Used Single Use Support (Sus) Ultragefrierschrank Ross.frdg. for sale (54,254)

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Gkodpfjzqz Rijx Apwja

Condition: good (used), Cantilever shelving, single-sided, 60cm arms, with chipboard panels, SSI Schäfer – used: Price ex works: only €850 (net), disassembled, packaged, and loaded Manufacturer: SSI-Schäfer Type: Cantilever Year of manufacture: unknown Frame height: approx. 2m Number of frames: 4 pieces (2 base units) Axle distance: measurement was forgotten, should be approx. 1m plus a cross brace as a connector Arms installed Incl. anti-roll safety device 5 arms per frame Godpfszqzraox Apwska Frame load capacity: 1,650kg Support profile: U 120 Cantilever load capacity: 250kg Cantilever length: 600mm Profile: U 70/50/4 incl. 28mm chipboard panels Condition: good Available: immediately Location: Leipzig

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. Gkedpfoyyap Eox Apwja 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 Connect machining center - used - Year of manufacture: 2022 Integrated vacuum pump Continuous processing 4-sided edge profiling possible Automatic vacuum cup positioning Hardened, dust-protected prism guides Ball screw spindles on all axes Network card for remote maintenance Integrated control cabinet Control cabinet cooling with heat exchanger Handheld control unit Pick-up tool changer Changer for angle head Central lubrication, automatic Sensor for panel measurement Barcode scanner CLAMEX tools Angle gear for CLAMEX Additional infeed table ----- Technical data ----- Machining length (edge profiling - radius) X: 3,200 mm Machining length (edge profiling - radius) Y: 985 mm Min. workpiece length X: 200 mm Min. workpiece length Y: 70 mm Min. workpiece thickness: 8 mm Max. workpiece length X: 3,200 mm (longer with extension) Max. workpiece length Y: 1,200 mm (max. passage width) Max. workpiece thickness: 70 mm Main spindle motor power: 10.3 kW (S6) Main spindle speed: 1,000 - 24,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drilling spindle mount: M10, interference fit 11 mm Number of vertical drilling spindles: 13 pcs Number of horizontal double drilling spindles in X-direction: 2 pcs Number of horizontal double drilling spindles in Y-direction: 1 pc Saw blade Ø of saw unit: x 20 x 5 mm Number of tools in the changer: 6 + 1 pcs Dust extraction port Ø: mm Compressed air connection: 6-8 bar Compressed air requirement: 200 NL/min Gsdpfx Apozr Inqoweka Quality information: - Complete basic cleaning - Electrical system checked - Pneumatics checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Gksdozr D Tcspfx Apwja Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW Gedjznbhispfx Apwjka GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, the 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically demonstrates the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40100 Main motor power: 45 kW Hydraulic system motor power: 2.2 kW Working rotor length: 1000 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 58 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Godpfx Apoq Sp Ibowoka Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Gkedpfx Apoq Sp H Nswsa Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically showcases the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Gsdpfx Apsq Sp H Tjweka Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically showcases the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools Gedpfx Apjvb Dcmjweka - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: Gkodpfx Apjx Dkyyjwja - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Godpfx Apsu Hldmoweka Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,885 h, load capacity: 2,000 kg, lifting height: 3,300 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, remaining battery capacity: 82 %, battery voltage: 48 V, DGUV certified until: 08/2027, fork length: 1,200 mm, tire condition: 100 %, total height: 2,180 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 20-20 P electric forklift with the following specifications: * Lifting capacity: 2,000 kg Gsdpfx Aozivg Nopweka * Lifting height: 3,300 mm * Overall height: 2,180 mm * Year of manufacture: 2017 * Operating hours: 2,885 STILL 2.0-ton electric forklift, very good battery, new non-marking tires (not yet mounted in the photos), duplex mast, side shifter, lighting, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by prior telephone appointment. Sale is exclusively to commercial enterprises; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our newly designed website!

Condition: good (used), Manufacturer: DIGÉP Tip: SD 100 Gksdpsm Uc R Asfx Apwja

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 19800 € 1 40 to 2.6 mm Gedpfx Apeyrhpvswjka 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Gkjdpfsyvilzjx Apwja

Condition: used, Year of construction: 2003, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Gkedpfjzcf Idox Apwsa

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module Version: B SN:T-FO6013590, used, in good condition, 100% functional, delivery scope as shown in the photos. Gksdpfx Apjx Euz Hswsa

Condition: used, Year of construction: 2018, machine/vehicle number: LC592, Used complete CSD canning line 2018 - 24.000 bphTechnical Specifications & Performance DataThis complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations.Production Speed: 24,000 bphContainer Type: Aluminum cansAvailable Volume Range: 0.33LProduct: CSD (carbonated soft drinks)Build Year: 2018 (major equipment)Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP SystemManufacturer: ZhongChenAdvanced Automation & Control SystemsThe line is arranged for synchronized operation across the primary processing and packaging stages. A centralized control approach ensures coordinated start/stop, accumulation management, and fault handling, providing stable throughput at rated speed. Operator interfaces are designed for straightforward format adjustments and routine production tasks. Safety interlocks and guarding support secure operation while enabling efficient maintenance access.Production Line Integration CapabilitiesThis production line is configured for inline operation, from primary product mixing through filling, seaming, rinsing, and secondary packaging. Conveyor systems provide smooth transfers and buffering between machines to maintain optimal flow. The 0.33L can format is supported across the entire line, with provision for standard format changeover procedures. The layout is compatible with typical upstream syrup preparation and downstream palletizing solutions to form a complete beverage production and industrial packaging system.Machine Condition & Maintenance HistoryThe line is reported as still on line, indicating it remains installed and in use at the time of documentation. The 2018 build year across key machines suggests modern engineering and contemporary safety design. Routine maintenance and serviceability are facilitated by straightforward access points and standard components common to ZhongChen packaging machinery. Operating hours are not specified.Operational Performance & VersatilityOptimized for CSD processing, this used bottling line supports consistent carbonation retention and gentle product handling through filling and seaming. The can rinser and warmer modules help ensure product quality and downstream pack integrity, while the shrink wrapper forms stable packs ready for palletizing. Quality control is supported by stable handling and synchronized transfers to minimize scuffing and deformation, contributing to dependable second hand beverage production results.Installation Requirements & Site PreparationThe line is arranged as a modular set of machines connected by conveyors, allowing flexible placement within a suitable production hall. Standard utilities expected for beverage lines apply, including electrical power, compressed air,... Gsdpfx Aeydc Ttepweka

Condition: used, Year of construction: 2021, machine/vehicle number: ET235, Used Sleever labelling machine 4000 BPHTechnical Specifications & Performance DataThe ULISSE 4000 is an automatic sleeving labeling machine engineered by Scaligera for high-quality application of shrink sleeves on cylindrical containers. Built in 2021, this second hand equipment is designed for integration in a used bottling line and industrial packaging environments for beverage production. Its robust AISI 304 stainless steel construction, Omron automation, and precision cutting system ensure repeatable, accurate sleeve placement prior to steam shrink.Manufacturer: ScaligeraModel: ULISSE 4000Year: 2021Formats: 330ml standard, 440ml standard, 500ml standard (CAN)Machine type: Automatic sleeve applicator (Labeling Machine)Installed electrical power (applicator): 3 kWCompressed air consumption (applicator): 80 Nl/minControl system: PLC Omron with 7-inch color touchscreen HMICutting system: 1 rotating-blade cutting head, register-controlledMaterials: AISI 304 stainless steel frame and guards; anodized aluminum and chromed steel componentsIncluded conveyor: Scaligera K325, approx. 7.5 m total length, chain 82.5 mm, inverter-drivenShrink tunnel (included): Scaligera TVP3SE steam tunnel, 3 independent steam sections, 6 injection cells, electronic temperature control, inverter-driven exhaust, installed electrical power: 11 kW, minimum steam pressure: 5 barRotary accumulation table (included): Ø 1200 mm, power: 0.5 kWElectric steam boiler (included): COMETH GEI 54 KW 75, 3 × 25 kW resistors, 380 V 50 Hz, steam output approx. 100 kg/h, stainless steel water tank approx. 80 L, capacity approx. 60 LSafety: CE-compliant interlocked guards and protectionsAdvanced Automation & Control SystemsThe ULISSE 4000 integrates advanced automation to optimize sleeve application accuracy and uptime. The external unwind with mechanical dancer ensures stable film tension. Motorized traction rollers launch the sleeve at high speed, with automatic opening and adjustment. Film length is photoelectrically controlled and synchronized to product presence for precise register cutting. Operators interact through a 7-inch color touchscreen HMI with Omron PLC control, enabling recipe management and quick parameter adjustments.Automatic sleeve advance and register-controlled cuttingMotorized rollers with automatic opening and regulationPhotocells for film length regulation, infeed product absence, and outfeed jam detectionMicrometric adjustment handwheels with counters for repeatable settingsInterlocked safety doors and CE-compliant protectionsProduction Line Integration CapabilitiesThis sleeving machine is supplied with a matched steam shrink solution and conveying to facilitate rapid integration in a used bottling line or standalone industrial packaging cell. T... Gkjdoy Ef Tmepfx Apwja

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPH Technical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation. Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025 Manufacturer: SIG Model: HMR - 7478 Rated Speed: 26,500 BPH Fill Volumes: 65 ml, 125 ml, 200 ml Sterilization: H2O2 system (SIG COMBI 2024) System Compatibility: SIG-2 Combibloc 1224 filler platform Upgrades: Filler speed-up conversion kit (SIG-2 2025) Formats: Compatible with 0.065L, 0.125L, 0.2L package sizes Advanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production. Gkjdjzdipujpfx Apwoa Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts. Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents...

Condition: used, 3700mm long, 960mm high, and adjustable Gkodpfxev Dauqs Apwea Storage location: Nattheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Gkodpfx Ajymcrbjpwsa

Condition: used, Year of construction: 2018, HSM V-Press 605 Waste Paper Baler — Used The HSM baler is a compact machine that can reduce packaging waste by up to 95%. It is designed for compressing and baling cardboard (paper bags, waste paper, trimmings) and plastic film (stretch film, plastic bags). It enables cost-effective disposal of these materials. The waste paper baler features a graphical text display showing the machine’s operating status and a large opening for loading waste. All of this contributes to the baler’s ease of use and intuitive operation. Advantages of the HSM V-Press 605 baler: • Compact size – saves space. • Compression force of 57 kN (approximately 6 metric tons)—allows for the formation of bales weighing up to 70 kg with dimensions of 80 x 60 x 60 cm. • Low noise level—60.1 dB(A) • Material-supporting claws – increase the loading capacity, thereby boosting baling efficiency. • Mechanical ejector – facilitates bale removal. • Large waste loading opening – enhances ease of use. • Quick and easy installation. This offer applies to the HSM V-Press 605 waste paper baler: • Manufacturer: HSM • Product condition: used • Year of manufacture: 2018 Godpszrl I Iofx Apwjka • Model: V-Press 605 • Width: 119 cm • Depth: 81.5 cm • Height: 198 cm • Weight: 485 kg • Power: 1,500 W • Voltage: 400 V Net price: 3,579.00 euros per unit * I have large quantities available; price negotiable for larger orders. * Shipping available throughout Europe. * The above offer does not include shipping costs. * Location: Chmielów/Tarnobrzeg

Condition: used, Year of construction: 2015, 1 unit of overhead traveling crane / single-girder suspended crane ABUS, 1000 kg capacity with electric chain hoist ABUS GM 4 1000.4-2, 6 supports, self-disassembly feature Color: as shown in the pictures, in accordance with the images and inspection Year of manufacture: 2015 Gksdpfezqbvxex Apwea Dimensions L/W/H: 1700x400x260cm Condition: used