Used Shelf Veneer Press , Multi-Shelf Press for sale (18,931)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates Ksdpfxozuzw De Ab Hedr consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 141012/1, Equipment: CE marking, The machine is designed for efficient gluing and pressing of veneer edges, with continuous material feeding. It is suitable for carpentry and furniture production, where precise and stable edge processing is required. It features a robust construction, simple operation, and reliable performance. Kdodpfx Abozg Dt Sj Hjr

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Kdsdpfxjzuzxno Ab Her Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Press depth: Press elements vertical: 3 Press elements horizontal: 2 Kjdpfsy A Hkzex Ab Hedr Pressure system: electrohydraulic Press pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility. Ksdpfx Abjzlpans Hsdr

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Kdodpsfupadefx Ab Hsr Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, Year of construction: 2023, For sale is a professional, two-spindle multi-blade saw, model WP 165, designed for efficient longitudinal cutting of wood. This machine is ideal for sawmills and facilities producing packaging components, pallets, structural timber, boards, and garden elements. Thanks to the use of two parallel spindles with a set of circular saw blades, the machine provides high performance, precise cutting, and uniform blade wear. The adjustable spindle carriage allows for adjusting the spindle position, which ensures optimal tool load during operation. Material transport is carried out using four pairs of driven rollers, which ensure secure guidance of the timber. The clamping force is pneumatically adjustable, allowing for stable cutting of both dry, wet, and frozen wood. The machine's design guarantees straight cuts even when processing long materials. Depending on the type of wood, its moisture content, and the number of cuts, the output is approximately 10–18 m³ of wood per hour. TECHNICAL SPECIFICATIONS: - Model: WP 165 - Type: Two-spindle multi-blade saw - Maximum blade diameter: 300 mm - Maximum distance between outermost blades: 320 mm - Minimum cutting thickness: 30 mm - Maximum cutting height: 165 mm - Maximum timber width: 500 mm - Minimum material length: 700 mm - Spindle speed: 3350 rpm - Feed rate: 30 m/min - Main motor: 90 kW - Second spindle motor: 75 kW - Feed drive motor: 2.2 kW - Power supply: 3 × 400 V - Pneumatic system pressure: approx. 0.4 MPa (4 bar) - Sawdust extraction: lower – by conveyor or pneumatically, upper – pneumatically. - Year of manufacture: 2023 Machine dimensions: - Width: 1950 mm - Height: 1640 mm - Length (without tables): 1960 mm - Equipment: Kdjdpfx Aozkg Iyeb Hor two-spindle blade set, driven material feed, pneumatic material clamping, infeed table included. This machine is a robust construction designed for intensive operation in a sawmill. The high drive power (90 kW + 75 kW) allows for efficient cutting of thick timbers with high throughput. Please contact us by phone. Machine viewing is possible by prior arrangement. - Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship It is possible to test the machine on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT We also offer a wide selection of woodworking machines, including: panel saws, band saws, and circular saws, planers, jointers, milling machines, grinders, edge banding machines, four-sided planers, drills, presses, lathes, dust extractors, and many other devices from reputable manufacturers. Our range includes machines from brands such as: ALTENDORF, SCM, MARTIN, FELDER, HOLZ-HER, ROBLAND, WEINIG, CASADEI, BRANDT, MAGGI, SAC, STETON, HOUFEK, IMA, OTT, BÜTFERING, HEBROCK, BERNARDO, HOLZMANN, and many others.

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Kedpfx Ajztxn Rob Hsdr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Kdjdpfx Absipx Aij Hjr Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: excellent (used), Year of construction: 2019, HSM V Press 1160 plus Pressing force 532 kN, opening width 1,195 m, opening height 0.65 m, drive power 4 kW, press type BP, dead weight 2.43 t, transport length 1.78 m, transport width 1.568 m, transport height 2.995 m, press type baler. Press immediately ready for use. Ksdpfx Abol Uvuke Hedr

Condition: used, Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. The press has four independently controllable pressing surfaces. Includes dismantling and loading. Fixed loading date: 15 June 2026. Glue applicator also available. Kodpezryzcefx Ab Hedr Technical data: - Working length: 3,090 mm - Pressure: max. 104 t

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Kdedpfx Abozktg Aj Her Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Kedpfxoy A Hkhs Ab Hodr Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Kdodpfxjzd Shre Ab Hsr

Condition: excellent (used), Year of construction: 2000, STETON P85 C 2500 Platen Press Kdsdpfx Aezcu E Sob Hsr For sale: a high-quality Italian platen press, the STETON P85 C, designed for gluing wood components, veneers, and boards, as well as for the production of countertops and furniture panels. Its robust construction and hydraulic clamping system guarantee uniform pressure across the entire working surface, ensuring high quality of the finished products. Technical specifications: * Model: STETON P85 C * Working dimensions of the platens: 2500 x 1300 mm * Clamping force: 85 tons * Number of hydraulic cylinders: 6 * Cylinder diameter: 85 mm * Maximum opening: approx. 420–450 mm * Power supply: 380 V * High-performance hydraulic design * Sturdy steel frame ensuring stable operation Applications: * Gluing solid wood * Production of glued panels * Gluing veneers * Production of furniture components * Woodworking and furniture industries This machine is valued for its durability, reliability, and ease of operation. It is ideal for woodworking shops and furniture manufacturers looking for an efficient press for daily use.

Condition: used, Year of construction: 1964, machine/vehicle number: 63/10.2995-96, pressing force: 1,200 t, total length: 5,300 mm, total width: 2,690 mm, total height: 9,300 mm, overall weight: 3,60,000 kg, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 500 mm Stroke rate: approx. 10 – 16 strokes/min Shut height: approx. 1,250 mm Drawing equipment: Drawing cushion force: approx. 240 t Drawing cushion stroke: approx. 250 mm Pneumatic ejector in ram: Force: approx. 95 t Stroke: approx. 150 mm Table size: approx. 3,500 x 1,900 mm Heavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application. The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling. A key feature is the movable / sliding press table, which significantly simplifies setup and tool change and makes the machine ideal for handling heavy tools. The integrated drawing equipment (drawing cushion) provides approx. 240 t of force with a stroke of 250 mm, enabling demanding forming and deep drawing operations. In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Pressing force max.: 1,200 t Dimensions (LxWxH) approx.: 5300 x 2690 x 9300 mm Installation height max.: 1,250 mm Weight approx.: 360,000 kg Kdsdpfx Abey S Nhzj Hsr Machine table clamping surface: 3500 x 1900 mm Passage between the uprights: 3,600 mm Serial number: 63/10.2995-96 Year of construction: 1,964 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Kdedpfjzuzptex Ab Her Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: good (used), Screw bookbinding press 40×30 with base Kdodpfx Aezt H Uxeb Her The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives Kdjdpfx Aozlaimsb Her 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Kjdpfx Ajzb Il Nsb Hodr Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 2025, New exhibition machine! List price €17,380 net. MOVE – the highly precise vacuum press with an enormous working area for vacuum forming and vacuum veneering of curved workpieces. Featuring comprehensive flexibility due to its absolute mobility and revolutionary folding mechanism, which reduces the base area to 45% when folded. High-precision vacuum press with flap opening, including: revolutionary folding mechanism (reduces the base area to 45%) 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER optional, automatic shutdown when pressure is reached (for large vacuum volume) Pressure regulation from 400 to 900 mbar, analog vacuum pressure display highly elastic natural rubber membrane (up to +130 °C) Membrane quick-change system stable phenolic resin worktop (up to +120 °C), 15-layer glued gas pressure dampers for flap opening vacuum pressure display connection for an external vacuum bag easy-rolling swivel casters FESTO pneumatics and SIEMENS electrical engineering Technical data and dimensions: Working area: approx. 3050 x 1350 mm Internal frame dimensions: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1780 mm Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 kg Storage location: Rieth Kdjdpfx Ajyi Hd Heb Hor

Year of construction: 2012, condition: excellent (used), functionality: fully functional, controller model: Simatic Mobile Panel 277 10", number of cylinders: 4, lifting height: 1,500 mm, pressing force: 250 t, operating pressure: 245 bar, main lifting speed: 290 mm/min, pressing speed: 400 mm/s, control type: PLC-controlled, Equipment: 3rd hydraulic function, hydraulics, Here you have the unique opportunity to acquire a thermoforming press from the premium manufacturer FRIMO. The press is in used, very good condition, has no outstanding maintenance requirements, and is available immediately. The press can also be modified and adapted to meet new requirements according to customer specifications. Please feel free to contact us regarding your planned project, and we will prepare a customized offer for you. The press is currently located in Sontra (Germany) and can be inspected by arrangement. The press is currently partially disassembled (platform, hydraulics, attachments, etc.) and can be completely reassembled if required. Kdjdpfxsztm Ufs Ab Hsr The press was last used in a multi-stage production line; the other equipment is also largely still available. The image (overview) shows everything schematically; this advertisement primarily concerns the 250t thermoforming press. If we have piqued your interest, please do not hesitate to contact us at any time.

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS Kodpfju Nfq Eex Ab Hodr TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: ready for operation (used), Year of construction: 2020, number of ink cartridges: 4, color channels: 4, number of print heads: 4, counter reading (black): 3,09,030, counter reading (color): 5,06,975, Equipment: auto duplex, brochure finisher, documentation/manual, raster image processor, An authorized Canon Production partner is offering a Canon imagePress C910 (90ppm) cut-sheet digital press for sale. The printer is in excellent condition; it was originally used as a showroom device and later, in 2023, installed at a small graphic arts customer. It has now been returned to us following the completion of a contract. Configuration: - CANON ImagePress C910 main unit (90ppm license) - Multi-drawer Paper Deck-E1 - Staple Finisher W1 Pro - Paper Folding Unit-J1 (performs C/Z folds) - PRISMAsync iPR V910 print server - Stack Bypass-D1 - Stack Bypass Alignment Tray-D1 - Duplex Color Image Reader Unit-M2 Counters: Total (All) 1,002,240 Total (Black/Large) 3,879 Total (Black/Small) 309,030 Total (Full Color+ Single Color/Large) 182,356 Total (Full Color+ Single Color/Small) 506,975 Total (Black & White / Long Sheet) 0 Total (Full Color + Single Color/Long sheet) 2 Kodpfozrg Rdex Ab Hodr We would be happy to provide more details, including photos and videos of the device, via WhatsApp. You are welcome to inspect the printer at our facility and perform test prints. The printer is located in Riga, Latvia. We will pack it securely for worldwide shipping.

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider". Kdsdpoy Hl Hpofx Ab Hsr