Used Sirona Ineos X5 for sale (927)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Screw Compressor GX5FF EP Main Technical Data (10 bar version): Motor Power: 5.5 kW (7.5 HP) Operating Pressure (max.): 10 bar (e) / 145 psi Free Air Delivery (FAD):* approx. 10.0 l/s to 10.1 l/s Sound Pressure Level: approx. 64-66 dB(A) (very quiet due to soundproof enclosure) Cooling System: Air-cooled Duty Cycle: 100% (suitable for continuous operation) Features & Dimensions (Full Feature - FF): Integrated Refrigerant Dryer: Yes (R134a) Tank Size: Mostly mounted on 200L or 500L tank (typical in 2015) Dimensions (approx.): 1430 mm x 665 mm x 1260 mm (tank-mounted) Weight: approx. 198 kg - 310 kg (depending on tank size) Connection: 1/2" G Dedpfx Asy H D R Hoa Njut

Condition: good (used), Technical data for pallet rack frame: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 01x pallet rack frame, used Material color: Sendzimir galvanized Frame type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Including horizontal and diagonal braces, frame protectors and base plates The frames are pre-assembled (bolted lattice construction) Height: 7,000 mm Dedpfx Asyz Tczea Neut Depth: 500 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transport or shipping beyond self-collection is subject to additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, lifting height: 18,500 mm, Year of construction: 2016, Drivetrain Duodpfx Aoxivwnea Not Drive: Wheel Weights Empty weight: 3.600 kg Functional Lifting capacity: 2.700 kg Identification Serial number: AMC2213 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 4.15x1.1x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,789 h, load capacity: 4,000 kg, lifting height: 5,200 mm, free lift: 1,550 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,450 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,500 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 21X9X15, rear tire type: superelastic tires (black), rear tire size: 355/50-15, overall weight: 12,650 kg, empty load weight: 8,650 kg, total height: 2,356 mm, total length: 1,840 mm, total width: 1,624 mm, color: yellow, Equipment: CE marking, all wheel drive, front guard, lighting, pallet forks, sideshift, COMBILIFT CB4000 – LPG / TRIPLEX 5200 mm / FORK POSITIONER / SIDE SHIFT – EXCELLENT CONDITION 🔧 Used forklifts with certified quality – FT LOGISTICS ✅ The Combilift CB4000 is a premium four-way multidirectional forklift, fully serviced and ready for immediate work. Perfect for handling long or bulky loads in narrow aisles, both indoors and outdoors. Specifications: • Year: 2019 | Hours: 2,789 | Power: LPG / Gas ⛽ • Capacity: 4,000 kg | Mast: Triplex 5,200 mm | Free Lift: 1,550 mm • Fork Positioner: 1,500 mm | Forks: 1,200 mm | Side Shift: ✔️ • Tyres: Superelastic 100% 🛞 • Technical condition: Excellent – after full service • Visual condition: Refurbished, corrosion-free, ready to work • Height: 2,350 mm | Length: 1,840 mm | Width: 1,624 mm Why choose FT LOGISTICS 💪 ✅ Over 10 years of experience in forklift sales and service ✅ Full technical inspection and professional refurbishment ✅ Own paint shop, service, and European transport 🚛 ✅ Operator training & functional test on delivery ✅ Financing available | Invoice in EUR or PLN ✅ After-sales support – we’re here after the purchase Ideal for 🏭 Warehouses, timber, steel & pipe industries, long-load handling, indoor/outdoor use. Dusdpfoy Axc Nex Aa Not Quality guaranteed 💯 Every forklift is fully inspected and tested before delivery. Reliable machines – ready for work anywhere in Europe. 📞 Contact us today for a viewing or quote. Delivery available across Europe.

Condition: good (used), Year of construction: 2016, lifting height: 10 mm, fuel type: gas, Empty weight: 7.370 kg Lifting capacity: 3.740 kg Maximum passing height: 0,226 cm CE mark: yes Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 4,27x1,4 Production country: UK Please contact Christian Theißen for more information Manufacturer: Yale Model: GLP45SVX5 E2914 Year of build: 2016 Condition: Used Data: Max. lifting height: 6,00 m Max. Lifting capacity: 3.740 kg Dusdpeyz Radjfx Aa Njt Length forks: 1,80 m Drive type: Gas Dimensions LxW (without forks): 4,27 x 1,40 m Stowed height: 2,26 m Empty weight: 7.370 kg Special features: white tires. Side shift, street lighting, trailer operation possible.

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage Duedpsyml D Hefx Aa Net - Durable, low-maintenance design - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!

Condition: used, We are offering used crossbeams for sale. TECHNICAL DATA Clear span: 3,600 mm Box section: 125 x 50 mm – Load capacity per pair of beams: 3,700 kg Box section: 130 x 50 mm – Load capacity per pair of beams: 3,800 kg Colour: Narcissus yellow Condition: Used PRICING €25.00 net per unit €29.75 gross per unit TIERED PRICING per unit – Stock: 2,000 units 1 – 50 units: €25.00 net 51 – 100 units: €24.00 net 101 – 250 units: €23.00 net From 251 units: €22.00 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailor-made quotation. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. Prices are per unit/net price unless otherwise specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US Djdsy H D Ekjpfx Aa Nout DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and craft businesses. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us if you have any questions. Four wins – The building blocks of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: used, We are offering used cross beams for sale. TECHNICAL SPECIFICATIONS Clear span: 2,700 mm Box profile: 110 x 50 mm Colour: Daffodil yellow Load capacity per beam pair: 2,650 kg Condition: used PRICING €19.00 net per piece €22.61 gross per piece TIERED PRICING per piece – Stock: 200 pieces 1 - 30 pieces: €19.00 net 31 - 60 pieces: €18.24 net 61 - 120 pieces: €17.48 net from 121 pieces: €16.72 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding and customised offer to suit your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Djdsy H D Dmopfx Aa Njut Payment terms are to be agreed upon in the event of an order. The price is quoted per piece/net price as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machines for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers and brands at attractive terms. If you have questions, please do not hesitate to contact us. Connect Four – The four success factors from DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used cross beams for sale. TECHNICAL DATA Clear span: 2,700 mm Dusdsy H D Dgjpfx Aa Net Box profile: 120 x 50 mm Colour: Narcissus yellow Load capacity per pair of beams: 2,900 kg Condition: used PRICING €20.00 net per piece €23.80 gross per piece TIERED PRICING per unit – Stock: 350 units 1 – 20 units: €20.00 net 21 – 60 units: €19.20 net 61 – 120 units: €18.40 net from 121 units: €17.60 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transportation and assembly of the goods. TERMS OF PAYMENT Payment terms are to be agreed upon in case of an order. The indicated price refers to a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 Dedpfexni Iqex Aa Njut 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), machine/vehicle number: 3042, Year of construction: 2005, SMV SC4537 CBX5 from Uniktruck Duedpfx Ajyuh Hgea Njt Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Dedpfx Aoy Ni Ivsa Njut Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, machine/vehicle number: SB205+206, Demag / Erikkila crane sky runway approx. 13x7.6m Dedpfxsrwi Dzo Aa Nout Load capacity / lifting capacity: 2x 500 kg - 2x 0.5 tons Technical specifications of the system: Crane runway made of 200mm Erikkila rails Runway length 13m, 2x bridge girders each 7.6m System is delivered complete: Rails, rail connectors, end trucks, end plates, cable carrier, brackets/hangers etc. Incl. 2x Demag 500kg PK chain hoist, lifting height approx. 3.5m Crane is dismantled and available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or pickup only by appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Load capacity 125kg - 1600kg Please inquire about your required crane runway with load capacity and dimensions without obligation.

Condition: new, power: 397 kW (539.77 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, loading space length: 49,000 mm, loading space width: 24,200 mm, loading space height: 9,000 mm, Equipment: ABS, EBS, air conditioning, - Brake system Dodpeyfqhnsfx Aa Neut For vehicle enquiries, Mr. Seidel is your contact (by phone). Iveco X-Way AT300X54Z HR OFF 6x4 Three-way tipper CA Axle configuration: 6x4, 3 axles, 2 driven axles. CT Cab AT MY, DR Steering: SX Left-hand drive, EM Emission Level: Europe, EP Engine: 540 C13 Cursor 13, 540 HP, GT Gearbox: TX-12M 12-speed HiTroniX, automated, MT Permissible total weight: 26–30 t, RT Drive axle variant HR-TM: Tandem Medium with outboard planetary drive, SU Suspension: MEC Mechanical suspension, TF Brakes: DIS-DIS Disc/Disc, US Application: MIXED For road and light off-road use, VE Vehicle variant: CABINAT Standard chassis with cab, VS Vehicle Set-up: OFF, WB Wheelbase: 3,500 mm, 06366 Rear engine PTO for pump connection, 78507 Rocking mode (free rocking function), 00869 Mirror cams Cover for AS FHS in vehicle colour / black for AT, 00640 Roof hatch, mechanical version, 77174 Tyre inflation hose 18 m with pressure gauge, 02758 Electric cab tilting mechanism, 00553 Headlamp protection grille, 00632 Transparent sun visor, mounted externally on cab roof, 02474 Preparation for rotating beacons, 79468 Flat roof painted in cab colour, 72536 Additional diesel/water heater, 4 KW, 02443 Leather steering wheel, 72251 Curtains for bed, 78563 Air horn behind bumper (compressed air), 04087 Lower bunk raised with safety net, continuous mattress, for AT/AS: three-piece mattress, 06636 Luxury co-driver seat, 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, 06695 On-board refrigerator, 08354 Ashtray in centre console, 72158 Axle load variant: front axle 9,000 kg / 1st rear axle 10,500 kg (technically possible: 11,500 kg), 2nd rear axle 10,500 kg (technically possible: 11,500 kg), 06403 Tipper version, 00180 Exhaust pipe extended upwards behind the cab, 14531 Reinforced front axle stabiliser, 02576 Batteries: 225 Ah, 72260 Stiffened parabolic leaf spring (60 mm), 05365 Without jack, 00191 Radiator protection below bumper for heavy off-road use, 78713 Battery charging socket, terminals, 04861 Rear frame overhang, 730 mm, 07806 Trailer coupling, brand: Ringfeder, 07228 Fuel tank, 390 litres, aluminium, 06157 Trailer coupling, 50 mm, 200 kN, 05883 AdBlue tank: 60 litres, 06032 Rear axle ratio: 3.79, 06151 Rear crossmember, D-value: 200 kN, 00876 Infotainment: 10" TFT display + integrated Driver Pal, 04572 Extension module for PTO management, 01340 Available auxiliary switch slots for body builder, 77985 Engine idle cut-off, 14522 Adaptive cruise control (ACC), 78878 GPS cruise control Hi-Cruise, 02548 Side marker lights, 78484 Emergency brake assist (AEBS), 75181 Reverse warning sounder, deactivatable, 00915 Electric parking brake, 00237 Retarder/intarder for ZF transmission or Allison automatic transmission, 07888 Electronic Stability Program (ESP), 02672 Inspection step, left, 52014 Leaf green RAL 6002, 30804 Printed materials (manuals), 30184 Tyre manufacturer: GOODYEAR, 20867 Tyres: 385/65 R22.5, 315/80 R22.5, 28579 KMAX S GEN-2 (3PMSF), KMAX D GEN-2 (3PMSF), 72920 Operating and maintenance manual, electronic, 02659 Fully automatic air conditioning, 02759 Air suspension for cab, 05629 Roller sun blind for side window, driver and co-driver side, 02916 HI-Comfort driver's seat, ...

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-5070, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table width: 660 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Hurco VMX50 vertical machining center, year of manufacture 2006. Manufacturer: Hurco Model: VMX50 Year: 2006 CNC milling machine Hurco VMX 50 | YOM 2006 | SK40 | Chip conveyor | Spare parts For sale is a CNC machining center Hurco VMX 50 (year of manufacture 2006). The machine is well-maintained, in good condition, and immediately available—ideal for workshops, subcontractors, or training facilities. Technical Data Manufacturer: Hurco Model: VMX 50 Year: 2006 Control: Hurco Ultimax Travel (X/Y/Z): 1,270 / 660 / 610 mm Table size: 1,500 × 660 mm Table load: approx. 1,300 kg Spindle: SK40, up to 10,000 rpm (depending on version) Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Dodpfx Ajy Exu Rea Njut Tool changer: 20 stations Coolant through spindle (IKZ) available Coolant system: yes Chip conveyor: yes Scope of delivery / Special features Including various spare parts LAN-enabled due to WR Box Chip conveyor included with the machine Inspection under power possible Collection only – loading can be arranged Price net plus VAT Location: 93073 Neutraubling Mobile: +49 160 97215567 If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, table load: 1,350 kg, spindle speed (max.): 12,000 rpm, Tool changer: 24 positions IKZ (internal coolant supply): 40 bar Probe: Renishaw Tool measurement: Renishaw Dedpoyx E Nnefx Aa Nsut Footprint (W x D x H) (Doors closed / without control / chip conveyor): 3250 x 2220 x 2950 mm Transport weight: 8,900 kg

Condition: good (used), axle configuration: 3 axles, first registration: 05/2011, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 2,150 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 7,340 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body build year: 2011, Side wall material: Aluminium, Number of sides: 1 side, Axle type: MERCEDES-BENZ, 55M3 ALU, COIL = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Duodpjw S Dfmofx Aa Net Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 14 mm; Tyre tread right: 9 mm Axle 3: Tyre tread left: 10 mm; Tyre tread right: 7 mm Weights Empty weight: 7,340 kg Payload: 31,660 kg Gross vehicle weight (GVW): 39,000 kg Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Quite simply! • Large, rapidly changing stock • Recognizable quality • Competitive pricing • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of recognizable quality • And much more… Please visit our website for special offers and the complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: used, mileage: 6,35,997 km, power: 375 kW (509.86 HP), first registration: 10/2020, fuel type: diesel, tire size: 385/55 R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, spoiler, = Additional Options and Accessories = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Engine brake - Power take-off (PTO) - Headlights - Stability control - Standard air conditioning - Sun visor - Alternating current - Toolbox - Xenon lights = Further Information = Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Steered; Tire tread left: 8 mm; Tire tread right: 9 mm; Suspension: Leaf suspension Rear axle: Tire size: 315/70 R22.5; Twin tires; Inner left tire tread: 5 mm; Outer left tire tread: 5 mm; Inner right tire tread: 5 mm; Outer right tire tread: 3 mm; Suspension: Air suspension Duodjy Imvbopfx Aa Njt Unladen weight: 7,911 kg Damages: none

Condition: used, mileage: 8,74,757 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: retarder, = Additional options and accessories = - Hydraulic tipper kit = Further information = Front axle: Steered Djdpfxoy Imats Aa Neut Rear axle: Dual tires Unladen weight: 7,968 kg Payload: 11,032 kg Gross vehicle weight: 19,000 kg Damages: none

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Dujdpfx Ajyaywhoa Nst Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 5AX-500 5-Axis Simultaneous Machining Center – Immediately Available The LAGUN L 5AX 500 machining center stands for high precision, robust construction, and cost-effective manufacturing. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Financing / leasing options available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers impress with reliability, easy maintenance, and low operating costs. Technical specifications: Control system: HEIDENHAIN TNC 7 CNC control + 16" TFT screen HEIDENHAIN motors, linear scales, and electronic handwheel HR 510 Dusdpfjfdxhaox Aa Nst Chip disposal: Chip conveyor Enclosure: Full enclosure with side-opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailor-made quotation.

Condition: good (used), Year of construction: 2016, operating hours: 367 h, load capacity: 1,000 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, empty load weight: 2,600 kg, mileage: 367 km, Triplex electric forklift from the German brand Still, year 2013; ONLY 367 hours on the clock; Capacity of 1,000 kg; Lifts up to a height of 4,620 mm; Clearance height 2,060 mm; Equipped with FREELIFT and SIDESHIFT; Fork length 1,200 mm; Battery comes with external charger; Watch the video on YouTube. Dedexyzbaopfx Aa Neut

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: C1210000251, Yxlon Multiplex 5500 M – Industrial X-Ray & CT Inspection System The Yxlon Multiplex 5500 M is a powerful, fully digital X-ray inspection system for non-destructive material testing (NDT/NDE). It is ideally suited for applications in the automotive, aerospace, electronics manufacturing industries, as well as for cast and structural components. The system offers precise 2D radioscopy and can optionally be upgraded to a fully-featured 3D computed tomography (CT) system. Main Features • Fully digital X-ray system with HDR radioscopy and CT option • Automatic Defect Recognition (ADR) integrable • Ideal for steel, aluminum, ceramics, and plastics • High resolution via CCD camera + image intensifier • Intuitive operation via central control console • High throughput for serial inspections Technical Data (Y.Multiplex 5500 M) Inspection Chamber & Capacity • Maximum part size: Ø 600 mm, 900 mm height • Maximum part weight: 60 kg • Typical throughput: 30 s for 6 positions System Data • Cabin height: approx. 2650 mm • Cabin width: approx. 2650 mm • Cabin depth: approx. 1900 mm • Total cabin weight: approx. 6500 kg • Operator console: approx. 250 kg Electrical & Power Dsdpfxjyg Iqvj Aa Njut • Power supply: 3 × 230/400 V, 50 Hz • Power consumption: approx. 4.5 kVA • Main fuse: 40 A slow-blow Detector Technology • Active area: 204.8 × 204.8 mm • Pixel matrix: 1000 × 1000 active • Pixel size: 200 µm • Energy: 40 – 225 kV Manipulation & Axes • Multiple automatic/manual axes (4–7 depending on model) • U-arm manipulator for flexible positioning Condition & Applications Thanks to its modular design, reliable Siemens drives, and high-quality X-ray technology, the Yxlon Multiplex 5500 M provides a durable, precise, and efficient inspection platform. Ideally suited for: • Serial inspection & inline quality control • CT analysis of internal structures • Analysis of casting and porosity • Electronics and solder joint inspection • Aerospace and automotive components Scope of Supply • Complete Yxlon Multiplex 5500 M X-ray system • Operator console • X-ray detector incl. image intensifier • Siemens drive & control technology • Original operating manual

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Djdpfxey D A Nie Aa Njut

Condition: used, mileage: 2,17,500 km, power: 120 kW (163.15 HP), first registration: 07/2021, fuel type: diesel, overall weight: 3,500 kg, color: brown, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Renault Master 165 HP Euro STX 5-seater 1-2 Horse Transporter ///Vehicle shows signs of use/// ///Sale only to businesses or for export/// Vehicle Features: * 170 HP Renault Master Chassis, EURO 6 emission standard * Leather interior * Air conditioning * 5 seats * Radio-CD navigation system * Bluetooth hands-free system * Tow bar * Cruise control * Multifunction steering wheel * Sulky holder Horse compartment: * Soft rubber flooring * FULL STALLION EQUIPMENT with high partition wall, separate doors in front of each horse * Completely adjustable partition, e.g. for mare & foal * Roof fan * Roof hatch * LED day-night lighting * Closed storage boxes in the alcove * Saddle and bridle holders * Tack room with storage compartments * Camera system: reversing and horse monitoring cameras Errors, input mistakes & intermediate sale reserved. More photos available on request. * EXPORT NET SALE POSSIBLE * Excellent leasing offers Location and vehicle inspections: Duodoy Evfgopfx Aa Not STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all makes in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer