After entering dimensions as height, width and length of the products with different sizes, the box will be cut with minimum wastage. Storage space is available as 3+3 and 5+5 as optional

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 6,750 mm, total height: 3,350 mm, total width: 3,700 mm, input voltage: 380 V, overall weight: 2,660 kg, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2036, roll width: 500 mm, film width: 500 mm, power: 6.2 kW (8.43 HP), product height (max.): 2,235 mm, product height (min.): 150 mm, product length (min.): 1,250 mm, The modern and optimal solution for window packaging. The window manufacturers often have difficulties and issues with packaging process, especially in large sizes. Lifting up, turning and moving the window makes job very hard, slow and dangerous. FRAMEWRAP is that solution which make the process easy, fast and safe. This equipment is designed specifically for those production areas where the window production process is run in an inclined way. The machine could be integrated to the production lines where the window will be fed to the wrapping station without changing the position of the window. The machine has motorized feeding system with automatic press unit which can fix sized dimensions of window. Kedpfey N S R Hsx Apdolu

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm Kodpfx Apoxducljdslu - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Kljdou Ic Hnepfx Apdeu Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: used, Year of construction: 2019, operating hours: 23,121 h, machine/vehicle number: 14505774804, Catalog No.: 1.1, chip conveyor, HEIDENHAIN TNC-640 control system (5 axes/simultaneous), 60-position tool changer SK40, table surface/simultaneously controllable rotary table: 630x500 mm, max. table load: 200 kg, travel ranges X/Y/Z: 650/520/475 mm, direct measuring systems for B- and C-axes, plane transformation, connection to central oil mist extraction system, external programming option via Mastercam, with 1 workpiece automation system from HALTER, type: LoadAssistant U-35, year of manufacture: 2019, serial number: DCH0284, item code: X92850, sales order no.: DS09801, with 3D robot Assistant Automation S180-20 handling robot from FASTEMS, subject to prior sale. Kedpfxsy T Nxpe Apdslu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,000 mm, Spraying machine Manufacturer: Leif Lorentz Model: B3 Suitable for water-based paints and products Working width: 1000 mm Pass-through height: approx. 110 mm Equipped with: 1x Dete MX 32 high-pressure piston pump Max. air inlet pressure: 0.8 MPa (8 bar) Pressure ratio: 32:1 Ksdjxmrdxopfx Apdjlu Max. operating pressure: 25.6 MPa (256 bar) Max. delivery rate (free flow): 11 l/min 5x automatic airless spray guns Feed rate adjustable, workpiece transport via conveyor belt (belts replaced!) With integrated paint recovery: paint, stain or oil is collected and can be reused Integrated filtration system The machine is currently being cleaned and technically inspected. Sale will be in fully operational condition. Delivery time: approx. 3 weeks

Condition: used, In this offer you purchase a used fully automatic coffee machine "Selecta LaRhea Cino" Object of sale: 1 x Selecta LaRhea Cino with the following equipment: Please take the equipment from the pictures Drives up - not tested further Condition: This offer is for a used appliance, which may show signs of use (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Ksdpswln Elsfx Apdslu For further information you can of course also contact us personally.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine Ksdpfx Apjd N H A Nedelu - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column Kljdpfx Asupbf Depdsu - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable Klsdpfxodzp T Ns Apdeu - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) Kedpfodzqtgox Apdslu - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: Klodpfx Apov Hm A Todsu -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: excellent (used), Strapping machine SIVORON / GIGANT Model S 669 L integrated strap reel belt width 6/ 9/ 12/ 15.5 mm Electrical connection 230 V, 50 Hz Adjustable belt tension Temperature welding system idle rollers in the work table mobile with cord wheels Dimensions L x W x H = 1460 x 600 x 1600 Weight approx. 70 kg Ksdpfx Apouxm Hajdelu Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw Kodpfx Aey S Dwwepdolu - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, Year of construction: 2024, warranty duration: 12 months, Semi-automatic rolling machine Rondo SWL 640 Klodpey Ui D Usfx Apdeu - Year of manufacture: 2024 - Unused - Power supply: 400 V/3 phases - Belt length: 1,400 mm - Belt width: 640 mm - Machine body painted - 12-month warranty - Collection from warehouse/shipping option available - Price on request

Condition: good (used), HR 4 automatic polisher Klsdpfxsqmfv Ds Apdsu Manufacturer: Hau With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: good (used), Used rotary indexing table polishing machine Klsdpoqmfv Ssfx Apdeu Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: excellent (used), - Dimensions (LxWxH): 500x300x250 mm - Output: 4-6 kg - Serial Number: L17000531 Iiedjwyc Ukscu T Rxiei - Year: 2017 - Voltage: 400V - Power: 0.65 kW - Weight: 27 kg - Condition: New, never used The listing was translated automatically. Translation errors are possible. Kjdpfewyc Ukox Apdolu

Condition: good (used), Year: 2005 Equipment: Max. size 320 x 420 mm Min. size 75 x 150 mm Speed: Max. 10,800 cycles/hour Number of stitches: Standard 11 Power requirements: 6 kW (220/380V, 50Hz) Air requirement (6 bar): 200 m³/h Width: 2730 mm Depth: 1800 mm Weight: 3000 kg (approx.) Equipment: Fully automatic book sewing machine • Automatic feeder • 4 upper and 4 lower signature openers • Computer program Kedevp Rw Tspfx Apdolu • Thread cutting device Condition: Very clean, in excellent working condition. Machine was refurbished in 2024.

Condition: used, - Brand: GECOMA - Model: SMART 11 - Type: bread slicer - Version: semi-automatic - Serial No.: 13 SM 411 026 - Year: 03/2013 - Slice width: 42 cm - Slice thickness: 11 mm - Useful passage: 42 cm - Passage height: 15 cm - Cutting depth: 32 cm - Maximum output: 200 loaves/hour - Power supply: 400 V three-phase - Power: 0.55 kW Klsdpfx Apsy N Sp Aodsu - On stand/base - Operation: right or left hand - Bagging: ergonomic tray - Integrated crumb drawer Inclined loading table, allowing fully front-facing operation. • Assisted traction technology "Softlift". A transverse bar replaces the classic side lever: • Advantages: Reduced effort. Can be used with right or left hand, or two-handed operation. • Compact footprint, allowing perfect integration in a cabinet. • Balancing of mechanical stresses. • Bagging tray at ergonomic height. • Integrated crumb collection drawer. • Various base options available.